|
Join Our List
|
|
|
|
|
Dear ,
Our April newsletter is here! This month we cover the following topics. Take a few minutes to review and share with a friend!
- New Fujikura pressure sensors are ready for sampling
- ME780 ceramic pressure sensors
- New sensor signal conditioning IC from ZMDI
- 4 new micropump tech notes have been added
- Updated DC-DC Converter IC's with wider operating supply voltage
If you are unsure of your needs or would like an immediate discussion about your application, the best use of your time is to either call us at 781-862-9572, email at info@servoflo.com, or use our contact us page.
|
|
New AP2/AG2 Pressure Sensors From Fujikura
| |
 This new ASIC sensor from Fujikura comes with a calibrated, temperature-compensated output in various pressure ranges from 0-25 kPa up to 0-1000 kPa. The most significant advantage of this part is the extremely high accuracy of 1.5% full-scale. Aggressive pricing for volume applications. AP2 is the dual-in-line package (8 mm port only). The AG2 is the surface mount version (3 or 6 mm port).
Samples are now available!
Features include:
- 1.5% full-scale accuracy
- 3 mm or 6 mm pressure port for AG2, surface-mount
- 8 mm port, dual-in-line package AP2
- Linear, repeatable, reliable, competitively priced, small package sizes
- Various pressure ranges from 0-25 kPa up to 0-1000 kPa, depending on model
- Pressure type: Gauge pressure / Gauge negative pressure
- Pressure media: non-corrosive gas
- Supply voltage (constant voltage): 5+/-0.25 V
- Output voltage: 0.5 to 4.5 V
- Accuracy options of ±1.5% FS or ±2.5% FS
See the complete specification here
|
|
ME780 Ceramic Pressure Transducer
|  The new ME780 family uses a hybrid technology and Metallux's chip-on-board expertise to have signal conditioning directly integrated on top of the sensor. Together with membrane medium-compatability, the sensors offer a compact solution and precise temperature compensation. The sensor is available in many pressure ranges between 0.5 to 600 Bar, and delivers a ratiometric output of 0.5 to 4.5 VDC. Overvoltage, short circuit and ESD protection included. Applications include medical, process control, industrial automation, automotive and more.
- 0.5-600 bar pressure
- Accuracy better than 1% full-scale
- Temperature compensated -40°C to 125°C
- Media compatible
- Signal conditioned
- High linearity and low hysteresis
- Ratiometric 0.5-4.5V
See the complete specification |
|
Sensor Signal Conditioning IC's
|
|
New Sensor Signal Conditioner IC
| |
 The ZSSC3015 RBicdLite-Auto™ sensor signal conditioner IC is adjustable to nearly all piezo-resistive bridge sensors. Measured and corrected bridge values are provided at the Sig pin,which can be configured as an analog voltage output or as a one-wire serial digital output.
The ZACwire™ digital one-wire interface can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3015 and a specific sensor are mated digitally; fast, precise, and without the cost overhead associated with trimming by external devices or laser. AEC-Q100 qualified.
- Digital compensation of sensor offset, sensitivity, temperature drift, and nonlinearity
- Programmable analog gain and digital gain
- Many diagnostic features on chip: EEPROM signature, bridge connection checks, bridge short detection, power loss detection
- Independently programmable high and low clipping levels
|
|
4 New mp6 MIcropump Tech Notes
| |  We have recently added 4 new tech notes on the mp6 micropump. All are easy to read yet filled with valuable information.
|
|
Power Management/LED Drivers
|
| Updated DC-DC Converter IC's | |
 New versions of the ZSPM4011, ZSPM4012, and ZSPM4013 DC-DC Converters have been posted on our web site. The new versions have a "B" after the model number. The main advantage of these new DC-DC models is they accept 4.5 VDC instead of the previous 6 VDC on the low end of the power supply range. The high end is 18 or 24 Volts, depending on the model.
The 3 models are differentiated by the amperage. The ZSPM4011 is for 1 amp, ZSPM4012 is for 2 amp, and the ZSPM4013 is for 3 amps.
See all buck converter ic's here
|
|
We are now on Twitter, LinkedIn, and Facebook. Convenient links to them as well as our blog are below.     Please send topic suggestions for future issues to seta@servoflo.com.We thank you for your interest in our products. Please feel free to . We look forward to hearing from you.
Best regards,
David Ezekiel
Servoflo Corporation
Tel: 781-862-9572
|
|
|
