|
|
|
|
|
|
Tip of the Month
Just when you thought you knew everything about thread sizes....
Here is some information that might interest you.
 | |
Locknut Tap
|
Did you know there are threads that are extra fine, designed especially for bearing locknuts sizes?
Bearing locknuts are also referred to as shaft or withdrawal nuts, depending on their use. They are used to locate bearings and other components onto a shaft as well as to facilitate mounting bearings on tapered journals and dismounting bearings from withdrawal sleeves.
Looking for information on bearing locknut sizes?
Trying to figure out what size you need?
Here is a table for inch sizes.
Locknut taps and dies are for creating or repairing bearing locknut threads.
Newman Tools stock all the locknut taps from N03 to N10.
We also can supply Hexagon Bearing Locknut Dies For Locknut #00 thru #30; Sizes .391-32 thru 5.888-12.
Here is the shopping cart
All our bearing locknut taps and dies are made in the USA
|
|
Does Your Lapping Compound Imbed?
Well ours does not!
 | |
Time Saver Lapping Compound
|
 | |
Time Saver Lapping Compound
|
Timesaver Lapping Compound
is guaranteed not to imbed - will not continue to cut!!
Time Saver Lapping Compound first acts as an abrasive, followed by the particles diminishing to a polish and finally to an inert material.
- does not contain emery, aluminum oxide, silicon-carbide or similar charging abrasives
- unconditionally guaranteed not to imbed into any metal surface
- easy to prepare as it comes in powder form and is mixed with oil
- clear instructions with each can
The soft metal lapping compound is great for lapping babbitt, brass, bronze and aluminum.
The hard metal lapping compound is fantastic for lapping cast iron, steel and bronze
For more information or to purchase timesaver Lapping Compound please click here
Newman Tools can be reached at: 1-800-465-1384 (Canada and the USA) or 1-613-836-6776 for more information.
|
Have you ever heard of Port Contour Cutters? | | Port Contour Cutters |
Port Contour Cutters are: - Port Tools that are ground between centers to ensure absolute concentrically.
- They are made from heat-treated alloy steel with brazed carbide inserts.
- They are designed to enlarge a pre-drilled hole and easily produce a complex form.
- Port Tools can be used for both lathe and mill application.
To purchase this item please click here.
Please click here to find out what other types of Port Counter Cutters we sell .
For additional information Newman Tools can be reached
|
|
Joke
We would like to thank Dale Krushel for this joke. He will receive a Newman Tools Swiss Army knife for his contribution.
Selling Bibles
A pastor concluded that his church was getting into very serious financial troubles. While checking the church storeroom, he discovered several cartons of new bibles that had never been opened and distributed.
So at his Sunday sermon, he asked for three volunteers from the
congregation who would be willing to sell the bibles door-to-door for $10 each to raise the desperately needed money for the church.
Jack, Paul and Louie all raised their hands to volunteer for the task.
The minister knew that Jack and Paul earned their living as salesmen and were likely capable of selling some bibles. But he had serious doubts about Louie who was a local farmer, who had always kept to himself because he was embarrassed by his speech impediment.
Poor Louie stuttered badly. But, NOT WANTING TO discourage Louie, the minister decided to let him try anyway.
He sent the three of them away with the back seat of their cars stacked with bibles. He asked them to meet with him and report the results of their door-to-door selling efforts the following Sunday.
Anxious to find out how successful they were, the minister immediately asked Jack, 'Well, Jack, how did you make out selling our bibles last week?'
Proudly handing the reverend an envelope, Jack replied, 'Using my sales prowess, I was able to sell 20 bibles, and here's the $200 I collected on behalf of the church.'
'Fine job, Jack!' The minister said, vigorously shaking his hand... 'You are indeed a fine salesman and the Church is indebted to you.'
Turning to Paul, 'And Paul, how many bibles did you sell for the Church last week?'
Paul, smiling and sticking out his chest, confidently replied, 'I am a
professional salesman. I sold 28 bibles on behalf of the church, and here's $280 I collected.'
The minister responded, 'That's absolutely splendid, Paul. You are truly a professional salesman and the church is indebted to you.'
Apprehensively, the minister turned to Louie and said, 'And Louie, did you manage to sell any bibles last week?' Louie silently offered the minister a large envelope.
The minister opened it and counted the contents. 'What is this?' the
minister exclaimed. 'Louie, there's $3200 in here! Are you suggesting that you sold 320 bibles for the church, door to door, in just one week?'
Louie just nodded.
'That's impossible!' both Jack and Paul said in unison. 'We are
professional salesmen, yet you claim to have sold 10 times as many bibles as we could.'
'Yes, this does seem unlikely,' the minister agreed. 'I think you'd better explain how you managed to accomplish this, Louie.' Louie shrugged... 'I-I-I re-re-really do-do-don't kn-kn-know f-f-f-for sh-sh-sh-sure,' he stammered.
Impatiently, Peter interrupted. 'For crying out loud, Louie, just tell us what you said to them when they answered the door!'
'A-a-a-all I-I-I s-s-said wa-wa-was,' Louis replied, 'W-w-w-w-would y-y-y-you l-l-l-l-l-like t-t-to b-b-b-buy th-th-th-this b-b-b-b-bible f-f-for t-t-ten b-b-b-bucks ---o-o-o-or--- wo-wo-would yo-you j-j-j-just l-like m-m-me t-t-to st-st-stand h-h-here and r-r-r-r-r-read it t-to y-y-you??'
If you would like some more laughter in your life click here.
Note: Some of these jokes are generally more questionable or raunchy.
If we choose to print your joke you will receive a Newman Tools pen.
|
|
|
|
|
