|
Join Our List
|
|
|
|
|
Dear ,
Welcome to our August newsletter. We have some exciting new products to announce. First, we have a new Intersema part, MS5701 which is a low pressure sensor with a digital output. Next, we are announcing a new line of LED drivers offered by ZMD. We also offering a part by ZMD which is pin-to-pin compatible for TI and Maxim parts which are currently on backorder. Lastly, we have an announcement regarding Microbridge ultra low pressure sensors. If you are unsure of your needs or would like an immediate discussion about your application, the best use of your time is to either call us at 781-862-9572, email at info@servoflo.com, or use our sensor selector tool.
With hundreds of pressure sensors to choose from, we would be happy to discuss your application at no obligation to you.
|
MS5701 Measures +/- 2.5" H2O With Digital Output
| |
 Servoflo is pleased to announce the
MS5701 low pressure sensor with an I2C or SPI digital interface.
Available in either differential or gauge models, the MS5701 can measure as low
as ±2.5" H2O up to ±10" H2O in a differential
version. The gauge model comes in ranges from +2" H2O to +20" H2O.
Using the latest in MEMS
technology, the MS5701 has a low supply voltage of 1.8 to 3.6V with a 1 mA power consumption. Furthermore, the MS5701 pressure sensor
has a high resolution of 0.0004" of water (0.001 mbar) and a fast conversion of
0.54 milliseconds. A 24-bit pressure and temperature output allows for
integration to any microcontroller. The I2C or SPI interface
communicates up to 20 MHz.
Typical uses for
the MS5701 include HVAC, respirators, ventilators, CPAP & sleep apnea, leak
detection, liquid level metering and more.
The MS5701 low pressure sensor
is priced at $18 each in quantities of 1,000.
Review the complete specification |
|
New LED Driver Line Offered By Servoflo
| |
 Servoflo
is pleased to announce three new energy
efficient LED driver ICs from ZMDI of Germany. The drivers achieve up to 95%
efficiency and demonstrate a commitment to green technology.
ZMDI's
LED driver portfolio is designed for all types of internal and external
lighting applications. The ZLED7000 and ZLED7010 drive single or multiple LEDs
from a supply voltage range of 6 to 40 volts, using continuous-mode inductive
step-down converters. The ZLED7001 is a peak current mode control LED driver
which operates within a wide input range from 8VDC to 450VDC or 110VAC /
220VAC, making it ideal for direct line-powered applications. All three devices
have a very small footprint and are highly integrated thus enabling a very low
bill of materials (BOM) cost.For
all three devices, full application kits including application notes and an
evaluation board are available now. The ZLED7000 comes in a SOT89-5 package,
making it ideal for space-constrained applications such as signage or specialty
architectural lighting. The ZLED7001 and ZLED7010 are available in a SOP-8
package. All three devices are available in mass production now. Read the complete set of specifications. |
Pin-to-Pin Replacement for TI or Maxim
|
|
 Are you looking for a pin-to-pin replacement for TI ADS7844 or Maxim
MAX147? The ZMD ZADC147IS20T is a pin-for-pin replacement for these
parts!
The ZADCS146 and ZADCS147 are 12-bit analog-to-digital (A/D)
converters with up to 20ksps conversion rate. The converter is based on
successive-approximation-register architecture.
Both have an 8-channel input multiplexer and a high-bandwidth
track/hold circuit. All analog inputs are software configurable as eight
single-ended or four differential analog input channels are well as for
unipolar or bipolar output coding.
The ZADCS146/ZADCS147 operate from a single +2.7V to +5.25V supply.
Both models use either the external serial-interface clock or an
internally generated clock to perform successive-approximation
analog-to-digital conversions. The ZADCS146 is equipped with an accurate
internal 2.5V reference with an additional external ±1.5% voltage
adjustment range.
The device provides a hard-wired shut-down pin (nSHDN) and
software-selectable power-down modes to automatically shut down the IC
at the end of a conversion. Accessing the serial interface automatically
powers up the ZADCS146/ZADCS147. A quick turn-on time allows the device
to be shut down between measurements. Both version are available in
standard 20 pin SSOP package for industrial temperature range of -25°C
to +85°C.
Read the complete specification
|
New Pricing From Microbridge
|
|
 This month we are highlighting low pressure measurement from Microbridge. We are pleased to announce new LOWER pricing on this line.
Microbridge pressure sensors are a microflow device which are extremely sensitive at very low pressures. With pressure ranges measuring as low as +/- 0.1" of water, Microbridge sensors are excellent for the most demanding applications such as respirator and breathing applications, specialized HVAC, ultra low flow measurement and more.
Learn more about Microbridge Ultra Low Pressure Sensors
Contact us about new Microbridge pricing
|
|
We thank you for your interest in our products. Please feel free to forward to a friend. We look forward to hearing from you.
David Ezekiel
Servoflo Corporation
Tel: 781-862-9572 |
|
|
