Surveys/Classified ads and more
10th March 2014
 
This week's survey

(These survey questions are sent in by our readers. Please spend a minute to give your answer to this week's survey as one or possibly more of your industry peers thinks this question is important and wishes to see your point of view as well as others in the industry.)


Plasimage banner

Last week's survey results...

 

Will be moving to new premises and was wondering if anyone had any bright or innovative ideas that I should consider (vinyl storage, bench surfaces, drying area, work-flow or the like?

 
  • We use a metal framework hinged to the wall where we can use magnets to hold vinyl up to gas off and harden, it works well as each bar in the frame swing out individually, allows easy access to each print. (Jonzone Creations, John Steedman) 

  • Make sure you have space for next years new technology. I built a purpose built workshop and as each new and larger piece of technology has come on line there is now no more room.

  • You can never have too much bench space. I work with a young tradesman & another apprentice & struggle to find a clean space for myself to work on! Keep your fabrication/manufacturing area separate from vinyl/paints & remember that it all flows down hill! (kyogle Signworks, Jamie)

  • If you have a large flatbed printer, make sure you have plenty of space for unprinted media and then printed media as well as moving it in and out.

  •  

Please spend a minute to give your answer to this week's survey as one or possibly more of your industry peers thinks this question is important and wishes to see your point of view as well as others in the industry.

 

If you have a subject that you would like us to survey, please send your subject to brian@wideformatonline.com. Thanks.) 

 

2nd Hand Machinery
Want to run an ad in this section? Just click here for your free ad.
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to brian@wideformatonline.com
________________________________________________________________

New South Wales

 

(NSW, West Ryde) HP25500 Latex Inks $120/catridge

(CMYKLcLm 2 sets)  Mob : 0432 345 989 

(Posted 7th March 2014)

 

(NSW, Silverwater) Roland Versa Studio BN20 

$7000 + gst neg. Great condition. New head. Email inq:

sales@positivecamtec.com.au 

(Posted 27th February 2014)

 

(NSW, Crows Nest) NEOLT 150 Trimmer. With Stand, with Take up reel, with catcher.
As new condition. Not a scratch. Cost over $1700. Sell $1000
0418120065
(Posted 11th February 2014)

 

(NSW, Dover Heights) HP9000s Solvent wide format. Lots of Ink,  Been in storage, should be working once run up, but I have not tested.
Contact for more details, MAKE AN OFFER.
0418120065
(Posted 11th February 2014)

 

(NSW, LUGARNO) Canon ipf8300s NEAR NEW $5500
0410343727
(Posted 10th February 2014)

 

(NSW, Ingleburn) 1600 Sign Master Laminator hot/cold application suit new buyer .very little work $8,100 incl GST. Ph 029605 3000
(Posted 3rd February 2014)

 
(NSW, Tamworth) Mimaki CJV30-160
- print & cut machine in good working condition
Prints & cuts up to 1600mm wide
Using genuine Mimaki 440cc inks
Rasterlink RIP software included
$10,000 ono
Contact Craig - 0428 924 625 or craig@countrywideonline.com.au
(Posted 29th January 2014)

 

(NSW, Coffs Harbour) Roland Hi-Fi-Jet CJ500 for sale. Circa 2000 model. Always covered. Offers Invited (Coffs Harbour)
0412618145
(Posted 3rd January 2014)

 

Wanted (NSW, Liverpool) Wanted EZY Taper 1530. Tel: 0420969089
(Posted 19th December 2013) 

 

(NSW, Tamworth) 2 x Mimaki JV3 160 SP $4000 ea. Extras include 2x spare pumps & (10x wipers all genuine) for each printer. Serviced regularly, selling due to upgrade. Contact Emily 0403 748 922
or (02) 6765 4511
(Posted 14th December 2013)

 

(NSW, Wyong) ROLAND AJ-1000 ONLY 210 PRINT HOURS serviced regularly. Print speeds of up to 90 sq m/hr $35,000
 0243533036
(Posted 25th November 2013)

 
(NSW, Blaxland) Roland Camm 1 cx500 Great cond with flexisign $2500
Duplo folding machine a4/a3 hardly used $2000
Shrink wrap machine 3 months old as new save $1500 only $2500
Emseal laminator 1650 with heated roller very good cond payed 13k $5000
Pick up Blaxland 10 min past penrith turn off m4
Inspection welcome please call Tony 0412 743 929
(Posted 14th November 2013) 
 
(NSW, Central Coast) SOLVENT HEAD FLUSH 1LTR BOTTLES $45 EACH PLUS POSTAGE  
0478830106 
(Posted 12th November 2013)
 
(NSW, Central Coast) Banner  440gsm 1600mm x 50mtrs white gloss. new unopened $220
0478830106
(Posted 12th November 2013)
 
(NSW, Central Coast) PERFORATED WINDOW STICKER PRINTABLE 1500MM X 50MTRS AND 1370 X 50MTRS FROM $350 NEW IN BOX
0478830106
(Posted 12th November 2013) 
 
(NSW, Central Coast) NEW BULK INK SYSTEM ALL HOSES LEADS EVERYTHING SUPPLIED SAVE HUNDREDS SUITE MIMAKI ROLAND MUTOH nsw central coast 10 AVAILABLE BUY DIRECT AND SAVE $150 + POSTAGE
0478830106
(Posted 12th November 2013)

ACT
 
(ACT, Queanbeyen) Mimaki JV5-160 HS Solvent Printer Good Condition $10,000
Mimaki UJV-160 LED UV Printer Good Condition $10,000
Mimaki JV4-160 Kiwa Dyesub Bulk Ink Good Condition $3,000
Call Rick 0407 978473 rick@screenmakers.com.auT
(Posted 3rd February 2014)
Victoria

 

(VIC, Campbellfield) Canon W8400 Inkjet. Need a new head / good for parts,otherwise all in working order. asking for $900 & pick up. Can supply Onxy 7 Rip for extra $250
0433383200
(Posted 20th February 2014)

 

(VIC, Melbourne) For sale Cardboard cutting machine KL-1300 . ask for 1000$. Tel: 0402164094
(Posted 18th February 2014)

 

(VIC, Wodonga) Roland Xj640 PROII Soljet (Print Only) Large Format Digital Printer
Prints 1600mm (64") wide, 6 colour complete with take up (heater/dryer) unit, prints upto 41.8 Sq. m/hr, manufacturers warranty until April 2017, only ever used genuine Eco Solmax inks, full service history by authorised Roland Technicians , Versa Works Software.
Price $16500.00 Neg. (Would suit new buyer)
Can help with packaging, freight at buyers expense.
Tel: 0260566060
(Posted 17th February 2014)

 

(VIC, Melbourne) A3 Flatbed Epson T-shirt printer for sale. Good condition. ask for 1400$
0402164094
(Posted 14th February 2014)

 

(VIC, Kilsyth) Roland XJ-640 Printer, 1625mm width, 6 Colour, $9900 call Michael 0407 865 909.
(Posted 10th February 2014)

 

(VIC, Brunswick) Roland VersaCamm VS640 (Print & Cut)

Purchased Brand New in Aug 2013. Hardly been used. Selling due to business closure. Comes with take up reel, dual CMYK ink configuration, VersaWorks rip software. This is an absolute awesome machine in Excellent condition. Can be viewed working. Pictures can be provided upon request. Looking for a quick sale. $21K neg. Tel: 0411 672110 

(Posted 29th January 2014)


(VIC, Mt Waverly) 2012 Roland 54" LEC-540

CMYK+White+Gloss. 4 Colour print, Spot white, spot varnish, spot gloss/matte, emboss and texture print , contour cuts, perf-cuts. print and cut Take up machine. Under warranty (almost 2 years remaining). Serviced by Roland technicians. 

Selling to upgrade to a larger machine. $42,500 plus GST Pick up from Mt
Waverley, Victoria. Call 0421794969 

(Posted 23rd January 2014)

  

(VIC, Murrumbeena) 

Roland CAMM-1 plotter 

1220mm $1000.00

Tel: 03 95638266 or 0407 560 994 

(Posted 15th January 2014)


(VIC, Melbourne) For Sale - Roland Pump 6700319010
x 10 off. Brand new.  $65.00 each  Ex Melbourne
Email: signanddisplay@spicers.com.au  
(Posted 10th December 2013)





(VIC, Melbourne) For Sale - Roland Pump 7576340000
x 6 off. Brand new.  $50.00 each  Ex Melbourne
Email: signanddisplay@spicers.com.au
(Posted 10th December 2013)





(VIC, Woodend) EMSEAL applicator 4R plus laminator.
laminates up to 1420 wide and 13mm thick substrates. Good working order, could use a little bit of a tune. Selling due to surplus to requirements. $1600. Mick - 0405 504 644
(Posted 4th December 2013)

(VIC, Sunshine West) 2010 Inca Spyder V
(4 Colour & White) digital flatbed Printer and accessories. Comes with recently installed brand new heads (12/7/13) with spares, rip hardware package and colourgate production server. Serviced by Fujifilm Australia every three months. Selling due to upgrade. Asking $70,000.00+GST Tel: 03 9311 9755
(Posted 28th November 2013)

 

(VIC, Mount Waverley) 2009 Roland XC 540  6 colour, solvent , print and cut, with up take.
C,M,Y, Lm, Lc, heads perfect condition,  K head has distorted nozzles and prints with banding at low resolutions.
Price - $11,500.00
0421794969
(Posted 27th November 2013)


(VIC, Moonee Ponds) THE ROLLS ROYCE OF FINISHING MACHINES. Sallmetall (1600TTL), Electric laminator/mounter. Sallmetall 3200mm electric board trimmer. Both in excellent condition and maintained by Celmac.Call Fred 0428 173 277
(Posted 26th November 2013)

 

(VIC, Port Melbourne) Neoflex DTG Printer and Viper Pretreatment Machine (Viper is the full featured Viper), 2 years old and rarely used. Great condition, well maintained. Paid $43,000 new, Sell $22,000 comes with 6 platens; prints white and dark colour shirts, excellent quality prints, hardly used so no need for the machine. Call Mark 0412 341 108
(Posted 20th November 2013)

 

(VIC, Caroline Springs) Digital Media Synthetic Paper 

UV-Curable, Dye & Pigment, Aqueous, S/Side coating, Indoor.

Available Sizes: 914/1270/1520mm(W) x 30.5m-3"core Rolls

Thickness: 210micr. Price $ 2.37 m2

Thickness: 175micr. Price $ 2.18 m2

Digital Media Synthetic Paper UV-Curable, Eco-Sol, Latex, S/Side coating, Outdoor.

Available Sizes: 914/1270/1520mm(W) x 30.5m-3"core Rolls

Thickness: 210micr. Price $ 2.49 m2

Thickness: 175micr. Price $ 2.37 m2

Squeegee Rubber for Screen Printing 3 layers,
Size: 3000 and 2450 x 60 x 9.5mm
Hardness: 75/85/75 
Price: $ 0.42 P/cm MOQ 1 roll
Price not incl. GST and delivery
Digital Media Synthetic Paper UV-Curable, Dye & Pigment, Aqueous, S/Side coating, Indoor.
Available Sizes: 914/1270/1520mm(W) x 30.5m-3"core Rolls
Thickness: 210micr. Price $ 2.37 m2
Thickness: 175micr. Price $ 2.18 m2
Hook and Loop (not Velcro Brand) with permanent adhesive
Available Pairs Only, Sizes: 20/25/30mm(W) x 25m length Price: $ 20.70 / 22.78 / 24.89 P/Pair.
Keder Rope for Banner edging perfect weldable or sewing.
Size 7.5/8/20mm S/Tongue
Price: 0.89c P/m  
Available: 200m Rolls Only
Above Prices NOT incl. GST and delivery costs.
Please send request for more details - quote: info@sigmatec.com.au. or contact: Jarek, M:0405 151 529
(Posted 6th November 2013).

Send an ad - click here
Queensland
 

(QLD, Brisbane) Roland VP540 Wide Format Print/Cut. All in excellent condition. Comes with takeup device and VersaWorks PIP. phone Paul on 1300 423 826.
(Posted 7th March 2014)

 

(QLD, Brisbane) Roland SP300v Wide Format Printer. Print Width is 760mm.
4 Colour CMYK - 2 BRAND NEW printheads.
Price includes VersaWorks RIP.
Price includes 1 set of inks.
This Roland SP300v is in excellent condition.
We can deliver door to door if required.
Price $6,500. Phone Paul 0408 474 860
(Posted 7th March 2014)

  

(QLD, Noosa) Roland VP540i print & cut. Fully serviced by Sign Essential 6 mths warranty remaining.
$7000 0421 772 858
(Posted 5th March 2014)

 

(QLD, Brisbane) Multicam Model M-1 CNC Routing machine 1200 x 1000 routing area, Elte 2.2kw high frequency routing spindle, Enroute CAM module software and Window 7 computer, Trico Mist sprayer, Custom made vacuum table with Busch pump. Hafco dust / chip extractor plus assorted tooling. Purchased 2010 and had little use. $20,000 to a good home. 07 3299 3877
(Posted 3rd March 2014)

 

(QLD, Maroochydore) 3 Roland Solvent Printers with Bulk Ink.  XJ-640 - 2 of
XJ-740 - 1 of
Seen heavy commercial use, but still in good working condition.
Sunshine Coast QLD - View operating.
Tel: 0412 855 929
(Posted 3rd March 2014)

 

(QLD, Gold Coast)  Summa T series  s1600 Tangential knife vinyl cutter  $5000 Tel: 0407 493 365
(Posted 3rd March 2014) 

 

Wanted (QLD, Brisbane) Wanted - I want a Roland, HP or Mimaki solvent\latex printer
as a trade in on new printer.
Up to $500 for working or non working printer of the above type. Need asap.
07-3162 1451
(Posted 26th February 2014)  

  

(QLD, Gold Coast) Sign Making and Cutting Table on wheels. 1830mm x 1520mm x 920mm (h), 4 x plastic casters. $690+gst. Call 07 55632284
(Posted 25th February 2014)

 

(QLD, Brisbane) DRILL  ........    LIHIT LAB  30mm depth approx paper 80gsm with lock down clamp and spare drill bits including standard 2,3,4 hole and more. $650 ono.
(Posted 23rd February 2014)

 

(QLD, Gold Coast)Ex Demo Epson Dye-sublimation printer (17 inches wide), 3 rolls of media, 4L of ink, software. For doing apparel, stubby coolers, bar runners, mugs, cups etc. Mark 0404689825 $4500+gst Demos welcome.

(Posted 21st February 2014)

 

(QLD, Lawnton) Equipment for sale (sold separately) - Roland XP540MT (12 months warranty - done little work), Ezytaper laminator, sign tables, drying racks, cutting tables on wheels. Call us for pricing and details on 07 32851602 or email us at info@benjac.com.au

All equipment purchase removal is at purchasers cost.
(Posted 17th February 2014).

  

(QLD, Underwood) Agfa flatbed printer. $2000.00  07 3208 6744
(Posted 5th February 2014)

 

(QLD, Yatala) HP L25500 Latex Printer 60". Bought new Dec 2011.
Used only to print motocross decals for a small home business so has had very low use compared to larger companies. Looks and runs like new.
Excellent Condition. $13000. Contact Alex. 0404 838 301
(Posted 4th February 2014)

 

(QLD, Brisbane) Roland VP540I Print and Cut 1370mm wide. Perfect working order suit new buyer. Complete with media take up. Fully serviced buy Sign Essentials Brisbane. Package with cold laminator $10,500.00. Phone: 0417 601 935 for more details.
(Posted 4th February 2014)

 

(QLD, Hervey Bay) UV Flatbed Digital Printer. 2008, Flora Printer F1-180UV PLUS 2006 LJ II1800-UV flatbed printer (used for parts). Save a fortune by printing directly onto substrates. Printable surface area is 1.8m wide by any length of media with max thickness 48mm. At a comparable price of $135,000 new, this is a bargain buy at only $23,000. Flaar Report available. Contact Darryl 0418797544.
(Posted 3rd February 2014)

 

(QLD, Brisbane) Agfa Anapurna M. UV Hybrid, Flatbed and Roll Feed Machine. CMYK LtC LtM, prints 720 and 1440 dpi. Professionally profiled using Lyson Ink. Has front and rear trolleys for rigid substrate printing. Runs Wasatch. $20,000 call Phil 0412 787 496.
(Posted 2nd February 2014)

 
(QLD, Brisbane) Environ Air E300.  Air Purifier. Excellent condition. Comes with a new filter ($200 new) Original filter only used. (Unit is approx. $2500 new) Pickup Only. $900 + GST. Contact Phil on 0412 787 496 for more details.
(Posted 18th January 2014)
 
(QLD, Yatala) Mimaki plotter.  It's an 8 month old, extremely little use Mimaki CG130-FX with max cutting width 1300mm.
0404 838 301
(Posted 9th January 2014) 
 
(QLD, Brisbane) Signblazer Hotshot. Original USB dongle, disk and manuals. Program and Versaworks Password. Patch disk included for Windows XP, Vista, W7 & W8 32/64 bit. Patch disk available separately. Mike 0418151829
(Posted 17th December 2013)

(QLD, Redcliffe) Roland SP540V Printer/Cutter with take up roller. 54 inch - 1370mm wide printing and contour cutting. Includes take-up spool and stand. For more information please ring 0738853355. $10,000 inc. GST
(Posted 14th December 2013)

 
(QLD, Sheldon) Seiko HP Triangle inksCYAN LT CYAN MAGENTA BLACK - 80% approx and New LIGHT MAGENTA 100% - removed from running machine that has been upgraded to bulk system. $500 ono call Jason
0412 179 962 QLD
Posted 12th December 2013)
 

(QLD, Brisbane southside) I HAVE EXCESS SHEETS OF A-GRADE WHITE ALUMIN. COMPOSITE  

2MM @ $39 PER SHEET,
3MM @ $49 PER SHEET.
CALL STEVE (07) 3390 3796  OR  0432 452 081 BULK DISCOUNTS ALSO.
(Posted 7th December 2013) 

 
(QLD, Gold Coast) - Mutoh ValueJet 1204 complete sign setup Great Condition inc. printer, software, $1500 of ink, some media. $4995+Gst perfect for anyone call 55632284
(Posted 29th November 2013)

 

(QLD, Gold Coast) ,DGI VT111-98DF Solvent Printer.

- 2.5m Wide. - 4 Colour, - 8 Heads. - In working order, - MAKE AN OFFER. Tel:07 5576 8124. sales@bremnervisual.com.au

(Posted 25th November 2013)

 

(Wanted) (QLD,  Brendale) Wanted Roland Printers for spare parts.

Contact Paul 1300 423 826

(Posted 15th November 2013)

 
(QLD, Blackstone) Roland VersaCamm VS-640 Printer with take-up roller + Royal Sovereign heat assist Laminator with take-up roller. Items were purchased new December 2010 and has a full service history with very little use. $21,000 Please call 0423 552 032 or email pact2@bigpond.com  Equipment relocated at buyers expense
(Posted 6th November 2013) 
 Send an ad - click here 
South Australia

 

(SA, Mansfield Park) panel saw/table saw, buyer to remove , working condition, 3phase.

$800 Ono
Phone: 0401425769
(Posted 6th March 2014)

 

(SA, Reynella East) jv3 needs new head

$2700, bulk ink system (sa) Tel: 0401425769

(Posted 30th January 2014)

Western Australia

Wanted (WA, Bayswater) Vinyl Slitter, 

at least 1380 wide. Working condition. WA (must be able to ship if in another state). 

Contact Martin 0431 485 575

(Posted 18th December 2014)

  

Send an ad - click here 
Employment
Want to run an ad in this section? Just click here for your free ad.
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to brian@wideformatonline.com
________________________________________________________________________

 New South Wales

 

(NSW, Western Sydney) Service Technician

An opportunity for an experienced support technician  with experience in wide-format inkjet printers.

Key responsibilities in this role will be:

-Provide high level technical on-site support. Resolve issues related to software, hardware and configuration

-Effectively communicate and obtain the appropriate data needed to resolve the service call

-Interface with other engineers to resolve customer issues

-Provide a technical leadership role while working with customers and dealers

-Use complex tools and excellent troubleshooting skills to identify, analyse and resolve technical issues

-Maintain customer issue data in a call tracking database

-Understand and explain related technical issues through product knowledge and reported issues

-Participate in conference calls, as necessary, to resolve customer issues

-Respond to urgent after hours customer calls, as necessary

-Recall or relate known or prior issues/status/fixes to newly reported issues

-Accomplish department and organization mission by completing related results as needed

Previous experience servicing within the wide format digital Inkjets market is an advantage.  You will have ability to work independently as well as part of a team, flexibility, strong aptitude for customer applications, excellent customer service skills and good communication skill. Prefer a degree in Electrical or Mechanical Engineering or Computer Science with 2-3 years of related work experience. Photoshop and Illustrator experience preferred. Base salary + car allowance.

Please forwarding your resume to miki.ikari@advantageresourcing.com . Please note only applicants shortlisted for this role will be contacted.

(Posted 18th February 2014)

Victoria

 

(VIC) EXCELLENT CAREER OPPORTUNITY - RICKY RICHARDS (SALES) P/L 
Business Development Manager- Print Media Wide Format
*    Great Company Culture & team
*    Victorian Territory
At Ricky Richards, we have a fantastic opportunity for an experienced BDM to join our friendly team who are dedicated and passionate about the development and distribution of sign & digital print media consumables.
As an integral member of our team, you will be responsible for establishing and building on relationships with new and existing customers, identifying and developing new business opportunities, in addition to meeting sales objectives and territorial budgets.
To be successful in this role you will have:
*    Experience in selling  print media substrates to the Digital, Screen & Sign industry
*    A proven track record of working independently and remotely
*    Exceptional communication skills and unlimited  motivation
*    Excellent organisation skills and the ability to use a computerised client management system
*    Confidence to build rapport with customers both over the phone and in person
*    The ability to identify and follow through on new sales opportunities and generate sales accordingly
An attractive salary package commensurate with experience will be offered to the successful candidate.
If you have a strong desire to contribute to our long term growth plans, and believe this is the role you have been waiting for please contact Kristy Haynes on 0466 110 496 or email kristyh@rickyrichards.com.au . All enquiries will be treated in the strictest of confidence.
(Posted 26th February 2014)
 
(VIC, Carrum Downs) Sign Production/Digital Printing. Our team is looking for new junior member, that would like to make a career in large format digital printing. You will start from learning the art of sign and display assembly and will progress to operate of our UV printer, Kongsberg cutter and more. Knowledge of computer design is necessary, some heavy lifting is expected. We are Melbourne based in Carrum Downs, Tel 0409 183 176. David@brandprintaustralia.com.au
(Posted 9th November 2013)

 

Queensland

 

Wanted (QLD, Ipswich or Brisbane) (Work Wanted, part time-full time) 14 Years Experience with Epson Large Format Printers, 9500,7600, 9600,7880, 4900, and Expert in Photoshop. (used to lecture & Write article on it also) Ipswich/Brisbane. (07-38160341) Sandy
(Posted 6th March 2014)
 
Wanted (QLD, Brisbane & Gold Coast Region) "Work Wanted"
20 Y.O Male 6ft tall with over 2x years experience in the sign industry looking for a job in  Brisbane & Gold Coast Region. His previous Gold Coast employer just closed down. Ph: 04500-39938   
Own transport & Willing to drive anywhere. 
(Posted 19th February 2014)

 

(QLD,Townsville) Sales Executive - Sign & Display, Townsville, QLD
About this Position 
Manage and grow your own sales territory in our Sign & Display segment. Based at our Townsville site, you will create relationships with new customers, continue to manage our existing customers and drive awareness of our brand into the marketplace. On a daily basis you will liaise with customers and our internal sales team, generate sales, negotiate on pricing, suggest suitable or alternative products and ensure your customers are satisfied.  
Key Responsibilities 
-    Grow the Sign & Display business within Far North Queensland, with emphasis on the Townsville, Cairns and Mackay market; 
-    Assisting with the range stocking policy in the Townsville warehouse; 
-    Actively seek new business; 
-    Liaise with customers regarding new products, product deletions and price changes; 
-    Meet and exceed sales targets; and 
-    Create and deliver Value Propositions with tangible benefits to the business.   
Skills and Experience  
-    Previous experience in and knowledge of the Sign & Display and digital industry; 
-    Strong sales skills and ability to consistently meet and exceed sales targets; 
-    Resilience; 
-    Effective time management and negotiation skills; 
-    Effective communication and customer relations skills; 
-    Self-confident and a positive attitude; and 
-    Sound knowledge Microsoft Excel/Outlook.  
Remuneration and Benefits 
-    Training and career development opportunities 
-    Competitive base salary 
-    11% superannuation 
-    Vehicle allowance 
-    Lap top, phone, internet 
-    Work life balance 
-    Free on site car parking 
How to Apply 
Click on the Apply button or for further information contact Nicole on 03 9765 0810. 
(Posted 23rd January 2014)

 

Wanted (QLD, Brisbane) Work wanted -

Work wanted Cnc flatbed router operator/programmer 30 years experience in signage with 20 on routers and general signage manufacture, spray painting, infilling, wiring and fabrication of light boxes, acrylic fabrication etc. Experience on different routers and software utilizing plastics and laminates through to timbers, brass, aluminium and stainless steel. Blue card, boom elevated work platform and forklift tickets. mark93@iprimus.com.au   0488919523  Brisbane and surrounds.
(Posted 13th December 2013)

 

South Australia

 

(SA, Adelaide) WIDE FORMAT ROLL & FLATBED DIGITAL OPERATOR (Pre-Press) Duties include, Pre-Press, colour correction/matching, preparation of files, design work, ripping and printing to  multiple devices. You must be able to work in a busy environment with tight deadlines.  Wage negotiable based on experience. Resumes to: martin@pricescreen.com.au
(Posted 13th January 2014)

 

See all the positions vacant/wanted at Wide Format Online magazine

click here 

                 -------------------------------------------------------------------------------------------------------
Businesses for sale/wanted
Want to run an ad in this section? Just click here for your free ad
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to brian@wideformatonline.com
__________________________________________________________________

 

(QLD, Burleigh Heads) (Sign & Print) Factory has Accomodation.

Est. 1957 Owned 30years. Regular clients, Printers x 2, Cutter, Laminator, Racks, Ute, Cherry Picker, Tools. Rent $450 + GST
Price $185k 0412 040 041
(Posted 3rd March 2014)

 

(Sydney or Melbourne) We are an international company establishing a branch in Australia.

Now looking for a partner, able to print few metres wall murals in thousands per month, using HP latex. Preferably, send it then to our Customers (pack in a branded tube, print address label, collect for the courier). The printing comp should be in Sydney or Melbourne. Call 0414 611 669

(Posted 6th February 2014)

 

(QLD, Bundaberg) UNIQUE SIGN BUSINESS & LIFESTYLE OPPORTUNITY
WITH OFFICES, WORKSHOP, RESIDENCE. 

OWNERS RETIRING, ESTABLISHED 38 YEARS WITH ORIGINAL OWNER

SEE ALL DETAILS AT www.bsale.com.au  ID: 14772 

(Posted 20th January 2014)

 

(WA, Esperance) Established 40 years,

Large premises, All plant & equipment, Owner Retiring. 0890713565

topsigns@westnet.com.au 

(Posted 18th November 2013)

 

(QLD, Yeppoon) Complete Sign Business  

Well established - prime position - huge client base - little opposition

All equipment & files. Details 0409 581 135 

(Posted 3rd November 2013)

 

Send an ad - click here

 

See all the businesses for sale/wanted at Wide Format Online magazine

click here 

 

-----------------------------------------------------------------------------------------------------------------
TAFE News

TAFE NSW, Ultimo Face Book page -  Click here  
TAFE NSW - enrolments are now underway, Click here for more details.
TAFE NSW -  click here 
TAFE NSW - January 2014 
TAFE enews - click here

  

Gold Coast - Apprenticeworks
Brisbane's Southbank Institute of Technology Apprentice Workshop Dates for 2013 - click here
Typhoon - a ride with the best: The Science Museum, London
Typhoon - a ride with the best: The Science Museum, London

Weekly Smile
   

An Afghanistan diplomat visiting the US for the first time was being wined and dined by the State Department.

The diplomat was not used to the salt in American foods (French fries, cheeses, salami, anchovies, etc.) and was constantly sending his manservant Abdul to fetch him a glass of water.

Time and again, Abdul would scamper off and return with a glass of water, but then came the time when he returned empty handed.

"Abdul, you son of an ugly camel, where is my water?" demanded the diplomat.

"A thousand pardons, O Illustrious One," stammered the wretched Abdul.

"But a man is sitting on the well!"

Quick Links
Useful Directory Links
Who's Who in Wide Format printing


If you or your products are not listed in the appropriate director, click the link at the top for the application form for a free listing.
Discussions/Questions:

plus many more...

Fujifilm logo

 
Celmac ad

Spandex sponsor ad



  
Sept 2013

Ricky Richards
You can find all our newsletters on Twitter, LinkedIn and Facebook.
Check out our videos on
Follow us on Twitter
Follow us on

Wide Format Online magazine| PO Box 793, Aspley, QLD 4034| 07 3863 2822| brian@wideformatonline.com| www.wideformatonline.com
Copyright © 2012. All Rights Reserved.