Surveys/Classified ads and more
Knifeless - conect
8th July 2013
Greetings!
This week's survey

(These survey questions are sent in by our readers. Please spend a minute to give your answer to this week's survey as one or possibly more of your industry peers thinks this question is important and wishes to see your point of view as well as others in the industry.)


Our email address [email protected] was out of order on Thursday and Friday, please accept our apologies for anybody trying to reach us on that address. The problem has now been fixed.
 
Last Week's Survey 

Do you create your own profiles for print media?
 
  • All our profiles have been specially produced on site by a company as they have all the proper equipment I have spent around $10,000 as we have quite a few profiles but it was money well spent. However in saying that really no one cares or notices unless a colour is well out its really only the people that create the artwork but in the end we know and care that its the best we can achieve.
  • Yes, I have to change settings for perfect colour. Each job is different.
  • We manufacture our own ink to suit our specialist printing into the anodic layer of anodized aluminium and are now using the seventh generation printer we have developed. With each upgrade of print head technology we need new colour profiles or tweeking of exisiting profiles. We always used Cielab Australia to make our profiles and recommend the process for any specialist operation. It is far too difficult with multiple areas to go very wrong without specialist knowledge. Tread very wearily to make your own profiles, much better to use an expert and get a great result plus we gain more knowledge on how to best manage colour in our printing operation.
    ( Metal Sign & Label Pty Ltd, Max Robbie)
  • No I haven't had sufficient support to do so. I would be very anxious to learn how, as I am running on default profiles at the moment. I lost my third party profiles when I reinstalled versawerx
    (Dusty Road Design & Print, Nicola)
  • No. If supplier cannot supply profile or if the machine manufacturer does not have a profile for that product we do not purchase.
  • Yes. I think there comes a point when you really need to learn about this. It wasn't so easy to grasp at first for me, but it was well worth it in the end. Saves ink, time, and gives significantly better quality. As part of the learning curve, you also get to learn a lot about colour management, as well as the more detailed aspects of your printer settings, all leading to better knowledge of your equipment. One big whinge I want to make to the industry suppliers though, is the lack of accessibility to this knowledge. If my rep had offered profile training at the time of my machine purchase for an additional amount, I would have saidYES! But no such thing existed. It needs to be common knowledge for all owners of production printers.
  • Not at present, but I would like to learn as many vinyl manufacturers don't produce profiles for our combination of printers & RIPs.
  • No, it is far easier to download the profiles from the supplier.  
------------------------------------------------------------------------------------------------------
Our survey questions are sent in by readers. If you have an idea for a future survey please send an email to [email protected]. Your suggestion may be on the minds of many others. 
 
Plasimage banner
2nd Hand Machinery
Advertise your 2nd Hand Machinery in the magazine with the most wide format printer readers (+/-40,000 per month) in our region and/or our newsletters with the largest and most focused database on wide format printing available in the ANZ region.
If you would like to run an ad in this section AND in Wide Format Online magazine just
click here 
for the application form.
Cost is @1.30 + GST per word
-------------------------------------------
For free ads only in Wide Format Online magazine, just
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to [email protected]
-------------------------------------------------------------------------------------------------------------------- 

  Scroll down for equipment nearest to you  


New South Wales


(NSW, Newcastle) Wanted: Manual or Electric/Mounting and Laminating Machine. Anything over 1400mm wide considered. Must be in good condition and local. Tel: 0431097877
(Posted 3rd July 2013)

(NSW, Sydney) Roland CJ500,
PRINT and CUT Machine up to 1,370mm wide.
Excellent working condition, Origional owner. Why continue outsourcing when you can purchase this economical, low maintenance machine. 6 colour, Origional Roland Pigment ink with stand and take up roll. Price $3,500 (ONO) + Bonus spare inks and a variety of substrait rolls included. Call Glen on  0418 271 742 .
(Posted 18th June 2013)
 
(NSW, Brookvale) Heat seeker textile dryer
3.0m x 1.2m variable speed & heat controls, $12,000 Carousel, 4 station Ergo Jig, $5,000 Flash curing unit, twin lamp, $2,500 Will split or take $15k the lot, with squeegees and inks and shelving included.=
Graham,  0418 609 698
(Posted 18th June 2013)

(NSW, Auburn) Seiko 64S
1.5m with software and Epson stylus pro 7500 with $3000 to $4000 of Inks for $3800. Located in Auburn NSW. Please call Jim on 0414454649.
(Posted 11th June 2013)

(NSW, Cardiff) WANTED - Printer 2500 mm wide
or larger for use as a banner printer with ECO Solvent inks. Any brand considered but Mimaki would be ideal as this is what we currently operate.
Tel: 02 49567496 
(Posted 7th June 2013)  

(NSW, Sydney) Chasing stand for HP Designjet 4000, preferably in the Sydney Metro area - Contact Bruce 02 9449 8717 

(Posted 3rd June 2013)   

(NSW. Erskinville) Digital Sublimation Print Software, Ergosoft TexPrint v.2008 Rip and print server for professional textile print production. Licensed to run two printers up to 1800 mm wide. New price $4500 sell price $2900. Tel: 02 95573900
(Posted 31st May 2013)

(NSW. North Richmond) Roland GX500 vinyl cutter in perfect working order and good condition. Asking $3500.00 ono. Phone 02 4571 1423
(Posted 27th May 2013)

(NSW, Silverwater) Svecia Semi Auto 1600 x 1200mm screen print machine. Includes 60" OZ-Cure UV Dryer. Very good working order. Will separate. $7000.00 for both. PH:  0412 188 630 .
(Posted 23rd May 2013)
 
(NSW, Silverwater) UV Dryer OZ-Cure 60" wide. Very good working order- $4000.00 PH:  0412 188 630
(Posted 23rd May 2013)
 
(NSW, Silverwater) M & R Saturn Semi Auto Screen Printer- 900 x 600mm format. Good working order- $1500. PH:  0412 188 630
(Posted 23rd May 2013)
 
(NSW, Carrington) POLAR 137x GUILLOTINE
A high-speed cutter employed for the accurate cutting of materials such as paper, card board,
chip board, plastic foils, etc. and handles sheet sizes with a diagonal of 137 cm/ 54 inches.
Pickup Only.  $ 105,000 +GST. Contact Peter on 0249202700 or [email protected].
(Posted 23rd May 2013)
 
(NSW, Carrington) ROLAND SOLJET PRO II V SJ-1045EX, 1220 to 2641 mm (48 to 104 in.)
4 colours (cyan, magenta, yellow, and black) or 6 colours (cyan, magenta, yellow, black, light cyan, and light magenta)
Maximum 1440 dpi, Pickup Only. $ 46,500+GST. Contact Peter on 0249202700 or [email protected].
(Posted 23rd May 2013)
 
(NSW, Carrington) ROLAND SOLJET PRO III XC-540MT.
Metallic Silver Eco-Sol MAX ink, the XC-540MT features six colours, CMYK+Metallic Silver+White (CMYK+Mt+W).
Printing/Cutting width   19.68 to 54 Inches/8.31 to 54 Inches.
Pickup Only.  $23,500+GST. Contact Peter on 0249202700 or [email protected].
(Posted 23rd May 2013)

(NSW, Wollongong) Demo clearance Sublimation heat press. Oil heated drum heat press 1700 wide working width with table. Twin shuttle heat press great for sports wear. 3 PHASE power needed on heat presses. Please call for pricing  Craig  0448 911 333
(Posted 14th May 2013)

(NSW, Kingsgrove) Wanted - used ESKO Kongsberg cutting table, all models considered.
Wanted - used PVC welder, KEDAR welder
Wanted - used pallet racking
We will consider from any state, call Glenn  0414 437 077
(Posted 9th May 2013)

(NSW, Wyong)  ROLAND AJ-1000 ONLY 210 PRINT HOURS serviced regularly. Print speeds of up to 90 sq m/hr $40,000. Tel: 0243533036
(Posted 23rd April 2013)

(NSW, Moorebank) Roland BN-20 (CMYK + Metallic) 20 inch Print & Cut Machine.
14 months old, hardly used in perfect condition.
Includes Transport, Installation, Full Training and Software. $7,000+GST. Contact Dan on 0448888128
(Posted 15th April 2013)
 
(NSW, Moorebank) Roland VS-640 (2 X CMYK) 64 Inch Print & Cut Machine with Take Up Unit and Optional Blower/Dryer Unit.
Just serviced and warranty until 2/06/2014.
Includes Transport, Installation, Full Training and Software. $20,500+GST. Contact Dan on 0448888128
(Posted 15th April 2013)
 
(NSW, Moorebank) Roland VS-640 (2 X CMYK) 64 Inch, Print & Cut Machine with Take Up Unit.
Just serviced and Warranty until 12/07/2014 Includes Transport, Instalation, Full Training and Software. $18,000+GST. Contact Dan on 0448888128
(Posted 15th April 2013)

(NSW. Wollongong) JV3-75SP Old stock but still  in the box comes with 8 x ES3 solvent ink and Photoprint software $4500.00
JV3-160 SP Old stock but still in the box comes with 8 x ES3 solvent inks and Photoprint software $7700.00
Please call Leigh (QLD)  0427 981 344  Craig (NSW)  0448 911 333
(Posted 9th April 2013)

(NSW, Brookvale) Mechwood Edge Bander, Model M5 Edgemaster,Semi Automatic. Pre Glued Machine, Up to 2mm PVC Edging, Pneumatic Cut Off,Top & Bottom Radius Trimming Cutters. Used but good condition
 0402 337 494
(POsted 25th March 2013)
 
(NSW,Brookvale) Rotory Paper trimmer designed to cut large and oversized papers including plan, signs, banners, papers, photos, and large digital printouts
Tel:  0402 337 494
(Posted 25th March 2013)
 
(NSW, Brookvale) KIP 3000 wide format Digital Copier/Printer/Scanner. Excellent condition recently serviced. Ideal for multiple application. NSW, Brookvale
Tel:  0402 337 494
(Posted 25th March 2013)

(NSW, Sydney) We have 2 printers onsite that we are looking to sell.
HP Laser Jet 5550dtn
HP Laser Jet 9050dn
Both printers are functioning and in good condition, we simple have an excess of
machines and require the spaces vacated.
We are open to offers for the purchase and pick up of both the machines above.
 02 9394 7712
(Posted 22nd March 2013)

ACT

(ACT, Canberra) INKS x 6: Canon BCI-1421PM (Photo Magenta), BCI-1421M (Magenta), BCI-1421Y (Yellow), BCI-1421PC (Photo Cyan), BCI-1421C (Cyan), BCI-1421BK (Black) Paid $292/each Sell for $150/each. Tel: 0404 895 938
(POsted 1st July 2013

Victoria 

 

(VIC, Mt Waverly) 2012 Roland 54" LEC-540 CMYK+White+Gloss. 4 Colour print, Spot white, spot varnish, spot gloss/matte, emboss and texture print , contour cuts, perf-cuts. print and cut Take up machine. Under warranty (almost 2 years remaining). Serviced by Roland technicians. Selling to upgrade to a larger machine. $55,000 plus GST Pick up from Mt Waverley, Victoria. Call 0433776076
(Posted 3rd July 2013)

  

(VIC, Dandenong) Manual Mounting and Cold Laminating Machine for sale. 1300mm wide x 22mm thickness. 8 months old. One owner. Will easily fit in trailer or Van. $ 550 Phone  0412 110 112
(Posted 26th June 2013)

(VIC, Mulgrave) SIAS MULTIFORMULA: TWO COLOUR
in line Sias screen print machine, manufactured 1992. Sheet size to print; 1820 x 1480 x 6 mm. Comes with squeegee's; scrapers; screens; take up box, it's working but surplus to requirements. Call  03 8769 0107  or  0408 336 330
(Posted 24th June 2013)

(VIC) Brunswick Roland Versacamm VS-640
with take up roll great machine just serviced selling to upgrade to a PRO4 XF-640 $23,000 Tel: 0448237777
(Posted 23rd June 2013)

  

(VIC, Seaford) Mighty Hat Press - Heat Press -  good quality. As new Condition for applying heat transfer labels to hats. $500
Cold Laminator - manual type - 1300MM wide. Good condition - great for mounting prints to sub-straight $550
Victoria Numberplates:  "DSIGNZ" Great for Signwriter / Designer. Black and White. $500
Tel:  0412 908 152
(Posted 19th June 2013)

(VIC,East St Kilda.) Electric Cold laminator
for quick sale. 1440mm wide appplikator 4R plus Emseal brand. In perfect working order. Demonstration welcome.Qucik sale price $1500. Tel:  03 95371110
(Posted 19th June 2013)

(VIC, Ballarat) FOR SALE ROLAND Pro III XC540-MT
1370mm/54".(CMYK+Metallic & White).
This machine has not had allot of use and is surplus to our needs.
$17,000+GST
Phone: Adam Heath  0417 588 898  
(Posted 18th June 2013)

(VIC, Geelong)1 mimaki jv3 160s and jv3 160sp
for sale with spare parts will need heads. Must Sell
$2200 all up.. Phone  0409 183 965
(Posted 16th June 2013)

 

(VIC, Cheltenham) FOR SALE Roland VS540 Print and Cut running dual CMYK 440ml cartridges. Always serviced by Roland, still has warranty. Lives in controlled print room so is in perfect condition. Takeup reel and Ink included. Ready to go. $16,000+GST ONO
Call Glenn 0425 270 899
(Posted 5th June 2013)

(VIC, Dandenong) Screen Printing Machine with UV Dryer. 2004 Sias Area Ultra P. Print Bed 3800x1600mm. Comes with 18 screens meshed in 140T various sizes, Squeegees, Coaters & Footprint of printing machine & dryer 10.5x2.8mtrs. MAKE AN OFFER TODAY! Contact Marc 03 9706 4755
(Posted 5th June 2013)

 

(VIC, Tullamarine) 2 x Mimaki JV3 160 SPT Solvent Digital Printers $8000 each
1 x Hot and Cold Laminator KALA 1600 wide $9250
1 Hand Lamination rollers $650
1 Screen Printing exposure table with Vacuum 1800 x 1500 $1500
1 Screen Drying Oven 1800 x 1500 x 2000 with Trays
Various Real Estate advertising Boards
11 Bays of Pallet racking $1000
Contact Lyndon 0418 528 524
(Posted 30th May 2013)

(VIC, Campbellfield) Vutek PV200SC. 2004 Model. Converted to 4 colour.
Operational, but has issues. Suit either enthusiast to fix, or wrecked for spare parts. Buyer to Remove $15,000. Tel: 0414775526
(Posted 27th May 2013)

 

(VIC, Dandenong South) TECO 2 phase induction motor for sale.  $800.00. Tel:  0402 918 207
(Posted 17th May 2013)

(VIC, Dandenong South) Argon Screen Printing Machine. Clamp Shell. Vacuum Base 940 x 720.  Excess to our needs.  Not sure if still working as it has been in storage for a few years. $700.00. Calender / Roller heat press. Good condition. $7000. Tel:  03 9768 2332
(Posted 14th May 2013)

 

(VIC, Dandenong) Screen Printing Machine with UV Dryer. 2004 Sias Area Ultra P. Print Bed 3800x1600mm. Comes with 18 screens meshed in 140T various sizes, Squeegees, Coaters & Footprint of printing machine & dryer 10.5x2.8mtrs. MAKE AN OFFER TODAY!
(Posted 7th May 2013)

 

(VIC, Moorabbin) Stylus Pro 9900 Printer. The new generation 44 inch large format printer that deliver even higher levels of image and colour quality, productivity and cost-effectiveness. Check the specs on http://www.epson.com.au/Prographics/products/largeformat/DisplaySpecs.asp?id=styluspro9900
Asking $6500.00. Tel: 0400 175 100
(Posted 30th April 2013)

 

(VIC, Dingley Village) New Print head 2 EPSON DX4 SOLVENT (Mimaki - Roland) for SALE - $650 each 0408270722
(Posted 25th April 2013)

 
(VIC, Dandenong) Mimaki JV5-160S 64 Inch, Super High Speed Solvent Printer.
Running 4 DX-5 heads! (2 are new with receipts) 5 Years old, working well.
$9,000+GST. Contact Ernie on 0428180407
(Posted 15th April 2013)

 

(VIC, Caulfield) Grapho Octopus UV Flat Bed printer with roll feed. Hardly used since new. Can print doors, banners substrates up to 2 mtrs wide X 9cm depth $10,000 Tel:  03 95236026
(Posted 8th April 2013)

 

(VIC, Carrum Downs) "Eye - One" x-rite colour calibration system, complete set in excellent condition, comes with Certificate of Performance. Please contact David  0409 183 176 , Location Melbourne
Selling $900 incl GST
(Posted 3rd April 2013)

(VIC, Parkdale) Agfa Sherpa 43. Best offer or free. Has not been used in 5 years, may work or may be good for just parts.
0412238122
(Posted 2nd April 2013)

 

(VIC, Melbourne) Hi, i am after a DONGLE for a SP300 for running versa works. Give me a call on 0450664771
(Posted 17th March 2013)

 

Queensland

(QLD, Brisbane, Acacia Ridge) Roland SC-540__ for sale
(Grenadier SP-1400c). Bulk ink system and serviced by Colour Grafix. Tel: 07 3275 7900 or 0410 564 244
(Posted 4th July 2013)

(QLD, KINGSTON) Roland SolJet ProII - Print&Cut SC-540
- Bulk Ink System Installed - $7500ono Tel: 0409 223 031
(Posted 4th July 2013)
 
(QLD,Blackstone) Roland VersaCamm VS-640 Printer with take-up roller + Royal Sovereign heat assist Laminator with take-up roller. Items were purchased new December 2010 and has a full service history with very little use. $29,000.00 Please call  0423 552 032  or email [email protected] Equipment relocated at buyers expense
(Posted 26th June 2013)
 
(QLD, Toowoomba) Roland XC540 Pro III
with dryers and take-up unit. Serviced since new by Sign Essentials. Great workhorses but now one is surplus to needs. 2007 Model $13000 or 2011 Model $17500. Tel:  0402 546 596
(POsted 23rd June 2013)

(QLD, Gold Coast)  Roland SP540V
in tip top condition along with Guillotene, laminator, rolling table, all stock and spares along with software etc.
$16,500.00 phone Clint, Graphic Promotions 0408 894127
(Posted 19th June 2013)
 
(QLD, Sunshine Coast )
Mutoh Toucan Full solvent printer 2200mm wide printer is working on CMYK but can print on CMYK Lc Lm with 2 new heads also includes Air Extractor Unit price $5000 Chris Taylor  0418 411 544
(POsted 19th June 2013)
 
QLD, TOWNSVILLE. Roland AJ1000
grand format printer. Approx. 5 years old.
Good condition, needs 1 replacement head to be in good working order or as is for spare parts.
Make an offer. Geoff Gracie  0400 455 405 .
(Posted 18th June 2013)

(QLD, Gold Coast) DGI VT111-98DF Solvent Printer,
- 2.5m Wide; - 4 Colour; - 8 Heads
- In working order; - MAKE AN OFFER
TEL: 07 5576 8124
(Posted 29th May 2013)

(QLD, Maroochydore) Summa S75 T series cutter we purchased this cutter brand new and only used twice. Has True Tanginial Head and can cut 3m dg3 not a problem. also made a flat bed table for it which can bolt on or off. $7000 Tel: 0408887298
(Posted 28th May 2013)

(QLD, Underwood) MUTOH ValueJet 2606 100 inch (2500mm)Wide GRAND FORMAT BANNER PRINTER. Bulk ink system, In working condition perfect for large banner prints.$6950.00
Phone 0415 219 520 for more info.
(Posted 27th May 2013)

(QLD. Gold Coast) Mimaki CJV30-160 Print and Cut In excellent condition very little use complete with take up rollers, Rasterlink software and variety of print media. phone Dennis 0410751381 $13,500 ono
(Posted 27th May 2013)

(QLD, Windsor) EcoSol MAX 440ml Inks. 2xCMYK + 1xLC&LM. Inks never used and still in original plastic. Quick sale $1000 for 2 x CMYK sets, $200 for 1ea LC&LM. John  0417 784 563
(Posted 15th May 2013)

(QLD, Sandgate) Roland SC-500 (54") (Good for Parts) Externally in good condition, 6 colour. When printing, quality was very good! Genuine Roland heat system. Manual & some software can be given. $1600 - All reasonable offers considered. Contact: Trent  0411 88 48 71
(Posted 9th May 2013)
 
(QLD, Gold Coast) Roland SolJet Pro II Print & Cut SC-540. Heater with auto take up reel. 7x440 spare EcoSol cartridges. Versaworks. Great Condition $12500 plus GST ONO. 0755305569 0412306991
(Posted 8th May 2013)

(QLD, Brisbane) CNC Router/Engraver 1200 x 1200 x 100 mm. Excellent condition, had very little use. 3hp , 24000 rpm Spindle motor. Includes Type 3 software for XP, 2hp dust extraction unit, range of collets and tool bits. Also has spares kit including boards and motors. Price $5,750 [email protected] or  0428 042 804
(Posted 3rd May 2013)
 
(QLD, North Brisbane) Roland XC540, excellent working order, serviced every 3 months, complete with 1 to 2 full sets of ink. $15,200, Call  0422 268 687
(Posted 2nd May 2013)
 
(QLD, Gold Coast) - Seiko 104s 2.5m wide format printer. New heads, can run on either OEM inks or BULK aftermarket ink. All working except for the take-up which needs attention. Nice quality prints. Surplus to our needs as we have upgraded to a 2.6m Latex. For further info please call Peter on  0421 382 666  or email [email protected]. BEST OFFER BY END OF MONTH AND IT'S YOURS! We need the room!
(Posted 1st May 2013)
 
(QLD, Gold Coast) - Konica Minolta 6500 (65 pages per minute) SRA3 sheet-fed printer complete with fiery RIP. Includes 8000 sheet high capacity feeder, booklet maker, folder, stapler and scanner. Will print 350gsm card stock and anything below. Excellent condition with 2/3's of life capacity still remaining. Recently had full programed maintenance and ready to go for new owner. Perfect for those who wish to enter the digital print market with a high quality, high speed printer. We have just upgraded to a faster machine and this is surplus to our needs. See working. Phone Peter on  0421 382 666  or email [email protected] to arrange a demo. $12,000 plus GST - an absolute bargain!
(Posted 1st May 2013)

(QLD, Brisbane south side) Surplus 8ft x 4ft sheets of white composite ($299 + gst for 10) Call Helen 3390 3796 or pick up at 173 Redland bay rd Capalaba. Delivery can be arranged at $35 per sheet.
(Posted 23rd April 2013)
 
(QLD, Pialba) Bargain Buy - UV Flatbed Digital Printer. 2008, Flora Printer F1 - 180UV with full software ready to go PLUS a second 2006 LJ II1800-UV flatbed printer (used for parts). This is a fantastic opportunity to get into the UV flatbed market and save a fortune by printing directly onto substrates. This machine is capable of printing CMYK plus White.  Printable surface area is 1.8 m wide by maximum width of your media with max media thickness of 48mm. Machine has had some new heads installed. At a comparable price of $135,000 new, this is a bargain buy at only $50000 for both. Flaar Report available. Contact Darryl 0418797544 or [email protected]
(Posted 22nd April 2013)

(QLD, Gold Coast) Mutoh 1614 Printer, Immaculate condition, Very little work. Mutoh auto take up system, Prints perfectly. Fast and Reliable Mutoh wave technology $8,950 + GST Phone  0415 219 520
(Posted 16th April 2013)
 
(QLD, Underwood) Roland XC-540 54 Inch Print and Cut Machine with Optional Dryer Unit.
Just serviced and warranty until 11/13.
Includes Transport, Installation, Full Training and Software. $18,000+GST. Contact Dan on 0448888128
(Posted 15th April 2013)
 
(QLD, Underwood) Roland XC-540 54 Inch Print & Cut Machine with Optional Dryer Unit.
Just serviced and full Warranty until 06/2014.
Includes Transport, Installation, Full Training and Software. $18,500+GST. Contact Dan on 0448888128
(Posted 15th April 2013)
 
(QLD, Gold Coast) Roland Hi-Fi JET PRO II 1370mm wide Print & Cut hardly used. Prints up to 28 m�/hr (300 sqft/hr) Powerful and easy-to-use Roland ColorRIP™ RIP included $5490.00 + GST. Phone  0415 219 520
(Posted 25th March 2013)
 
(QLD, Gold Coast) Wanted. Epson GS6000 in good working order,Cash buyer. 0438136869
(Posted 25th March 2013) 

 

South Australia  

(SA, Prospect) Teckpro UV3000 Flatbed and Teckpro S3200 Roll printer, UV3000 appears to function but requires print head repairs & S3200 had some water damage but has been running since.
 Both are sold as is where the buyer is to dismantle & remove, both were around $400K in 2007. Sell both for $16,000 inc GST.
Contact Barrie on 0412 575 864
(Posted 3rd July 2013)


(SA, Lonsdale) Mimaki JV33 160 Solvent Printer.
Current model printer complete with brand new bulk inking system still in its box. Excellent condition with low use at around 10-15 hours per week. Printer has been professionally cleaned and shutdown ready for transport. $16,900. Telephone  08 8384 4800

(Posted 19th April 2013)

(SA, Woodside, Mount Barker) John Heine Sheetmetal Guillotine. Cut .8 sheet 1200mm, Manual, Good Condition. small footprint, suit a small sign shop. Price $2,000.00 negotiable. PH:  0457 860 024  [email protected]
(Posted 22nd March 2013) 
Western Australia

(WA, Beaconsfield) Konica C6501 Production Printer Copier. Excellent machine with fantastic Colour output and reliability. Has spare Fixing unit for SRA3 and spare Toners. Serviced and maintained by Konica. Upgrading to new machine. Would keep as backup but dont have the space. All genuine offers considered. $15,000 inc gst Tel: 0893315453
(Posted 1st July 2013)

See all the 2nd hand machinery available at Wide Format Online magazine. 

Click here 

-----------------------------------------------------------------------------------------------------------------
Employment
Advertise your vacancies in the magazine with the most wide format printer readers (+/-40,000 per month) in our region and/or our newsletters with the largest and most focused database on wide format printing available in the ANZ region.
If you would like to run an ad in this section AND in Wide Format Online magazine just
click here 
for the application form.
Cost is @1.30 + GST per word
-------------------------------------------
For free ads only in Wide Format Online magazine, just
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to [email protected]

 
(NSW, Broadmeadow) Large Newcastle signage/print company. Looking for experienced printer operator, to run flatbed and solvent printers (using Onyx rip). Tel:  02 49695700
(Posted 26th June 2013)
 
(NSW, Tweed Heads South) Qualified Signwriter required.
Progressive business requires highly motivated person who will be dealing directly with customers. Experience Corel Draw, large format printers, vinyl application & installation essential. Adobe Illustrator & Photoshop advantage. Please contact Tony on  07 5523 3553  or email CV to [email protected].
(Posted 23rd June 2013)

(QLD, North Brisbane) Experienced talented sign installer
required with sign manufacture, assembly & installation skills. Vinyl application skills essential - experienced in all shop duties is an advantage. For further details : [email protected] or  07 3285 8166
(Posted 19th June 2013)
 
(Indonesia) Currently my job is a technician, handling jeti machine in indonesia(solvent and uv). i am looking for technician job in australia
in any areas ASAP. email me for more detail cv [email protected]
(Posted 16th June 2013)

(New Zealand, Mount Muanganui) New Position Created - Printer / Presser & Dispatch 
Continued growth means we have created an extra role - to ensure we meet client demands. The role is primarily for sublimation heat pressing and sublimation printing duties. Enjoy an innovative environment with creative and motivated team. [email protected]. Tel & Fax numbers:  0064 7 5756305
(Posted 11/06/2013)

(NSW, Minto) Customer Service/Telesales
Owing to our growth, we are in need of an additional experienced person to fill a full time (8.00 a.m. to 4.30 p.m.) Customer Service cum Telesales Role. The role is varied and busy. Knowledge regarding print media and substrates will be favorably viewed.  
If you are a motivated person with a can do approach to any challenge that may arise on a day to day basis, we would like to hear from you.  
Resume to: [email protected]
(Posted 30th May 2013)
 
(NSW, Sydney) Halifax Vogel Group (HVG) is a privately owned Australian company that imports and distributes aluminium composite material, graphics media, industrial fabric, decorative fabrics and films, decorative building products, engineered stone, packaging materials and exhibition systems throughout Australasia with distribution centres in all major capital cities.
Due to expansion and growth our Customer Service Department requires a motivated Customer Service representative with minimum 3 years customer service experience.
What skills do you need?
* Passion for first class customer service
* Positive and can-do attitude
* Exceptional attention to detail
* Computer literacy and confidence in using multiple applications
* Ability to work under pressure
* Initiative
* Excellent verbal and written communication skills
* Reliability
* Building Industry knowledge a bonus
Is that you? ... Your role will involve...
* Handling telephone and email sales for a key brand
* Resolving customer issues
* Liaising with our field sales team and other internal staff to ensure high service levels,
* Recording and maintaining accurate information in custom database; and entry and tracking of sales orders.
We can offer you...
* A competitive remuneration package
* Full training and support
If you would like to become part of a dynamic growing organisation, apply now.
Applications should be directed to Jennifer Dolden, NSW Customer Service Manager, HVG - at [email protected]
(Posted 28th May 2013)
 
(QLD, Ipswich/Brisbane) Work wanted - I am looking for Employment. excellent Offset, Digital & wide format printer, with installation experience.estimating, stock control & outsourcing.100% reliable, honest & hard working.please e-mail for full CV. [email protected]  (Posted 25th May 2013)

(NSW, Sydney) We are offering a full time position for a sign application 
who will be head of production who is motivated and enthusiastic to join our team. All applicants must meet the following criteria:
- ability to communicate with colleagues and management in a professional manner
- ability to follow directions well
- ability to work with and handle vinyls for applying on vehicles and panels
-wrapping of cars is a bonus
-some experience required
-pay negotiatble
-ute provided 
IMMEDIATE START!!
Tel:  0416227767 
(Posted 13th May 2013)
 
(QLD, Coopers Plain) Signwriter/ All rounder 
Immediate start for right person.  Experience in Graphic design/digital print and Vinyl cutting and applying.  Email [email protected] or phone  07 33444333   (Posted 13th May 2013)  
(QLD, Brisbane North) Busy Safety sign business is seeking an industry sales person
to help drive our organisation into several key markets. Must have proven sales skills. Please email an intro letter & resume. Tel:  07 3284 9326

(QLD, Brisbane South Side) Work wanted

Need Competent Friendly Help ? Qualified Experienced Signwriter reliable self employed 30yrs.
broad industry skills , creative artistic talent.  seeking regular subcontract work Brisbane southside based.
will travel , hourly rate plus costs. Jules  04 11 10 10 10
(Posted 17th April 2013)

VIC, Carrum Down) Experienced Banner Sewing Person , we required experienced person to sew banners and help with production of displays
Please email your resume to [email protected]
(Posted 3rd April 2013)

(NSW, Liverpool) Experienced Vehicle Wrapper,
Cut Vinyl and Digital Print Applicator required for busy sign shop. Must have at least 4 yrs experience in vehicle wrapping and vinyl installation. Experience with Illustrator and Flexi-Sign desirable but not essential. Must have an attention to detail. Please email your resume to [email protected]
(Posted 2nd April 2013)

(QLD, Stapyton) LEADING HAND view to PRODUCTION MANAGEMENT
Progressive signage and printing company with the latest technology seeks a well qualified tradesman (min 10 years) with a wide variety of experience in both digital printing and sign fabrication. Required: Min 3 years of large format printing both flat bed and roll to roll. Ability to meet tight deadlines, manage and motivate production personnel, including apprentices, to achieve high volumes accurately and on time. Knowledge of laminators, routers, vinyl plotting and relevant materials and finishing processes.
Tel: 0411074779
(Posted 27th March 2013)

(NT, Darwin) SIGNTECH IS ONE OF DARWIN'S LEADING AND LARGEST SIGN COMPANIES
We specialise in all types of signage including Vinyl cutting, Wide format digital printing, CNC profile cutting and manufacturing of Illuminated signage, pylons, 3D lettering, and building signage.
DUE TO A VERY STRONG LOCAL ECONOMY WE NEED STAFF TO KEEP UP WITH DEMAND
WE HAVE THREE POSITIONS ON OFFER:
Vehicle Wrapper, Cut Vinyl and Digital Print Applicator:
Desirable: Experience in vehicle graphics, car, boat and van wrapping.
You will be responsible for preparing and installing vehicle signage whilst also attending to our clients general signage requirements.
You must have 3 or more years experience in vehicle wrapping, an eye for detail, conscientious, reliable, work well under pressure, take pride in your work  and want to join our dynamic, professional team.
Signwriter, Sign Manufacturer, Sign Installer:
Desirable: Experienced in all forms of signage manufacture including Illuminated signage, pylons, 3D lettering and building signage.
You will be responsible for fabricating and installing LED lit 3D acrylic & aluminium letters, illuminated signs, ACM fabricated sign panels, Steel & aluminium sign frame fabrication, pylons as well as all other general signage.
You must have 3 or more years experience in sign fabrication, have a positive "can do attitude" and strong work ethic, attention to detail, commitment to quality and productive output, flexibility to work early or late hours and travel if necessary, confident with working at heights and heavy lifting, white card & EWP tickets (preferred) and experience in the sign industry is a must.
Graphic Designer - Signage:
Desirable: Experienced in designing all types of signage including Vehicle & Boat wraps, Vinyl cutting, Wide format digital printing and CNC profile cutting
You will be responsible for creating artwork from simple way finding signs to colourful and impressive vehicle wraps or eye catching displays. This is a chance for someone with creative flair to show their talent on a sometimes large canvas!
You must have 3 or more years experience designing signage for the sign industry, be creative, proficient in Adobe Creative Suite and Flexisign (or similar) and be able to provide a portfolio including visual examples of your sign industry experience
These are all full time positions with excellent wage packages on offer to the right applicants, depending on their experience and ability.
Please email your resume by COB Fri 19th April to [email protected], fax 08 89844624 or just give us a call  08 89844474
(Posted 26th March 2013)

(NSW, Sydney) Product Support - Sydney
Company Background: Roland DG Australia is a market leader of digital format printing machines based in the Northern Beaches area of Sydney.
Roland DG is seeking a Product Support person with relevant experience to join our team to
assist Roland customer's located in Australia, South East Asia and New Zealand.
You will be joining a dynamic team in a well established company with twenty five years of
operating inside of Australia.
Final salary will depend on qualifications and experience.
Candidate:
*    Proven track record in a product support role
*    Excellent oral and written communication skills
*    Good interpersonal skills
*    Strong time management skills
*    Must be computer literate
*    Maintain and build relationships
*    Experience and knowledge of Roland Versa Works
*    Experience in the operation of Roland production printers.
*    Exposure to design programmes eg. Flexi design, Corel draw
*    Team player
Benefits of the Role:
*    Competitive salary
*    Great team environment
To apply for this great opportunity, please send your resume to
To be eligible to apply for this position you must have an appropriate Australian work visa.
(Posted 26th March 2013)

(NT, Darwin) Signwriter / Designer wanted.
Immediate start. Above award wages. Knowledge of Signlab / Photoshop desirable. Work with flatbed / latex printers / cnc router also desirable.
Contact Brad -  0439 874 123
(Posted 20th March 2013)

(NSW, Sydney) We are offering a full time position for a sign writer/installer or production manager
who is motivated and enthusiastic to join our team. All applicants must meet the following criteria:
- ability to communicate with colleagues and management in a professional manner
- ability to follow directions well
-drivers license is NOT a requirement
- ability to work with and handle vinyls for applying on vehicles and panels
-some experience required
Call John on  0416227767
(Posted 7th March 2013)


See all the positions vacant/wanted at Wide Format Online magazine

click here 

------------------------------------------------------------------------------------------------------------
Businesses for sale/wanted
Advertise your Business in the magazine with the most wide format printer readers (+/-40,000 per month) in our region and/or our newsletters with the largest and most focused database on wide format printing available in the ANZ region.
If you would like to run an ad in this section AND in Wide Format Online magazine just
 click here 
 for the application form.
Cost is @1.30 + GST per word
-------------------------------------------
For free ads only in Wide Format Online magazine, just
Photos can be added at $12.00 + GST, Send the photo (125 pixels wide) to [email protected]
 
(VIC, Melbourne) Embroidery Company for sale, 3 machines with solid client base and good profit . Owner looking to concentrate on other areas. Ph. Sue 0409283428
(Posted 1st July 2013)

(QLD, Sunshine Coast) Sign & Sticker business for sale
established over 10yrs Roland Printer, laminator & vinyl cutters, shop on busy main rd with cheap rent, have other commitments sell at bargain price. PH  0402 728 917  
(Posted 22nd April 2013)
 
(SA, Port Pirie) Sublimation, vinyl cutting and photo enlarging business.
Epson 4880 hybrid + inks; 52" vinyl cutter; cap/hat / t-shirt/flat and mug heat presses. Heaps of blanks, paper and vinyl etc $6399 ono TONY - 0438600054 
(Posted 22nd April 2013)

(VIC, South East Melbourne) Signage & Digital Print Business for Sale.
Roland VP-540 Printer.Main Road Location. Excellent Potential. Est.-1996. $45,000.  0418 351 615 . 
(Posted 3rd April 2013) 

 

See all the businesses for sale/wanted at Wide Format Online magazine

click here   

-----------------------------------------------------------------------------------------------------------------
TAFE News

TAFE NSW, Ultimo Face Book page -  Click here
TAFE NSW - enrolments are now underway, Click here for more details.
TAFE NSW - WorldSkills newsletter - Click here to view
TAFE NSW - click here for the latest newsletter
TAFE NSW -  click here
Illawarra Digital Signage course
Recognition of prior learning

TAFE NSW WorldSkills Newsletter - click here to view

Brisbane's Southbank Institute of Technology Apprentice Workshop Dates for 2013 - click here
-------------------------------------------------------------------------------------------------------------------
Clever Dog or What!!
Clever Dog or What!!
Quick Links
Useful Directory Links
Find A Printer
Find A Designer (New)
Suppliers (A-M)
Suppliers (N-Z)
Who Represents Who
Who Supplies What
The Green Product Directory
 Who's Who in Wide Format Printing

If you or your products are not listed in the appropriate director, click the link at the top for the application form for a free listing.
Discussions/Questions:

plus many more...
Time out


Ricky Richards

Des replacement ad

    
Fujifilm logo

Colourgrafix ad

Celmac ad

Spandex sponsor ad


See all our  videos on
See all our newsletters on Twitter
See all of our newsletters on

Wide Format Online magazine| PO Box 793, Aspley, QLD 4034| 07 3863 2822| [email protected]| www.wideformatonline.com
Copyright © 2012. All Rights Reserved.