Sorting and Reporting Strategies - 12/17/15

Pass Quality Audits - 1/14/16

There's a Better Way to Handle Service Requests - 1/28/16

See the full webinar schedule here and if you're interested in maintenance management webinars, click here.

A trigger code is a unique code number required to register your GAGEtrak license. If you don't obtain a trigger code within 30 days of installing GAGEtrak, you will receive a message from GAGEtrak saying that your trial period has expired. Obtaining a trigger code will remove this expiration date. You may also require a new trigger code after reinstalling GAGEtrak because of a workstation upgrade or if GAGEtrak is moved to a new workstation.

Click here for trigger code instructions.

When calibrating gages, printing labels is a big part of your job. Instead of having to select a label each time, you can set your most commonly used label as the primary default label. This can save lots of time if the majority of your gages all use a particular label size, and for those few that need a different size, you can set those gages to have their own default label.

In GAGEtrak 7, navigate to the Setup -> Settings -> Cal. Options tab and then in the lower right corner, choose your Default Calibration Label size. This is the primary default label which will be used for every gage unless specified otherwise in the gage record. Now every time you enter a new calibration, the default label will already be selected.

For any gages that require a label size other than the primary default, navigate to the Gages -> Schedule tab and then select the Default Calibration Label for that particular gage. This selection will override the primary default label chosen in Settings.

When using default labels, just make sure your printer is loaded with the correct label size and then calibrate and print!

We encourage you to explore the additional capabilities of your GAGEtrak software and as always, keep an eye out for future Tech Tips.