Valve Accessories & Controls
The VACPAC Product News
VAC Linear Kit
The VAC Linear Kit will be listed in the mounting kit list as the primary kit to use on actuators such as Fisher 657, 667 size 30-70.  The main reason for the change is the VAC linear kit is much easier to adjust and retrofit in the field. The other reason is with the VAC Linear kit you do not need a spacer when using the D400 it works the same for all three of our positioner series.
Below are pictures of a V200 on a Fisher Valve and a picture of just the kit itself.  If you would like more information on this kit please email Tammie, by clicking here.
V200 with VAC Linear Kit
VAC Linear PN 350229
D400 Calibration
When calibrating the D400 we use our fingers or a stylus versus the analog positioners (V100 and V200), where a screw driver is used to turn a range spring.  VAC made a short clip showing how to calibrate the unit and the simple steps to follow when mounting the positioner.
Please email Randy for suggestions on the next VAC Video.  Click here.

D400 Calibration
D400 Calibration
Quick Survey Question
Click below for a simple poll question regarding gauges and filter regulators.

Issue: 17



The summer is almost here!!!  Can you believe it where did the time go? 
In this edition of the VACPAC we will be discussing the VAC Linear bracket for linear actuators, spool valve options for the V200, training dates, quick calibration video of the D400, and a poll question.  As always if you have any questions please contact VAC. Please remember that we will be closed Monday, May 27th in observation of Memorial Day.
V200 Spool Valve
The V200 has under gone some changes to better the product line.  To read more about exact changes click here
An additional improvement is we have stream lined the spool valve options.  There will be three choices, the standard spool will now be the low bleed version delivering 28.3 SCFM of air at 87 psi while only consuming <.2 SCFM @ 87 psi.  The next option is the high gain spool (HG), delivering 31.5 SCFM @ 87 psi and a gain ratio of 1100:1  and then the super high gain/high flow spool which delivers 50 SCFM @ 87psi. 
If you have any questions on any of these spool valves please let us know.  


May 2013 Training Class
On May 7th and 8th VAC hosted its day and a half training class for customers from all over the country.  Pictured from left to right: Joe Milam-Miller Valves, Alex McRee-Miller Valves, Frank Flow-DW Prouty, Brandon Salisbury-AT Controls, Tyler Norwood-VAC, Matt Schrock-DW Prouty and Jake Ogle-Wolseley, TN.. We want to thank everyone for attending, the next class will be October 15th and 16th. Spots will fill up fast.  Please contact Tammie if you are interested. Click here to email her.



Thank you for your continued support of our product line.  If you have any questions or would like to get more information such as product brochures please call us at (205) 678-0507.

You may also visit our website for more information, (click VAC to be redirected)  Valve Accessories & Controls.



Randy Estes
Valve Accessories & Controls

Find us on Facebook 
Join Our Mailing List