WELCOME to Learn, Innovate, Excel! Our goal with this newsletter is to provide useful information and tips that will help you save time, be more productive, and also reduce risk. This information complements our SE University program, by introducing you to tips on a wide variety of topics affecting structural engineers.
If you have any tips you would like to share as part of a future Learn, Innovate, Excel newsletter, please email Lisa Willard or Brian Quinn. |
|
 UPDATED AISC 358 DOCUMENT NOW AVAILABLE
AISC recently issued a press release that a Second Supplement for ANSI / AISC 358 has been issued in 2014. ANSI / AISC 358 is the standard that provides information about Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, including some proprietary connections.
One of the primary changes from Supplement No. 2 is the inclusion of the proprietary SidePlate moment connections for prequalified connections. For more details...read more
|
DESIGN VALUES FOR VISUALLY-GRADED SOUTHERN PINE DIMENSION LUMBER
New design values went into effect approximately one year ago (June 1, 2013) for visually graded Southern Pine. These values had been approved by the American Lumber Standard Committee, and apply to new construction only.
To help explain some of the changes that were made, and which type of products were affected, Catherine Kaake, PE, of the Southern Forest Products Association, and Buddy Showalter, PE, of the American Wood Council, answered a series of Frequently Asked Questions ...read more
|
SE UNIVERSITY ANNOUNCES THE SEU RESOURCE CENTER
SE University™ is pleased to announce the launch of SEU Resource Center™ to further assist our SE University Clients. The goal of this client portal is to provide companies with additional technical information, and allow clients to manage their SE University subscriptions with greater ease.
We hope SEU Resource Center will be a valuable tool, and a beneficial part of every SE University subscription.
For a quick overview of the benefits of the SEU Resource Center, please watch the following 90 second informational video.
|
COMING NEXT MONTH TO SE UNIVERSITY - FREQUENTLY ASKED QUESTIONS ABOUT COLD-FORMED STEEL
On June 11th, we will be welcoming Roger LaBoube from Missouri University of Science & Technology, for an SE University session on Frequently Asked Questions About Cold-Formed Steel.
Handouts and registration emails for this session will be sent to SE University companies on Friday, June 6th.
|
STATES WITH UPCOMING LICENSE RENEWALS
Summer is here! You may have license renewals coming up, and as always, you can use the upcoming SE University sessions to help you meet your continuing education requirements. If additional hours are needed, please contact Lisa Willard to discuss how we can help you.
The following states have license renewals on June 30th:
|
Delaware*
|
Oregon (Last Names S-Z)
| |
Kentucky (Last Names L-Z)
|
Rhode Island*
| |
Massachusetts*
| South Carolina | |
Minnesota
| West Virginia | |
Montana
| |
The following states have license renewals on July 31st:
|
Indiana
|
Wisconsin
| |
Vermont*
|
|
The following states have license renewals by September 30th:
|
District of Columbia* (August 31st)
|
Louisiana (September 30th - some engineers)
|
*These states do not have continuing education requirements.
In addition to the states listed above, there are other states that may require renewal based on your initial date of licensure or other rules for that state. Please check your license information to confirm your renewal dates.
For more information about license renewal, please visit our Continuing Education Requirements by State page, where you can click on states in which you are licensed to see the license renewal date, as well as the continuing education requirements for that state. If you would like a complete summary of all 50 states, a PDF file is available for download below the map. This option can also be selected if you are viewing the page from a mobile device.
We hope that you find this information beneficial. If you have any questions, please contact Lisa Willard.
|
|
|
Thank you for reading our Learn, Innovate, Excel Newsletter - we hope you found this information useful. If there are any questions we can answer, please do not hesitate to contact us by phone or email.
Additionally, if you would be willing to help other structural engineers by sharing tips that you have, please email your tip to Tips@LearnWithSEU.com. If we choose your tip to publish, you will have your choice of a $50 Amazon gift card or a $50 donation sent to the Structural Engineering Association of your choice.
Regards, Your SE University Team
Brian Quinn, P.E.
Brian.Quinn@LearnWithSEU.com
Lisa Willard, P.E.
Lisa.Willard@LearnWithSEU.com
Linda Benson
Linda.Benson@LearnWithSEU.com
|
|
|
|
Coming Soon to SE University
ALL SESSIONS 1.5 HOURS (1.5 PDHs) UNLESS NOTED OTHERWISE
June 11, 2014
Frequently Asked Questions About Cold-Formed Steel
Roger LaBoube, PhD, PE
Missouri University of Science & Technology
July 9, 2014
Legal Issues Impacting Shop Drawing Review/Submittals
Matthew Rechtien, PE, Esq
Bodman Law
August 13, 2014
Using Tuned Mass Dampers to Control Floor Vibrations
Reza Kashani, PhD, PE
DEICON
August 27, 2014
SEU BIM Forum Session
This session will be one hour
September 10, 2014
SEU Core Session
October 8, 2014
SEU Core Session
October 22, 2014
SEU BIM Forum Session
This session will be one hour
November 12, 2014
Ethics in the Practice of Professional Engineering
Vincent Drnevich, PhD, PE
Purdue University
This session will be one hour
For updated session descriptions and schedules, visit the SCHEDULE page.
|
|
|
