|
Dear ,
Welcome to the April Servoflo newsletter. This issue highlights new DC-DC converters, LED driver tools, ZSSC313X sensor signal conditioning IC's, amplified ceramic MEM1164 for water level measurement, and updated information on barometric pressure sensors. If you are unsure of your needs or would like an immediate discussion about your application, the best use of your time is to either call us at 781-862-9572, email at info@servoflo.com, or use our contact us page.
|
|
New Power Management IC Solutions
|
 Servoflo is now offering DC-to-DC integrated circuits for managing power consumption. The ZSPM401X Series are DC/DC synchronous switching regulators with fully integrated power switches, internal compensation, and full fault protection. The switching frequency of 1MHz enables the use of small filter components, resulting in reduced board space and reduced BOM costs. These IC's require only 4 external components! 3 models are available: |
|
LED Driver Tools - Get Help! Save Time!
| |
 Servoflo offers many LED drivers to maximize efficiency in your lighting application. To save you time in searching for the correct part, we've created an LED request form where you can provide technical details about your application, and we can do the searching for you. Utilizing this technique will save you time and help you determine more quickly what the correct part is for your application at no obligation to you.
|
|
New 313X SSIC's for Resistive Bridge Sensors
| |
 Announcing 4 new sensor signal conditioning IC's from ZMDI.
The 313X Series is a family of CMOS integrated circuits for industrial and automotive applications. These sensor signal conditioning IC's can be used with nearly all types of resistive bridge sensors. A family approach allows for the best fitting selection for a cost-optimized application.
Available in RoHS-compliance JEDEC SSOP14 package or as die. Evaluation kits, application notes and mass calibration systems are available. All parts are AEC-Q100 qualified.
The new parts include:
ZSSC3131 for cost-optimized switch applications
ZSSC3135 for piezoresistive bridge sensors
ZSSC3136 for safety switch applications
ZSSC3138 for ceramic sensor applications
|
MEM1164 for Water Level Measurement
|
|
 The new MEM1164 is an amplified, ceramic pressure sensor designed for water level measurement. The pressure ranges vary from 0 - 7 psi up to 0-145 psi. The pressure ranges and output can be modified for cost optimization. The power supply is 4.5 to 5.5 VDC with a ratiometric voltage output of 0.5 - 4.5 Volts. Typical applications include water level measurement in industrial applications, water treatement, tank measurements and white goods.
This part is not on our web site yet, you must contact us with details about your application.
Email us with your application details! |
|
Barometric Pressure Sensors
| |
 Barometric pressure sensors play a critical role in a wide variety of applications. Many sensors and other types of measurement change with barometric pressure. Proper compensation is necessary for optimal system performance.
Our broad range of barometric pressure sensor solutions include amplified, digital outputs to unamplified models. Ported and unported models also available.
We have a new barometric pressure sensor product & pricing guide to assist you.
|
