Surveys/Classified ads and more
 



28th July 2014
 
This week's survey 
 
(These survey questions are sent in by our readers. Please spend a minute to give your answer to this week's survey as one or possibly more of your industry peers thinks this question is important and wishes to see your point of view as well as others in the industry.)  
 

  

Last week's survey results...

Have you ever had to make a warranty claim on failed media or anything else? Did you claim for wasted labour as well?

  

  

  • Most certainly have. Generally if you have a good relationship with your supplier they will only ever warranty the goods, not the labour, although they may offer a small amount of additional materials if you're lucky.

  • I did experience this, but couldn't tell the media was faulty until it was applied. Spent some time prepping the media and surface only to find it was faulty. Took photo's for evidence and brought the remaining media back to the supplier for assessment. Supplier replaced this and again, I prepped the media, removed the faulty application and re-applied ONLY to find out the replacement given was also faulty!! Colourful language was used but not directly to the supplier who once again replaced the media and gave extra's.
    I didn't claim any labour time (in which I should of!), but this supplier has been really good and generous throughout the years I've been with them so I think this has stopped me from claiming for wasted labour time.

  • No, I guess we have been lucky to date.

  • Plenty of warranty claims, the best I have been offered is stock to the value of the labour I have claimed. Mostly, labour is not covered

  • Yes I have. I have claimed for replacement material and the supplier is disputing the claim so it's scheduled for the Magistrates Court. The strange part is that we have both spent 4 times the amount of claim in legal fees. They have lost me as a customer also, so they are the real big losers for not honouring a product failure after recommending it.

  • Yes we've claimed for additional admin time, we've had a lot of print heads fail over the last 12 months. After lodging claims through the redress program, set up after the ACCC findings, we were rewarded.

(As a publishing practice to protect ourselves from any potential liability, company names that are referred to negatively are removed)


You can view all the surveys we have done by clicking here.

 

 

Please spend a minute to give your answer to this week's survey as one or possibly more of your industry peers thinks this question is important and wishes to see your point of view as well as others in the industry.

 

If you have a subject that you would like us to survey, please send your subject to [email protected]. Thanks.) 

 

Some recent requests - can anyone help??

1) I'm after roland print heads and dampers live in Melbourne can anybody assist? 0431404607

2) Im looking for someone who can repair a fletcher substrate cutter. Can you advise of any company that can do this. [email protected] 

2nd Hand Machinery/Auctions.

-----------------------------------------------

If you would like to run an ad in this section, just click here for the free ads.
(We reserve the right to reject ads if they are not genuine 2nd hand machinery, or auctions)

Photos can be added  at $12.00 + GST each, 

Send the photo to [email protected].
(Dealers, click here if you wish to advertise refurbished, marked down or trade in machinery)


New South Wales

 

(NSW, St Leonards) HP Designjet 5500 (60") & HP Designjet 5000 (60"). Some ink (dye) and printheads. Think they still work. Make an offer.

Bruce 0412 926 893

(Posted 24th July 2014)

 

(NSW, Broken Hill) Graphtec CE6000 for sale. Only 3 years old. Selling due to business closure in 2012. Little use great machine. Will freight $2300   Contact Ray on 0455 255 936

(Posted 20th July 2014)

 

(NSW, Blacktown) Canon iPF8000 44" 12 colour printer, Prolam 1370mm wide hot and cold laminator & mounter and Neolt DT150 trimmer w stand. Include very high ink levels, 3 spare carts, 3 boxes HP poster paper, canvas bars and more. Serious offers considered.

0406130108

(Posted 19th July 2014)

 

(NSW, Nelson Bay) EPSON Stylus PRO 11880 64" Large Format Colour Printer. Recently serviced by an authorised Epson Agent in Newcastle. Report was that the printer was working well, no problems. Bought for a project that didn't happen. NELSON BAY NSW $7,500

0438337135

(Posted 16th July 2014)

 

(NSW, Artarmon) HP Designjet 5000, Dye Ink 6x Colour machine. Complete with full set of inks and spare head set.

In complete working order - make an offer to Gary - 0413498148
(Posted 16th July 2014) 

 

(NSW, Artarmon) - Teka Charcoal Filtering system to suit solvent printers - made in Germany.

Make an offer - Gary 0413498148

(Posted 16th July 2014)

 

(NSW, Illawarra) (Used) Epson 7800 , Private Use, Excellent Condition. $800 of ink in the printer and $1000 of spare ink cartridges. $3250 Andrew - 0400056540

(Posted 8th July 2014)

 

Wanted (NSW, Sydney) wanted kip 7000 series b/w plan printers for Egypt export.regardless of linear meterage, just must be complete and working.will pay up to $2000.00 plus for each system

0413 007 913

(Posted 8th July 2014)

 

(NSW, Sydney)- FREE (use for parts). I got an old Canon W8200 wide format printer which it wont power up anymore. The power supply/mainboard may be damaged.

Free - Just take it off my hand.

Richard - 0433778252

(Posted 25th June 2014)

 

(NSW, Moorebank) (Demo) Roland VS-540 2XCMYK + TUC/TU264 Printed less than 1 roll, warranty until 11/10/16: $21,992+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(NSW, Moorebank) (Demo) Roland XR-640 CMYKLcLmLkW + DU640 As new, used for 1 trade show, 5 Year Warranty, includes inks currently installed: $32,645+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(NSW, Moorebank) (Demo) Roland XF-640 CMYK + DU264 + TU364 As new, used for 1 trade show, 5 Year Warranty, includes inks currently installed: $32,645+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(NSW, Moorebank) Roland VS-640 2XCMYK + DU640 + TU264. Fully optioned, very well maintained and loved machine, warranty extension still available. $19,525+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(NSW, Moorebank) Roland XJ-640 CMYKLcLm + DU640 Well looked after machine with full history, printing very well. $14,300+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(NSW, Blacktown) Canon iPF8100 12 colour pigment inks 44in printer, Hot Shoe and Cold Laminator and 1500mm wide Trimmer.

0406130108

(Posted 20th June 2014)

 

(NSW, Gorokan)  Spare brand new bulk ink system 4 and 8 ink cartridges with ink bottles floats hoses connectors & housing fit mimaki roland mutoh 4 colour $150 permanet chips $25 1 lot of each. solvent flush 1 ltr bottles $50 3 only !

TREV 0478830106

(Posted 12th June 2014)

 

Wanted (NSW, Frenchs Forest)Wanted: 3m wide printer.

0417 066 760 or (02) 99717708

(Posted 11th June 2014) 

 

(NSW, West Gosford) Mutoh ValueJet , Model VJ-1304-K4 , Dye Sublimation , bulk feed system ,good condition but needs new maintenance assembly , app $1100 to replace. Asking $2000

Contact Shane , 0409 926 083

(Posted 10th June 2014) 

 

(NSW, Coffs Harbour) Roland FJ-50 HiFi Jet circa 2000. Always covered, can be converted to solvent use. Offers

Tel: 0412 618 145

(Posted 10th June 2014) 

 

(NSW, Baulkham Hills) Keencut Steeltrack 210 twin head cutter, purchased new in December 2013 but replaced with CNC Router so now surplus to our needs. $4000+gst

Tel: 02 8814 7627

(Posted 9th June 2014)

 

(NSW, Turramurra) Hewlett Packard Z3200 24" Graphics Printer (Q6718A) 12 colour Z3200-
2A1 printer refurbished $2800.00 Inc GST.

 

Hewlett Packard T2300 EMFP (CN728A) refurbished, with AO scanner, has only done 346 AO Prints in perfect condition $8000.00.

Call 02 94498717 - Inspection invited.

(Posted 7th June 2014)

 

 

 

 

 

  

(NSW, Penrith) Seiko Printer for sale, great condition. Comes with new inks and software. Inspections welcome. Photos supplied upon request. $10,500 ono

Tel: 0414477334

(Posted 4th June 2014)

 

(NSW, Marrickville) AGFA Anapurna MW 1600mm wide printer with roll option. 6 colour with WHITE ink, Wasatch RIP software & Pulford compressor. In top condition and demo available.35K ONO

Tel: 0295198340

(Posted 29th May 2014)

 

(NSW CASINO) Complete sublimation setup, Ricoh gel printer,hat press,plate cups,machines $3.500, stock $3.400, stock sheets, sell lot $5000, [email protected] or 0402 584 052

(Posted 28th My 2014)

 

(NSW, Thornleigh) HP Designjet 5500 42" UV/Dye tube kits, includes: Take-Up Reel, Some UV Inks and Printheads, surplus to our needs. $1,500.00. 0419 264 975
(Posted 6th May 2014)

 

(NSW, Gosford) Gerber Edge 2. Gerber Sprint plotter & Omega software. Computer & monitor included with everything running. Corel X5 and Signtools 4 installed as well. Gas struts need regassing on Edge printer and plotter getting power supply repaired otherwise all good working order. Have foils of varying colours and lengths included. $7500. 0415 126 484
(Posted 5th May 2014)

 

 

(NSW, Sydney) HP Designjet 800 good running condition for sale $ 1800 inc. GST. for pickup only.

02 262 4144

(Posted 9th April 2014)

ACT

(ACT, Fyshwick) Fujifilm Acuity Advance

(rebranded Oce under licence) flat bed and roll to roll UV printer. CMYK + White. Purchased second hand in September 2011 and can view working.
Print direct to composite sheet, corflute, acrylic, glass etc. Selling due to upgrade.
Flatbed 1.25m x 2.5m and roll up to 2.1. Software - Production server 6. Selling with associated spare parts.
Buyer to remove at their cost. $40,000.00 + GST Priced to sell.

Contact Jon Loiterton, Signs Letters n Lines, Canberra, 02 6239 1313, 0418 627 536, [email protected]  

(Posted 19th May 2014)

Victoria

(VIC, Somerville) Vinyl cutter Cammpro GX540 

need to sell as upgraded to the GX640. Barely worked over the past 3 years as we are mainly print and use it for 2 clients work.

0417 017 875

(Posted 16th July 2014)

  

(VIC, Werribee) Roland VersaUV LEF-12 printer,

CMYK+White+Gloss, as new condition, includes filtration unit-stand, VersaWorks software, sundry cleaning and substrate consumables, service history and warranty, workstation available, $23,000 neg. (RRP = $30,000+), David 0439 576 947.

(Posted 9th July 2014)


(VIC, Sunshine West) FOR SALE: 18 month old HP FB700 Flatbed printer f
or sale. It has a 2.5m wide print width with also roll to roll, extended tables and white ink upgrades included. We are selling due to an upgrade to a faster press. Because of the work this printer has brought in it has grown our business considerably. Printer is located in VIC and is still under warranty.
Speak to Jamie at 03 9315 1664
(Posted 30th June 2014)

(VIC, Dandenong) (Demo) Roland XF640 - 2xCMYK

and 5yrs Heads and All warranty. As new: $32,650+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) (Demo) Roland SP540i CMYK -

As new: $18,430+gst includes take up: $2,495 and ink: $340. 

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) (Demo) Roland Flat bed LEJ640 CMYKWhCl 

with Extraction Unit: $45,995+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) Mimaki JV5-160s (2006)

As is, recent service report available 2 new heads: $5000+gst ono.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) Roland VS640 2xCMYK: $21,000+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) Roland VS540 CMYKLmLcMtWh

with first gen take up: $18,850+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) Roland XC540 2xCMYKWhWh:

$16,500+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Dandenong) Roland XC540 2xCMYKLmLc:

$15,000+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(VIC, Boronia) Cold Laminator 1400 wide; Royal Sovereign : RSC-1400C;

Surplus stock - Used & worn and still works. Rollers may need to be reconditioned .

Call to discuss in detail.0432 348 819

To buy Brand new around $7000+

******************************************

$1500 ,a bargain for this type of machine.

0432 348 819

(Posted 24th June 2014)

 

(VIC, Melbourne) Ex-demo Roland LEF-12 Benchtop LED UV

flatbed printer with accompanying fume extractor/air filtration unit FOR SALE in MELBOURNE Vic. $18,500 Less than 12 months old, immaculate condition, originally purchased from reputable company Conect Enterprises. Delivery not included. Pls organise local pick up or own courier

0402286333

(Posted 24th June 2014)

 

(VIC, Melbourne) An excellent Roland SP-300V

(760mm) for sale, serviced & ready to print. Includes the amazing Jetbest Premium inks, can assist with transport and any tech. support required @ $6,500 inclusive

Tel: 0447 040 700

(Posted 16th June 2014)


(VIC, Hawthorn) KEENCUT EXCALIBUR 5000

SUBSTRATE CUTTER $2,750 - cuts corflute, PVC, foam board, etc. Score acrylic, glass, ACP

Rarely used. Call Steve 0418 820 288

(Posted 10th June 2014)

 

(VIC, Chelsea) Various Screen print; Digital and Finishing Display equipment Surplus to ongoing production requirements.

Offers considered. Available ex South East Melbourne.

* Sias Multiformula 2 Colour UV Ink machine & Dryer line;

* Plastic Vacuum Form Machines;

* Crest Foamboard Cutter;

* Sonic Welder;

* HP 5500 Digital Printers (4);

* HP 10000 Eco solvent Digital Printers (2)

* Hydraulic Press

* Shrink Wrap machine;

* Mobile Gluing Trolley / machine;

* HP Z6100 Digital Printer;

* Seiko H74-s Digital Printer.

Contact:- Andrew Smoker - Email preferred [email protected] 

or Phone : 03 8769 0107

(Posted 10th June 2014)


(VIC, Woodend) Epson dx-4 printheads with head rank numbers.

Purchased 4 for replacement, only used 2. New, never used still in packets from supplier. $900.

0405504644 - Mick

(Posted 7th June 2014)

 

(VIC, Sunshine West) BARGAIN MUST SELL!!! 2010 Inca Spyder V

(4 Colour & White) digital flatbed Printer and accessories. Comes with recently installed brand new heads with spares, rip hardware package and colourgate production server.

Serviced by Fujifilm Australia every three months.

Service support and spare parts are available for the next 7 years, Production capabilities of 50SQ.M. Per Hour at Production specification selling due to upgrade.

Asking $60,000.00+GST

Tel: 03 9311 9755.

(Posted 4th June 2014)

 

(VIC, Werribee) Roland VersaUV LEF-12, CMYK+White+Gloss, as new condition, includes filtration-unit stand, VersaWorks software, sundry cleaning and substrate consumables, workstation available, $25,000 incl. del. & GST (RRP = $30,000+), David, 0439 576 947.

(Posted 29th May 2014)

 

(VIC, Carrum Downs) Roland SP-540V Print/Cut - Perfect Working Order. Recently Serviced before Easter and serviced every 6 months. Comes with ink almost full plus spare set of ink cartridges. Always used Genuine Roland ECO SOL MAX ink. Full roll of 54" vinyl + some other media. $7500

Tel: 0477 831 296

(Posted 21st May 2014)

 

(VIC, Narre Warren) Dye Sub Heat Press twin shuttle 2500mm x 1250mm vacuum beds. Mimaki JV22 textile printer with bulk ink system running KIWAjet inks Very good condition $49K will separate ph: 0412 515 868

(Posted 21st May 2014)

 

(VIC, North Melbourne) Konica Minolta Bizhub Pro C6500, working perfectly, Print speed 65 PPM. Prints paper from 65gsm to 300gsm,also prints size up 320x900mm long banner, it comes with Fiery Rip and Lots of Spare Toner. Tel:  03 93293833

(Posted 20th May 2014)

 

(VIC, Melbourne) For Sale Kala Bunny laminator

760m wide great condition $3500 contact Nick 0418 104 324


(VIC, Melbourne) For Sale summa cutter S75

T series great condition sale price $4500 ONO contact Nick 0418 104 324.

(Posted 14th May 2014)

 

(VIC, Bayswater North) HP Designjet Z2100

photo 44inch x2, $1500 for both, one working one not. contact  0422003060

(Posted 14th May 2014)

 

(VIC, North Melbourne)Offset Printer, Heidelberg GTO 52

1983 with compact dampening system, in excellent working condition $7000+GST

Tel: 03 93293833 

(Posted 13th May 2014)

 

(VIC, North Melbourne) Folding Machine Shoei Slient KT52

(made in Japan) 1997 with cross folding A3-DL, in good working condition $7000+GST. Tel: 03 93293833

(Posted 13th May 2014)

 

(VIC, North Melbourne) CTP Screen Plate Rite 8300E

A1 CTP 2009 with on line processing and plate stacker, still in production, $70,000+GST. Tel: 03 93293833

(Posted 13th May 2014)

 

(VIC, North Melbourne) Solvent Printer

6 years old, width upto 3.2m, 6 colours Konica Minolta Print head 512, Resolution upto 720x720 dpi. excellent working conditions. Free accessories and ink approx. 20 litres.$3000+GST Tel: 03 93293833

(Posted 13th May 2014)

 

(VIC, North Melbourne) HP 5000 Designjet

x2pcs, 6 colours Printing width 1500mm with decoding chip working compatible with 3rd colour ink. Can be used for spare parts. $1000+GST.Tel: 03 93293833

(Posted 13th May 2014)

 

(VIC, North Melbourne) AGFAjet Sherpa 43 (Mutoh),

2nd hand, never used since last maintenance by AGFA. 6 colours Piezo print head. $500+GST. Tel: 03 93293833

(Posted 13th May 2014)

 

(VIC, North Melbourne)Audley Cold auto laminator

1600mm width good conditions, Max thickness:25mm, Max width: 1600mm, Heating Way : infrared heating,Speed : 0--7m/min,$2500+GST Tel: 03 93293833

(Posted 13th May 2014)

 

(VIC, North Melbourne)Shrink Wrap Machine

x2PCS, Made by Heatshrink Australia Pty Ltd. One is working, the other can be repaired. Together ONLY $500+GST Tel: 03 93293833
(Posted 13th May 2014)

 

(VIC, St Kilda) Gravotec FC3100-120 plotter/vinyl cutter.

In good working order. Can view working. Requires Flexi software (also avail for sale separately) $1200 04371952187

(Posted 2nd May 2014)

 

(VIC, Geelong) Wide Format Roland XJ 640 Pro 3

High Speed Printer in excellent condition. Warranty till Jan 2017. Prints 1600mm wide with take up & extra blower/ heater unit. Recently serviced- always been serviced by Roland Technicians, using genuine ink with perfect head status.$15000.00 Please feel free to contact me on 0418133146.

(Posted 28th April 2014)

 

(VIC, South Yarra) Mimaki JV3-160

running HS inks. In working order. Needs new Yellow head. Good for spare parts. Quick sale required as it is taking up space. $500 (0414 538 274).

(Posted 23rd April 2014)

 

Wanted (VIC, Torquay) WANTED. Good quality working cold LAMINATOR.

Must be wide enough for 1370 prints. Need another machine for the busy periods. Tel: 0412 290 659

(Posted 22nd April 2014)

 

(VIC, Melbourne) Large IR conveyor dryer - 3 years old. Electric dryer for garment printer. Welcome to view machine working. 32 A current / 240V. Manual included.
Tel: 0422.485795
(Posted 3rd April 2014) 

  

(VIC, Melbourne) Buy equipment to set up a garment screen printing business. 8 colours screen printer, gas dryer, screens, free paints and operator available if required . Make offer after inspection.
Tel: 0422.485795
(Posted 3rd April 2014)

 

(VIC, Melbourne) Automatic Exposure Unit. Currently using this in production. Buyer is welcome to view machine working. 32 A current / 240V.Excellent condition. $2000 or NON
Tel: 0422.485795
(Posted 3rd April 2014)

 

(VIC, Melbourne) Big Oven for Drying. Currently using this in production. Buyer is welcome to view machine working. 32 A current / 240V. Excellent condition. $1100 or ONOTel: 0422.485795
(Posted 3rd April 2014) 

 

   

Send an ad - click here
Queensland


(QLD, Ipswich) Assorted vinyl,photo paper,laminate for sale $2,000ono. Pick up only. QLA Ipswich. 32826223

(Posted 22nd July 2014)


 

(QLD,Kingaroy) EZY TAPER, wide format laminator, 1500 wide on  stand with roller tray and collector basket, Works perfectly, Bottom roller has some nicks/cuts but doesn't interfere with operation, $2500

Call  0419 627499 for further information.

(Posted 22nd July 2014)


 

(QLD, Gold Coast) Mutoh VJ 1680Hybrid-E Needs some work, Flatbed Tables, take up bar, bulk ink system, some ink included. $1500 ono (neg)

0431 255 657

(Posted 21st July 2014)

 

(QLD, Brisbane) Brand New Epson Surecolor s30600 64inch printer. Full set inks, cutting table and some media supplied. $18000, call Eliza 0478001606.

(Posted 15th July 2014)

 

(QLD, Underwood) Epson GS6000 digital printer. Good Condition. A couple of nozzels of Magenta missing. Still prints fine apart from that.

07 3208 6744

(Posted 2nd July 2014) 


 

(QLD, Waterford West) Print & Cut VS640 with Takeup Roller, serviced 6 monthly by Sign Essentials. Excellent condition. About to upgrade and have no room for the machine otherwise I'd keep it. CCMMYKLcLm combination. $17,000

0419 722 199

(Posted 30th June 2014)


 

 Wanted (QLD, Brisbane) Wanted Roland Printers for spare parts. Will pickup. Phone 1300 423 826. 

(Posted 26th June 2014)


 

(QLD, Sunshine Coast) Onyx Production House licensed USB dongle and software licensed for 4 printers upgraded to current software version 11

Access to printer install library from onyx for most printer install profiles and drivers available. Priced $2,850.00

Phone: 0754742100

(Posted 25th June 2014)


 

(QLD, Underwood) (Demo) Roland VS-640i CMYKLcLmLkW + TUC/TU264 As new, used for 1 trade show, 3 Year Warranty, includes inks currently installed: $25,140+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)


 

(QLD, Underwood) (Demo) Roland XR-640 CMYKLcLmLkW + DU640 As new, used for 1 trade show, 5 Year Warranty, includes inks currently installed: $32,645+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)


(QLD, Underwood) (Demo) Roland XF-640 CMYK + DU264 + TU364. As new, used for 1 trade show, 5 Year Warranty, includes inks currently installed: $32,645+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)


 

(QLD, Underwood) (Demo) Roland RE-640 CMYK + TU264. As new, used for 1 trade show, 3 Year Warranty, includes inks currently installed: $17,200+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)


 

(QLD, Underwood) Roland XC-540 CMYKLcLm + DU540. Well looked after machine

with full history, printing very well. $14,300+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Dan on 0448 888 128 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)


 

(QLD, Gold Coast) Roland Soljet pro SJ 740 Printer for sale $5900

XC-1600 Wide Format Printer For Sale $5900

Both machines need servicing to work correctly.

Tel: 0408 941 832

(Posted 23rd June 2014)


 

(QLD, Noosaville) Mutoh Toucan Full Solvent Printer, prints up to 2.2metres wide. 4 or 6 colour printing no laminating required,

full roll feed and take up unit, in working order $1000

Sunshine Coast - Chris 0418 411 544

(Posted 18th June 2014)


 

(QLD, Gold Coast) SUPER SPECIAL MIMAKI  JV3 130 SP 2T  ECOSOL PRINTER 

1300 WIDE PRINT   NO ROOM IN PREMISES ANY MORE
Mimaki Media take up system 

This beautiful  printer prints perfectly .2.NEW HEADS..AND DAMPERS  

Kept in excellent, clean condition in dust proof room. NOT dirty factory ..

BULK INK SYSTEM and 33Lt  of quality inks (ITINK) in  1litre bottles with it.

13 Yellow 4 Red  3 Black  13 Cyan worth $200 each plusGST ($6,400 value free).

At least 2 years supply of ink

PLUS  a Techa GmBh  German power charcoal air filter for clean air ($1000 value)

$7,000  for the lot........   bargain of the century  .......

That makes the printer $600 after ink

Includes the program (Mimaki Raster link SuperPro 3), and dongle

0418 321943   GoldCoast   must pick up !

(Posted 16th June 2014)

 

(QLD, Kingston) Roland print&cut SC-540 stored and used in aircon room only. Just had $500 spent in servicing. No longer required by business priced to sell $5000

Tel: 0414304887

(Posted 12th June 2014)


 

(QLD, Sunshine Coast) Roland Versacam vs 540 just under 3 years old brand new head installed always serviced by roland tech. selling due to upgrade to a bigger machine $13500 ono

Tel: 0411415085

(Posted 12th June 2014)

 

(QLD,Gold Coast) Ex demo dgen soft signage printer(2010), perfect condition with all good 6 printer heads(Roland engine)Wasatch,74" wide. $28,000+gst. call chis 0426877988

(Posted 5th June 2014)


 

(QLD, Gold Coast) Epson surecolor 30600 64 Inch.

Printer is 18 months old, has recently received a service and had a new print head fitted. $15,000

Tel: 0478001606

(Posted 2nd June 2014)


 

(QLD, Gold Coast) Roland CAMM-1 Pro GX-6400  for sale. Purchased approximately 12 months ago, never used.

$6500

Tel: 0478001606

(Posted 2nd June 2014)


 

(QLD, Burleigh Heads) MUTOH VALUEJET 1300 WIDE ECO SOLVENT PRINTER NEW HEADS JUST SERVICED.INKS,TAKE-UP ROLLER,SOFTWARE $4380ono

0412040041

(Posted 2nd June 2014)


 

(QLD, Maryborough) Universal Versa Laser 40 watt laser engraver / cutter. Has just had new laser installed and full service, receipts for around $8k. Comes complete with stand and computer. Warranty on laser tube. 813mm x 457mm cutting area. Comes with rotary engraving device $27,000 Tel: (07) 4123 3090

(Posted 21st May 2014)


 

(QLD, Townsville) 4 Post Screen Printing machine. Manufactured by...Jasbro, Burleigh Heads. Model...4 posti-sx1;Serial...0401091; 415 volts 10 amps; 60" x 40"; 4 post flatbed; Semi automatic printing machine; Machine is in good working order & good condition; Flat undamaged vacuum bench; Strong vacuum; Smooth action table with foot pedal; 2 of 60" x 40" 100T aluminium frames; 1 set, squeegees & flooder 1050 long 1 set, squeegees & flooder 600 long; Machine approx 2.5 tonne; Can be forklift loaded; Comes with operating instructions. Price...Make an offer $$$. Contact Geoff Gracie [email protected].

(Posted 19th May 2014) 

 

(QLD, Brendale) Roland VP540i

with take-up device in excellent condition. Print heads are in excellent condition and the machine itself is as new. $13500 + gst. 1300 423 826 ask for Paul Tel: 1300 423 826

(Posted 13th May 2014)


 

(QLD, Gold Coast) DGI VT111-98DF Solvent Printer

,  - 2.5m Wide, - 4 Colour, - 8 Heads, - In working order, - MAKE AN OFFER. Tel: 07 5576 8124

(Posted 5th May 2014)


 

(QLD, Brisbane) Equipment for Relocation to ANYWHERE.

Fully integrated computerised print shop. Roland SP-540i, Wide Format Trim Table, Xerox Apeosport C6550I plus , Ideal 4850-95 laser digital Guillotine, Ideal Manual Guillotine, RISO RP3700, Brother MFC-J6510DWA3 fax/copier, assorted print stock. All excellent working condition. Package $28k. Ph 0419 419 439

(Posted 22nd April 2014)


 

(QLD, Brisbane) 4 Laminating Roll Film

made by Gold Sovereign for $40 each, these are all new. Tel: 0421117715

(Posted 20th April 2014)


 

(QLD, Redcliffe)Tajima Embroidery Machine

(Industrial) for Sale- Single Head. 2005 Model- Single Head, 15 Needles TFMX-C1501  Frames included  $8,000 Tel: 0435 768 579

(Posted 18th April 2014)


 

(QLD, Brisbane) Used IDEAL WERK 7460 guillotine

for $1999 negotiable, in excellent condition Tel: 0421117715

(Posted 18th April 2014)

 
(QLD, Redcliffe)Tajima Embroidery Machine (Industrial)
for Sale- Single Head

2005 Model- Single Head, 15 Needles TFMX-C1501  Frames included  $8,000

0435 768 579

(Posted 18th April 2014)


 

(QLD, Brisbane) Used IDEAL WERK 7460 guillotine for $1999 negotiable, in excellent condition

0421117715

(Posted 18th April 2014)


 

(QLD, Brisbane) New AR-C16T1 toner for sale, for $85 negotiable.

0421117715

(Posted 18th April 2014


 

(QLD, Brisbane) Roland SP-540i for sale at $13,000 negotiable, in excellent condition.

0421117715

(Posted 18th April 2014)


 

(QLD, Oxenford) Roland SP-540v VersaCamm printer cutter. Just serviced, new printer heads.

Running perfectly. $9,000. Ph: 0409 284 295

(Posted 15th April 2014)

 

(QLD, Brisbane) Stock for your own picture framing business, moulding, machinery, glass, matt board, art prints ect. Worth $700,000 will accept $60,000 ono. Ph Bryan 0488632340

(Posted 2nd April 2014) 

  

(QLD, Gold Coast) MIMAKI JVC160 SP SOLVENT PRINTER 1600MM WIDE PRINT

Bulk Ink Take Up roll incl. printer software computer and dongle excellent print or spare parts $5000 READY FOR IMMEDIATE PRINTING SIGNS AND BANNERS. Recently serviced... Must pick up from us on Gold Coast.

07 5539 6767

(Posted 1st April 2014)


 

(QLD, Gold Coast) NEOLT VERTICAL FOAM 160 CUTTER,  SPARE BLADES INCLUDED. Cuts up to 10mm coreflute, Foamcore, Foamed PVC 1.2m x 2.4m MAKE LIFE EASIER !!

Tel:  07 5539 6767

(Posted 1st April 2014)


 

 Send an ad - click here 
Northern Territory

 

 

(NT, Alice Springs) Mimaki JV3

with some inks and Rasterlink software stand and take up roller machine is 8 years old still have boxes to freight $3000.00ono. can get it to Adelaide

0419587555

(Posted 26th June 2014)

South Australia

 

(SA, Mile End) Roland XC540 2xCMYKLmLc: $14,500+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(SA, Mile End) Roland XJ640 2xCMYKLmLc: $14,500+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(SA, Mile End) (Demo) Roland VS640 CMYKLmLcMtWh.

As new: $25,960 +gst. Includes take up: $2,495.00 and Ink: $870.00 and 2 yrs warranty.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(SA, Mile End) (Demo) Roland VS640 CMYKLmLcMtWh.

As new: $25,960+gst. Includes take up: $2495.00 and Ink: $870.00 and 2 yrs warranty.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(SA, Mile End) (Demo) Roland XR640 CMYKLmLcLk

and 4yrs Heads and All warranty. As new: $32,000+gst.

Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(S.A.,Adelaide) $5,500 Cannon ipf8300 Image Prograf

Wide Format Printer 44" Less the 3 years old, print heads recently replaced. Prints perfectly.The re-formulated 12-color LUCIA pigment ink system increases the achievable colour gamut by approximately 20% from the previous imagePROGRAF 12-colour series. A large 160GB hard drive, sub-ink tank system, Gigabit Ethernet support and Accounting Manager feature make this a premier solution for the fine art, photography and proofing markets.

Tel: 0413373046

(Posted 24th May 2014)

 

(SA, Adelaide CBD) Ideal 4850-95EP Programmable Guillotine,

good condition, comes with 2 blades and all accessories, manual in tact. $20K PLUS NEW, WILL SELL FOR ONLY $3,900

0411611668 

(Posted 29th April 2014)

Western Australia 

 

(WA, Canningvale) (Demo) Roland XR640 CMYKLmLcLk

and 4yrs Heads and All warranty. As new: $32,995+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(WA, Canningvale) (Demo) Roland Flat Bed LEJ640 CMYKWhCl:

$45,995+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(WA, Canningvale) (Demo) Roland VS640 CMYKLmLcMtWh

full 1yr Heads and All warranty. As new: $22300+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(WA, Canningvale) Roland XC540 2xCMYKLmLc:

$14,500+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(WA, Canningvale) (Demo) Roland XF640 -

2xCMYK and 5yrs Heads and All warranty. As new: $32,650+gst. Includes delivery, installation, training and ongoing support in metro areas. Please call Ernie on 0428 180 407 for a quote if outside of these areas, or for any enquiries.

(Posted 24th June 2014)

 

(WA,Busselton) CNC Flatbed Router. 2400 x 1200. Perske spindle, vacuum table. Comes with computer, monitor and Profile Lab 8 software. Surplus to requirement. $20k

0417 911 252

(Posted 7th June 2014)

 

(WA, Bayswater) Screenprinting work shop clearance Svecia Matic 1.2 x 1.5m print area excellent cond UV Dryer 3m x 2 m exposure unit wash troughs rack full of UV inks the lot for $10,000

08 9473 4488 or 0417 794 630

(Posted 16th April 2014)

  

Send an ad - click here 
Employment
Want to run an ad in this section? Just click here for your free ad.
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to [email protected]
________________________________________________________________________

 New South Wales  

  

 

(NSW, Blacktown) Sign Maker/Installer required for successful and growing sign company. Experience in vinyl cut and digital print signs and vehicle wrapping/graphics essential

02 9676 4100

(Posted 27th June 2014) 

 

(NSW, Kirrawee) CENTRAL SIGNS Pty Ltd, KIRRAWEE

Job Description

Sales Support / Industrial Designer

We require person with knowledge of materials and fabrication processes to prepare workshop drawings for sign manufacture and installation.

Experience with graphics software essential. Corel Draw preferred.

Responsibilities

*    Prepare sign design drawings using tender pricing information when available and softwares, job sheets, instructions, and schedules in collaboration with Project Managers

*    Prepare detailed costing sheets and production schedules, including relevant material that require orders from suppliers and/or subcontractors

*    Generate artwork / layouts / sign designs and create artwork, ready to use in production

*    Investigate and report to the Project Managers and/or the Production Manager alternative materials or production methods that are economical and produce the same or higher quality outputs

*    Gather information from architectural and engineering drawings, tenders, archived data and related documentation that will assist in job sheets.

*    Uses design/drafting software to prepare sketches and technical drawings.

Qualifications Needed:

*    Tertiary training in science, engineering and architecture

*    Ability to read and understand technical drawings (sign industry would be an advantage)

*    Knowledge of industrial manufacturing processes - cutting, grinding, welding, engraving, folding etc.

*    Ability to present information clearly and concisely

*    Computer skills and ability to prepare and manipulate graphics

Apply:  [email protected]

(Posted 26th May 2014)

  

(NSW, Caringbah) Graphic Designer & Wide Format printing
We are a family owned Franchised Printing business in Caringbah Sydney south NSW. The business specialises in small- to medium print-runs for businesses in the Shire. Often our customers want us to design the artwork for the work to be printed. The business has the latest graphics design software as well as high quality print and finishing equipment. Our dedication to the business and our commitment to service excellence to our customers is translating into exceptional growth in sales. Our dream is to grow the business to be the Graphic Designers and Printers of choice in the area.
We are looking for a motivated, reliable and trustworthy person with extensive experience designing artwork for Digital and Wide Format printing. In addition the successful candidate will be responsible for operating our digital press, customer service, reception duties and general duties in the business. You must be a good organiser who can work independently, with minimal supervision. At times you will be the only person in the business whilst the owners / directors are attending to other business matters. This position is ideal for candidates looking for permanent part time or casual hours.
Previous Print Industry experience will be beneficial.

Please email your CV's to [email protected] or [email protected]

(Posted 16th April 2014)

 
(NSW, Sydney) Contractor wanted to wrap cars.
Must have experience! And enough photos to prove it. Lump sum or hourly rate, can be done after normal work hours or weekends, very flexible. Need ASAP
Tel: 0416227767 
(Posted 5th April 2014) 
 

Victoria

 

(VIC, East St Kilda) We seek a full time dedicated professional who is capable to manage the entire process of sign making; design, printing, vinyl cutting, production and installation. With an eye for perfection, a desire to be 100% correct every time.

Liaising with sales staff and clients is an integral part of the role and ensuring a timely completion essential. Dedication is crucial!

Key requirements include knowledge of design packages flexipro. versaworks, illustrator. Maintenance of Roland printer, vinyl plotter. Reliable and well organised with attention to detail. Ability to work under pressure and meet deadlines. A current manual driving licence. Proven track record.

If you fit the role apply now...great working atmosphere, great colleagues and clients in a small team environment.

Based in East St Kilda we provide a complete signage solution to a varied client base with over 70% repeat clientele. Design companies, retail, corporate and private.

Enquiries to [email protected]

(Posted 22nd July 2014)

 

(VIC, Oakleigh South) Seeking an experienced mac operator

with quality finished art skills for a busy large format digital printing company.

3 years industry experience required as a mac operator and have a thorough working knowledge of Adobe Creative Suite, Indesign, Illustrator & Photoshop. Attention to detail, thoroughness and an ability to consistently perform in a busy team environment are essential qualities for the successful candidate. A knowledge of the digital printing industry including colour management, RIP computers, Inkjet Printers and Plotters will be an advantage.

Please send applications to: [email protected]

(Posted 22nd July 2014)

 

(VIC, Melbourne) Sales Manager

Seeking experienced Sales Manager with knowledge of wide-format inkjet printers and cutting plotters for textile and sign graphics markets in Australia.

Reporting directly to Senior Management, the key responsibilities of this role will be:

*    Identification of product distribution channels

*    Establishing product distribution opportunities by exploring relationships with resellers, distributors and dealers, negotiating contracts

*    Monitoring results through performance and inventory reporting

*    Communicating service expectations to channel partners

*    Meeting financial objectives including forecasting requirements, budgets, scheduling expenditure

*    Increasing sales by disseminating product information through trade show, cross selling and maintaining product image across channels

*    Supervising staff

The successful candidate will have previous experience as a Sales Manager within the flatbed and wide format digital inkjets market as well as roll and flat bed cutters. Previous experience in developing distributions channels within the Australian region is preferred. You will have strong presentation skills and business development and servicing skills with reseller and distribution channels. If you are interested in hearing more about this role, please send your details to [email protected]. Please note only applicants

shortlisted for this role will be contacted. Your application will be treated with strict confidentiality.

(Posted 2nd July 2014)

 

(VIC, Carrum Downs) WANTED: Highly motivated person within the signage industry looking for a new challenge. We are looking to chat with passionate, highly skilled individuals keen to be part of the "A-Team" @ LF Sign Group.

61397082025

(Posted 25th June 2014)

 

(VIC, Blackburn)Signwriter/Installer

This position requires experience and the ability to work out on location completing Shop fit outs, car wraps, boat wraps and more. We manufacture the majority of our work in house. Your vast experience in one or more of these areas would be greatly utilized.

The Scope of this position includes:

Signage fit outs internal and external

Interstate travel

Sporting events

Vehicle wraps

Boat wraps

Production / manufacturing

The Person:

To be successful in this role you will have

Trade experience

Sound industry knowledge

Motivated and work unsupervised

Read and work off Montages and Drawings

Work within Safe work methods at all times

Must have a drivers license

Please forward your resume to [email protected]

(Posted 23rd June 2014)

 

(VIC, Melbourne) An opportunity exists for a motivated and versatile Large Format Print Finisher, responsible for producing high quality finished display work, from a large range of printed substrates

Duties inc:

*Operation of 1600mm SEAL Laminator,

*Konsberg cutting table / finishing                               

*Other manual finish duties inc trimming and edging etc as required.

*Timber work including cutting finishing and assembling.

This is a full time position, with overtime available.

Experience with "Large Format" display work is essential, and the successful applicant will demonstrate a strong work history in a similar environment.

Here is an opportunity to join a well established, progressive company, and advance your career as part of a professional team in a friendly environment.

Email [email protected] for further details

(Posted 16th June 2014)

 

(VIC, Richmond) WANTED: Sign Maker / Install / Digital Printing.

START A.S.A.P.... The successful applicant will have good customer service experience, great time management skills, good organisational skills, a positive attitude and an ability to work unsupervised Tel: 03 9429 6140

(Posted 14th May 2014)

 

Queensland

  

(QLD, Gold Coast) Prepress Operator - Gold Coast Large Format Printer

An experienced prepress operator with comprehensive knowledge of the latest graphics programs is required for a busy digital and screen printing business. The successful candidate will work as part of a small, flexible team and must be capable of preparing, managing and ripping files for printing on a range of print equipment.  Operation and servicing of the equipment is also required. The position reports to the Manager and requires dedication to professionalism and liaison with clients. Some design and web knowledge, plus the ability to maintain a server and network would be an advantage. Remuneration will be based on individual experience and expertise.

Please forward resumes to [email protected]

(Posted 28th July 2014)

 

(QLD, Noosa) Wanted skilled Sign Assembly & Installer. Needed someone to give a hand with sign quotes and Installation. Good leads from long established business.

07 54497933

(Posted 4th July 2014)

 
(QLD, Brisbane)  Service Technician

Seeking experienced Service Technician in Brisbane with experience of wide-format inkjet printers and cutting plotters for textile and sign graphics

 

Key responsibilities of this role will be:
*    Provide high level technical on-site support. Resolve issues related to software, hardware and configuration
*    Effectively communicate and obtain the appropriate data needed to resolve the service call

*    Interface with other engineers to resolve customer issues
*    Provide a technical leadership role while working with customers and dealers
*    Use complex tools and excellent troubleshooting skills to identify, analyse and resolve technical issues
*    Maintain customer issue data in a call tracking database
*    Understand and explain related technical issues through product knowledge and reported issues
*    Participate in conference calls, as necessary, to resolve customer issues
*    Respond to urgent after hours customer calls, as necessary
*    Recall or relate known or prior issues/status/fixes to newly reported issues
*    Accomplish department and organization mission by completing related results as needed
The successful candidate must have previous experience servicing wide-format inkjet printers and cutting plotters market.  You will have ability to work independently as well as part of a team, flexibility, strong aptitude for customer applications, excellent customer service skills and good communication skill. Base salary + car allowance.
Please forward your resume to [email protected].  Please note only applicants shortlisted for this role will be contacted.
(Posted 2nd July 2014)

 

(QLD, Rothwell) Signwriter Brisbane Northside

THE SIGN CELLAR - ROTHWELL

We are a sign, clothing and print media business in the Northern Brisbane area.

Due to increased business we are seeking a reliable person with Trade Qualifications or experience in the sign trade.

They will be experienced and competent in sign assembly including vinyl and printed media applications and minor installations and able to pay attention to details.

They should also have computer design skills to create and edit art as required.

Other experience and skills will benefit the applicant and further training is available.

A current drivers license is essential.

Wage will be depending on competency and will be discussed at interview stage.

Applications are confidential and should be emailed to [email protected]

This full time position has a probationary period of one month

(Posted 25th June 2014)

 

Wanted (QLD, IPSWICH/BRISBANE area.) I am looking for a financial backer or a offer of full-time employment.
My skills are OFFSET, DIGITAL & WIDE FORMAT. ESTIMATING ETC. 
[email protected] 
(Posted 21st May 2014)
 

 

(QLD, Coopers Plain) Signwriter/vinyl person required Immediate start for right person Experienced in all aspects of the sign industry. Manufacture, design, print, vinyl, installation etc. Phone Sandy 33444333  [email protected]
(Posted 5th May 2014)
 


South Australia

 

(SA, Salisbury) )APPRENTICE SIGNMAKER

Haynes Signs are seeking a young enthusiastic person of excellent character to compliment our team. The successful applicant requires: Initiative / Solid Work Ethic / Good Communication Skills / Work Overtime / Drivers License

Expressions of interest to: [email protected]

(Posted 16th June 2014)

 

(SA, Salisbury) QUALIFIED SIGNMAKER / INSTALLER

Haynes Signs are seeking an enthusiastic person of excellent character to compliment our team. The successful applicant must be experienced in: All Signage Aspects / Digital Print / Installations / Vehicle Wrapping. Expressions of interest to: [email protected]

(Posted 16th June 2014)  

 

See all the positions vacant/wanted at Wide Format Online magazine

click here 

                 -------------------------------------------------------------------------------------------------------
Businesses for sale/wanted
Want to run an ad in this section? Just click here for your free ad
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to [email protected]
__________________________________________________________________

 

(VIC, Murrumbeena ) Business for sale established 1984,

or sell 49%,company has CNC,1.5m printer,2 x cutters long term customers. Tel: 0407560994

(Posted 2nd June 2014)

 

Send an ad - click here

 


TAFE News

TAFE NSW, Ultimo Face Book page -  Click here  
TAFE NSW - enrolments are now underway, Click here for more details.
TAFE NSW -  enews

  

Gold Coast - Apprenticeworks
Brisbane's Southbank Institute of Technology Apprentice Workshop Dates for 2013 - click here
Toilets You Can Trust Every time - so funny
Toilets You Can Trust Every time - so funny

Weekly Smile


 

Mother's Driver's License Wife's nick-name

I was listening to the radio this morning when the Host invited callers to reveal the nick-names they had for their wives.

The best call was from a brave chap who called his wife, "Harvey Norman"

The Host asked him why that name?

He replied: "Absolutely no interest for 36 months."
 

 

Quick Links
Useful Directory Links

If you or your products are not listed in the appropriate director, click the link at the top for the application form for a free listing.
Workshops:



  



 
Celmac ad

Spandex sponsor ad

Check out our videos on
You can find all our newsletters on Twitter and Facebook.
Follow us on Twitter
Follow us on

Wide Format Online magazine| PO Box 793, Aspley, QLD 4034| 0422 667 385| [email protected]| www.wideformatonline.com
Copyright © 2012. All Rights Reserved.