December 2014
CyberMetrics 1-800-777-7020
eView Newsletter Header
IN THIS ISSUE
Click a topic to jump right to it!

Don't forget to upgrade to GAGEtrak 7.0.3! 

 

Industry News - The Basics of Gage R&R  

 

Have you checked out CalPro yet?    

 

Trigger Code - What it is, why you need one and how to get one 

  
  
  
UPDATEDON'T FORGET TO UPGRADE TO GAGEtrak 7.0.3!
The GAGEtrak 7.0.3 update includes enhancements to the database connection interface to allow customers with multiple databases greater flexibility when creating and saving connections. This update also addresses several issues from earlier versions; for a list of these issues, please click here.

To update or upgrade your GAGEtrak software to version 7.0.3, contact us today!

1-800-777-7020
sales@cybermetrics.com
industrynewsINDUSTRY NEWS
The Basics of Gage R&R

Every manufacturing company that gets audited, anywhere in the world, is required to do gauge R&R studies. In some cases, this one study is the only chance to find unknown problems with measurement quality (when problems do occur, it is often downstream from calibration). For this reason, it is important to clearly understand gauge R&R studies and make the most of the results.

 

[full story]
WebinarsFREE WEBINARS
Real-world Industry Solutions for Quality Management Professionals
Go ahead and sign up for every webinar of interest to you. Even if something comes up that day and you miss it, you can catch the next one.

Pass Quality Audits - 12/4/14
Register Now   More Info

There's a Better Way to Handle Service Requests - 12/18/14
Register Now   More Info

Using the Wrong Tool Will Cost You - 1/8/15
Register Now   More Info

Can't Seem to Find Your Gages? - 1/22/15
Register Now   More Info

Record Cloning - 2/5/15
Register Now   More Info


See our full schedule of webinars here.

Interested in free Maintenance Management webinars? Click here.
TrainingGAGETRAK TRAINING
Shorten the Learning Curve
This special, one-day MSA training class is being held the day before a two-day GAGEtrak 7 class in the same location.  

GAGEtrak MSA Training
Nashville, TN - December 10th
Register Now   More Info


Our two-day, hands-on regional training classes will take you step by step through planning, preparation, setup and successful operation of GAGEtrak. You'll learn how to save time, avoid common mistakes and get the most out of your software.

GAGEtrak 7
Nashville, TN - December 11-12
Register Now   More Info

GAGEtrak 7
Houston, TX - January 8-9
Register Now   More Info

GAGEtrak 6.8
Phoenix, AZ - January 22-23
Register Now   More Info

GAGEtrak 6.8
Livonia, MI - February 12-13
Register Now   More Info

GAGEtrak 7
Dublin, OH - February 26-27
Register Now   More Info


See our full schedule of regional classes here.
  
If you can't get out of the office for a regional class, contact us to learn more about web training and on-site training:
1-800-777-7020 or sales@cybermetrics.com
TechTipTECH TIP
Test Point Groups in GAGEtrak 7 - Part 3
As a continuation of our last tech tip, this tip will go a bit more in depth using a 6 inch caliper. The Test Points for this basic gage might appear to be as simple as those of the micrometer; however, a complete testing of the gage is involved. The testing requirements for a caliper include but are not limited to: overall condition, parallelism (inside and outside jaws) and measurements of the inside jaws, outside jaws and depth gage. The overall tolerances for this company's calipers are +/- .001, with looser tolerance on the depth gage of +/- .01, resolution .0005. There must be three measurements across the range of the gage for each jaw and depth, not including 0 or 6 inches.

[Read the full tech tip]
QUICK LINKS
  
 
 
consultation
data import
on-site implementation
on-site validation
on-site training
regional training
web training
 
 
GAGEtrak Calibration Management Software
 
SUPPLIERtrak Supplier Quality
Assurance Software
 
FaciliWorks Maintenance Management Software
Desktop, Server and Hosted
FeaturedProduct
HAVE YOU CHECKED OUT CALPRO YET?
It's a must for any calibration department.
CalPro is a comprehensive database of step-by-step calibration procedures covering more than sixty commonly used inspection gages, instruments and reference standards.

Any or all CalPro procedures can be imported into GAGEtrak using the import utility provided or printed as hard copy from the included Word document. CalPro can also be used without GAGEtrak as a library of work instructions for inclusion within your company's Quality Manual.

Check out the CalPro table of contents and sample procedure here.

Don't waste time entering procedures by hand - get CalPro today!

Call us at 1-800-777-7020
or email us.

TRIGGER CODEtriggercode
What it is, why you need one and how to get one

A trigger code is a unique code number required to register your GAGEtrak license. If you don't obtain a trigger code within 30 days of installing GAGEtrak, you will receive a message from GAGEtrak saying that your trial period has expired. Obtaining a trigger code will remove this expiration date.

 

You may also require a new trigger code after reinstalling GAGEtrak because of a workstation upgrade or if GAGEtrak is moved to a new workstation. 

 

If you are using GAGEtrak 6.8, please click here for trigger code instructions.

 

If you are using GAGEtrak 7, please click here for trigger code instructions.  

 

 


Join Our Mailing List

 

CyberMetrics 1-800-777-7020  
Stay In Touch

   Like us on Facebook  Follow us on Twitter  Connect with us on LinkedIn  Watch us on YouTube
      

Copyright © CyberMetrics Corporation. All Rights Reserved.