Blackfox_Banner
Blackfox Class Schedule
July - December 2014   
We Teach and Certify in All 5 IPC Training Programs! 
All classes are available for both Instructors (CIT) and Operators (CIS) at your facility or one of our locations listed on the schedule below.
IPC-A-600 Training from Blackfox
IPC-A-600
Nearly everything in the Electronic universe depends on a circuit board.  The IPC-A-600 Acceptability of Printed Boards is the industry's most recognized standard for acceptability of circuit boards, and makes a powerful statement to users that a company is serious about continuous quality improvement. This training starts by establishing the importance between the IPC-A-600 and the IPC-6012, Qualification and Performance Specifications for Rigid Boards.  Anyone involved in Purchasing, Board Inspection, or specifying circuit board needs, and is seriously interested in technically accurate training should attend this course.


IPC-A-610 Training from BlackfoxIPC-A-610 The Acceptability of Electronic Assemblies is IPC's most widely used standard with an international reputation as THE source for end product acceptance criteria for consumer and high reliability assemblies. IPC-A-610 is a visual collection of the acceptability requirements for Mechanically Secured Assemblies, Through Hole and Surface Mount Soldered interconnections, and the associated processes to achieve them. This visual standard reflects the requirements of other existing IPC standards. IPC-A-610 certification will demonstrate your company's commitment to customer requirements and will greatly assist any company dedicated to quality assurance initiatives.  Anyone who is responsible the quality and reliability of electronic assemblies should consider this comprehensive and technically accurate program.


I
PC/WHMA-A-620 The industry's first standard for Cable and Wire Harness Fabrication and Installation. IPC/WHMA-A-620 describes acceptability criteria for crimped, mechanically secured and soldered interconnection and the corresponding lacing or restraining criteria associated with the Wire and Cable Harness Industry. This certification will demonstrate your commitment to customer requirements and greatly facilitates other quality assurance initiatives. Anyone responsible for quality, reliability and integrity of end use Cable or Wire Harness assemblies should attend this in-depth program.

SPACE ADDENDUM AVAILABLE AS AN OPTIONAL ADD-ON!

IPC J-STD-001 Training from BlackfoxIPC J-STD-001 The Requirements for Soldered Electrical and Electronic Assemblies has emerged as the preeminent authority for Electronic Assembly Manufacturing. This standard defines the materials, methods and verification criteria for producing high quality soldered interconnections. This standard emphasizes process control and gives companies all the tools they need to increase employee skills and performance. J-STD recognition sends a strong message to customers that your company is serious about implementing company wide quality assurance initiatives. Anyone responsible for quality and reliability of soldered electronic assemblies should attend this hands-on course.
SPACE ADDENDUM AVAILABLE AS AN OPTIONAL ADD-ON!

IPC 7711/7721 Training from Blackfox
IPC 7711/7721 The Printed Circuit board is loaded with expensive components and direct labor, and it does NOT work! There is no starting over, and the choices are limited. IPC's Rework, Repair, and Modification Training offers your company the money saving alternative! This course teaches industry approved techniques on Through Hole and Surface Mount Rework, and Land, Conductor, and Laminate Repair. Clearly the greatest asset of this program can be measured in the dollars saved on restoring expensive electronic assemblies. Anyone responsible for ensuring and maintaining the quality and reliability of your completed assemblies should consider this highly skilled hands-on program.

July 2014

Classes held in Longmont, CO:
 
IPC-A-610
Jun 30-July 3
IPC 7711/7721
July 7 - 11
IPC/WHMA-A-620
July 8 - 11
IPC/WHMA-A-620 B-Space Addendum
July 14 - 18
IPC J-STD-001
July 14 - 18
IPC J-STD-001 RECERT
July 21 - 22
IPC/WHMA-A-620 RECERT
July 21 - 22
IPC-A-610 RECERT
July 23 - 24
IPC 7711/7721 RECERT
July 23 - 24
IPC-A-600
July 28 - 30
Customizable Basic Hand Soldering
July 28-Aug 1
Classes held in Phoenix, AZ:
 
Customizable Basic Hand Soldering
Jun 30-July 3
IPC J-STD-001
July 7 - 11
IPC 7711/7721
July 14 - 18
IPC-A-610
July 21 - 24
IPC-A-610 RECERT
July 28 - 29
IPC J-STD-001 RECERT
July 30 - 31
Classes held in Dallas, TX:
 
IPC-A-610
July 21 - 24
Classes held in Guadalajara, JA:
 
IPC-A-610
July 15 - 18
IPC J-STD-001
July 21 - 25
IPC/WHMA-A-620
July 28 - 31

August 2014

Classes held in Longmont, CO:
 
IPC J-STD-001
Aug. 4 - 8
IPC/WHMA-A-620 w/ opt. Hands-On
Aug. 4 - 8
IPC-A-610
Aug. 11 - 14
IPC 7711/7721
Aug. 11 - 15
IPC J-STD-001 RECERT
Aug. 18 - 19
IPC-A-610 RECERT
Aug. 18 - 19
IPC 7711/7721 RECERT
Aug. 20 - 21
IPC/WHMA-A-620 RECERT
Aug. 20 - 21
IPC-A-600
Aug. 25 - 27
Customizable Basic Hand Soldering
Aug. 25 - 29
Classes held in Phoenix, AZ:
 
IPC J-STD-001
Aug. 4 - 8
IPC/WHMA-A-620
Aug. 11 - 14
IPC-A-610 RECERT
Aug. 19 - 20
IPC J-STD-001 RECERT
Aug. 21 - 22
IPC/WHMA-A-620 RECERT
Aug. 25 - 26
Customizable Basic Hand Soldering
Aug. 27 - 29
Classes held in San Jose, CA:
 
IPC-A-610
Aug. 11 - 14
Classes held in Guadalajara, JA:
 
IPC-A-610
Aug. 12 - 15
IPC J-STD-001
Aug. 18 - 22
IPC/WHMA-A-620
Aug. 26 - 29
Classes in Penang, Malaysia:
 
IPC-A-610
Aug. 19 - 22
IPC J-STD-001
Aug. 25 - 29

September 2014    

Classes held in Longmont, CO:
 
Customizable Basic Hand Soldering
Sept. 2 - 3
IPC/WHMA-A-620
Sept. 2 - 5
IPC 7711/7721 RECERT
Sept. 4 - 5
IPC 7711/7721
Sept. 8 - 12
IPC-A-610
Sept. 15 - 18
IPC J-STD-001
Sept. 15 - 19
IPC/WHMA-A-620 B-Space Addendum
Sept. 22 - 26
IPC-A-610 RECERT
Sept. 22 - 23
IPC/WHMA-A-620 RECERT
Sept. 24 - 25
IPC J-STD-001 RECERT
Sept. 29 - 30
IPC-A-600
Sep 29-Oct 1
Classes held in Phoenix, AZ:
 
IPC-A-610
Sept. 2 - 5
Counterfeit Component Detection
Sept. 3 - 4
IPC 7711/7721
Sept. 8 - 12
MIL-STD 883/750
Sept. 8 - 11
IPC J-STD-001
Sept. 15 - 19
IPC-A-610 RECERT
Sept. 22 - 23
IPC J-STD-001 RECERT
Sept. 24 - 25
Customizable Basic Hand Soldering
Sep 29-Oct 1
Classes held in Guadalajara, JA:
 
IPC-A-610
Sept. 9 - 12
IPC J-STD-001
Sept. 15 - 19
IPC/WHMA-A-620
Sept. 23 - 26
Classes in Penang, Malaysia:
 
IPC/WHMA-A-620
Sept. 2 - 5

October 2014

Classes held in Longmont, CO:
 
IPC J-STD-001 RECERT
Oct. 1 - 2
IPC 7711/7721
Oct. 6 - 10 
IPC-A-610
Oct. 6 - 9
IPC/WHMA-A-620 w/ opt. Hands-On
Oct. 13 - 17 
IPC J-STD-001
Oct. 13 - 17  
IPC J-STD-001 RECERT
Oct. 20 - 21
IPC-A-610 RECERT
Oct. 20 - 21
IPC/WHMA-A-620 RECERT
Oct. 22 - 23
IPC 7711/7721 RECERT
Oct. 22 - 23
IPC-A-600
Oct. 27 - 29
Customizable Basic Hand Soldering
Oct. 27 - 31
Classes held in Phoenix, AZ:
IPC/WHMA-A-620 RECERT
Oct. 2 - 3
IPC/WHMA-A-620
Oct. 6 - 9 
IPC 7711/7721
Oct. 13 - 17 
IPC J-STD-001
Oct. 20 - 24
IPC J-STD-001 RECERT
Oct. 27 - 28
IPC-A-610 RECERT
Oct. 29 - 30
Classes held in Dallas, TX:
 
IPC-A-600
Oct. 20 - 22 
Classes in Guadalajara, JA:
 
IPC-A-610
Oct. 7 - 10
IPC J-STD-001
Oct. 13 - 17
IPC/WHMA-A-620
Oct. 21 - 24
IPC 7711/7721
Oct. 27 - 31
Classes in Penang, Malaysia:
 
IPC 7711/7721
Oct. 13 - 17
IPC-A-600
Oct. 20 - 22
IPC-A-610
Oct. 28 - 31
 

November 2014    

Classes held in Longmont, CO:
 
IPC-A-610
Nov. 3 - 6
IPC J-STD-001
Nov. 3 - 7
IPC 7711/7721
Nov. 10 - 14
IPC/WHMA-A-620
Nov. 11 - 14
IPC/WHMA-A-620 B-Space Addendum
Nov. 17 - 21
IPC J-STD-001 RECERT
Nov. 18 - 19
IPC-A-610 RECERT
Nov. 20 - 21
IPC/WHMA-A-620 RECERT
Nov. 24 - 25
IPC 7711/7721   RECERT
Nov. 24 - 25
Classes held in Phoenix, AZ:
 
IPC-A-610
Nov. 3 - 6
IPC J-STD-001
Nov. 10 - 14
IPC/WHMA-A-620 RECERT
Nov. 17 - 18
IPC J-STD-001 RECERT
Nov. 19 - 20
Customizable Basic Hand Soldering
Nov. 24 - 26
Classes held in San Jose, CA:
 
IPC-A-610
Nov. 10 - 13
Classes held in Guadalajara, JA:
 
IPC-A-610
Nov. 11 - 14
IPC J-STD-001
Nov. 17 - 21
IPC/WHMA-A-620
Nov. 25 - 28
Classes in Penang, Malaysia:
 
IPC 7711/7721
Nov. 24 - 28

December 2014

Classes held in Longmont, CO:
 
IPC/WHMA-A-620 w/ opt. Hands-On 
Dec. 1 - 5
IPC J-STD-001 
Dec. 1 - 5
IPC-A-610 
Dec. 8 - 11 
IPC 7711/7721 
Dec. 8 - 12 
IPC-A-600
Dec. 15 - 17  
IPC J-STD-001 RECERT
Dec. 15 - 16 
IPC-A-610 RECERT  
Dec. 17 - 18  
IPC/WHMA-A-620 RECERT 
Dec. 18 - 19 
Classes held in Phoenix, AZ:
 
IPC 7711/7721
Dec. 1 - 5
IPC/WHMA-A-620
Dec. 8 - 11 
IPC J-STD-001 RECERT
Dec. 15 - 16 
IPC-A-610  RECERT
Dec. 17 - 18 
Customizable Basic Hand Soldering
Dec. 22 - 23  
Classes held in Guadalajara, JA:
 
IPC-A-610 
Dec. 2 - 5
IPC J-STD-001 
Dec. 8 - 12
Classes in Penang, Malaysia:
 
IPC/WHMA-A-620
Dec. 1 - 4
IPC J-STD-001 
Dec. 8 - 12
 
Jump to Month
July
August
September
October
November
December
Ready to register?

We can also teach at your facility!  For more information:
Sharon Montana-Beard
VP Sales & Operations
303-684-0135
888-837-9959
[email protected]
Blackfox is proud to offer the B-Space Addendum for the IPC/WHMA-A-620!

Space Addendum for IPC-620

 Click here to download brochure (pdf)

Learn about how Blackfox is training and preparing US Military Veterans for employment in the aerospace industry!

army_soldiers.jpg

 Click here to download brochure (pdf)

Visit our website
visit our newly designed website
www.blackfox.com
Download our free mobile app!
Download our free mobile app
Access course schedule, research different classes, find a location near you and more!  Scan QR code to download now.
Blackfox Online Store
ONE STOP SHOPPING!

Training materials from Blackfox
Training Materials for Instructors

feeder-setup assessment
Assess Employee Skill Level

IPC Authorized Distributor
Purchase IPC Materials

Purchase Solder Training Kits
Purchase Solder & Wire Training Kits

  www.blackfoxonline.net

Follow Blackfox:

Become a Facebook Fan of Blackfox!
Facebook

LinkedIn
LinkedIn

Contact us for pricing or more information:
Sharon Montana-Beard
VP Sales & Operations
303-684-0135
888-837-9959
[email protected]