Syracuse University School of Information Studies'Center for Convergence and Emerging Networking Technologies (CCENT) did a comprehensive study of real-world Wi-Fi performance and determined what can be expected from leading suppliers including Aruba, Aerohive, Cisco, Meraki, and Ruckus Wireless. 

 

The comprehensive testing, performed by faculty and graduate students in Syracuse's School of Information Studies, is the first view into the real-world performance of emerging three-stream 802.11n enterprise Wi-Fi systems. New three-stream 802.11n access points use multiple Wi-Fi radio chains to simultaneously transmit different streams to receiving devices. Three-stream capable receiving devices are able to combine these streams to achieve higher data rates. Typically Wi-Fi vendors quote the theoretical maximum data rate of 450 Mbps for each radio. 

CS In-Wall/In-Ceiling Series

Your client can enjoy high-performance from an in-wall/in-ceiling speaker with Paradigm's CS Series affordable audiophile custom collection. Pure-aluminum domes and mineral-filled polypropylene cones. The die-cast or glass-reinforced polymer chassis and full-perimeter brackets on the previous CS Series v2 are the most rigid designs on the market. Our latest CS Series v3 speakers take high-performance one step further. The bezel-free aesthetic ensures true invisibility in a wall or ceiling and new rigid, resonance- and vibration-resistant ABS chassis/clamping system makes these new models even easier and faster to install. Same great performance. Same great sound.

Even when the finest speakers are perfectly positioned, the room can have a dramatic impact on sound quality. Room dimensions, dead spots, archways, even furniture can turn a room into an additional instrument adding unwanted coloration and resonances. ARC adjusts for the room's effect on the speakers in a way that mimics our hearing. This way your Anthem gear and Paradigm speakers can do what they do best: allow your client to lose themselves in the music or movie.

• ARC analyzes each speaker's in-room response then sets output levels, crossover frequencies and correction parameters for each.
• ARC applies correction for up to 7 channels plus the sub!
• Unlike other room correction systems, ARC allows for multiple microphone measurements. Multiple mic positions allow for peaks and nulls to be identified allowing for far more accurate room correction.
• ARCuracy! The connected PC's 64-bit floating point processor calculates the correction curves to the n'th degree of accuracy.
• Separate configurations for music, movies or any other application where more than one configuration is useful.
• ARC applies correction to peaks and dips in room response - tackling both ensures a far more natural and accurate response!
• Fully automated or manual setup - with ARC you choose!
• ARC Version 1M connects via Ethernet
• ARC version 1M Includes a higher level of digital signal processing allows for even greater
  precision in correction curves.
• ARC prints 'before and after' room-measurement graphs for your client  

The New Anthem MRX Receivers All Include ARC!

 

From the high performing MRX receiver mix you can find exactly the best receiver for your client's system. See the entire line up here.

 

Perfect Bass Kit (PBK) Ready

Although correct placement plays a key role in optimizing subwoofer performance, positioning a subwoofer often requires compromises. Not anymore, thanks to MartinLogan's Perfect Bass Kit (PBK, sold separately @ $99). The Dynamo 1500X is MartinLogan's first subwoofer to feature PBK room correction. PBK uses a computer and microphone to listen throughout the listening environment and tailor the sub's performance to the unique acoustic properties of a room-resulting in clean, powerful, authoritative bass down to 20Hz.

Powerful, High-Excursion 15-inch Woofer

Dynamo 1500X features advanced MartinLogan design concepts. A high-resolution, low-distortion 15-inch woofer delivers huge excursion and sound output while preserving minute bass details, all without a hint of distortion. The cone material's exceptional damping properties ensure the smooth, non-resonant response necessary for seamless blending with MartinLogan electrostatic panel and Folded Motion driver technologies.

 

Unique Front-Firing, Down-Firing Design

Placement flexibility is maximized by the subwoofer's front-firing or down-firing options. When placed in a cabinet or other discreet location, the Dynamo 1500X subwoofer can easily convert from standard down-firing to front-firing orientation, with no tools or special skills required. A grill cover and 90-degree RCA adaptors are provided for use in front-firing applications. Further flexibility is afforded by custom energy transfer coupler (ETC™) spikes, which can enhance stability on thick carpets, or create tighter coupling between subwoofer and floor to enhance overall sound quality.

Advanced Ultra-Efficient Amplifier Design and Inverse Mathematical Equalization (IME) Filter

An IME filter is derived from the inverse of the unfiltered driver response. Precision IME filtering yields extremely accurate low-frequency response-far superior to that provided by the simple second-order high-Q filters typically found in most subwoofers in this price range. The Dynamo 1500X delivers a true 650 watts of continuous power and 1300 watts peak. An energy-conscious design, the Dynamo Series amps consume only 10 watts in standby mode.

Sealed Cabinet with Extensive Internal Bracing

Although ports are a convenient and cost-effective way of increasing low-frequency output, when used in small cabinets their reliance on resonant energy impairs bass quality. A compact, sealed subwoofer system minimizes transient-blurring group delay while maintaining smooth, consistent response, regardless of music or movie source material. The Dynamo 1500X's cabinet is constructed from the finest composite material for acoustic integrity. Inside, critically placed structural cross-bracing acts as an excellent baffle for the woofer, while the added rigidity keeps cabinet-induced resonances and non-linearities to inaudible levels.

Seamless System Integration-Engineered for Stereo and Home Theater

Comprehensive signal connections along with low-pass filtering and phase control make the integration of Dynamo 1500X subwoofers into a multi-channel home theater or stereo music setup a simple and seamless process. The main left/right line-level inputs feed into a precision low-pass filter with a cut-off frequency variable from 35 to 150 Hz. For systems in which a surround processor supplies the crossover, the Dynamo Series offers a LFE input, via either XLR or RCA connections, which bypass internal filters. Additionally, a trigger input allows processors to turn the Dynamo 1500X on and off via a 12V trigger connection.

Energy Transfer Coupler (ETC) Spikes

The Dynamo 1500X comes with custom ETC spikes which can be used in place of the feet to enhance stability on thick carpets, or create tighter coupling between subwoofer and floor to enhance overall sound quality.

 

Sleek and sexy, Séura's Storm is in a league of its own. Outdoor technology is known for robust, industrial aesthetics. With the new Storm, Séura breaks new ground. Beauty is in the details. With a seamless glass face, discreetly beveled edge, subtle aluminum mitered frame, and tapered profile, Storm is the latest masterpiece from Séura designers. Boasting features that outperform other solutions, Storm's elegant design changes the game. Add style to any outdoor space while offering the best in performance with Storm. At Séura, elegance is never compromised.

 

No other TV is brighter. We don't give a NIT. We give 700.

Storm is so bright, it offers a beautifully vivid picture even on the sunniest days. While most other outdoor TVs rate at 450 nits or less, and indoor TVs at under 200 nits, the Séura Storm offers a noticeably brighter image. No need to worry about screen blackout. Your client can watch their Storm TV in full sun! Consistently reliable, Storm always performs rain or shine.

 

SilverStar™ 3D-P is Vutec's award winning 3D-P + 2D + HD in one optimal projection screen. This comprehensive screen is truly in a class by itself. Delivering the ultimate in picture quality, providing high brightness, vivid colors, ultra high gain, high contrast, and a wide viewing area. SilverStar 3D-P's superior performance begins with its innovative technology, a silver-based material to provide the ultimate performance.

 

This state-of-the art technology increases color saturation while expanding contrast in controlled or uncontrolled lighting environments. Image brightness loss from viewing through 3D glasses diminishes approximately 50%. This is created by the polarization process that is creating the 3D effect. By utilizing SilverStar 3D-P, the viewer will reclaim light loss to produce a vivid 3D viewing experience.

 

SilverStar™ 3D-P is custom made to order. With unsurpassed versatility, SilverStar 3D-P is the screen of choice for a true cinematic experience.

 

Planar® UltraRes™ Series UR9850 is a 98" ultra HD (3840 x 2160) professional LCD display that supports large rooms by providing a seamless, single-display
solution to applications previously requiring a tiled video wall. Designed for resolution-rich commercial applications, the Planar UltraRes UR9850 combines
4K clarity with state-of-the-art design and performance.The Planar UR9850 can move seamlessly between 2D and passive glasses, continuous stereo 3D, making it the ideal display for customers who work with 3D and 2D visual
information for big data analysis, simulation and a range of uses in the design industry.

T55

Universal tilting mount for 32" to 55"+ flat panel screens.

For the ultimate viewing experience, the NR1605 features an advanced video section that supports full rate (60 Hz) 4K Ultra HD highest resolution video, a feature of the latest HDMI specification, along with analog to HDMI conversion.

 

Read more about the NR1605 here.

 

Download a manual for the NR1605 here.

 

• 192 kHz/24 bit sampling rate
• Five digital inputs, including USB
• Variable analog output
• Beautiful industrial design of glass and aluminum
• Frequency Response
• +/-0.5dB from 4Hz to 20,000Hz
• +0.5/-3dB from 4Hz to 68,000Hz (Source dependent) 
• Total Harmonic Distortion 
  0.002% 
• Variable Output level
  0-4.0Vrms Unbalanced/0-8.0Vrms Balanced 
• Signal-to-Noise Ratio (A-Weighted) 110dB 
• Dynamic Range 
  100dB
• Output Impedance
  600 ohms Unbalanced and Balanced
• Digital Input Format SPDIF (PCM) 
• Digital Input Sample Rate
• Coaxial and Optical: Up to 192KHz, 24 Bit
• USB: Up to 192KHz, 32-Bit 
• Digital Inputs 
• Coaxial 1 and 2: 0.5V p-p/75 ohms
• Optical 1 and 2: - 15dbm to -21dbm (TOS Link) 
• USB: USB Type B Connector