July 2016

Tip of the Month.......

Plug Gages
Plug Gages


 Plug Gage Care & Handling
  1. Cleanliness is Critical: remove dirt, coolant, chips & other debris
  2. DON'T use The Force: always use light pressure; excess force yields bad results
  3. Get Protection: nicks and burrs will give misleading results
  4. Hands Off: avoid touching gage surfaces as fingerprints promote corrosion
  5. When It's All Over: wipe down and lightly oil your pin gage for longer life
Key points to consider for keeping inspections with Gage Pin under control:
  • Send out complete sets of pins for an annual calibration -even unused pins
  • Keep gage pins oiled and lubricated
  • Ensure all chips have been removed from your gage pins before storage -a final wipe down is smart to keep your pins ready for the next technician


To order Pin Gages please contact:

 Newman Tools:  1-800-465-1384 (US and Canada) OR 613-836-6776
 sales@newmantools.com

 




 
 
 
Featured Product Of the Month
Have you been looking for Miniature Thread Rolling Dies?    
Micro Miniature Thread Rolling Dies
Micro Miniature Thread Rolling Dies
  
We stock the smallest sizes starting from .30mm - 1mm.

Main advantages of thread rolling:
  • Better thread quality
  • High machining regularity
  • Increased thread resistance
  • Reduced breaking points
  • Better surface values on the thread flanks and on the thread root
Made in Switzerland

Please click here for more information or to order on-line:
  Micro Miniature Thread Rolling Dies

 
  

 Phone: 1-800-465-1384 (US and Canada) or 1-613-836-6776 (internationally)





Tap and Die Specialist
Tap and Die Specialist

We have a huge assortment of standard and special sizes including inch, metric and British sizes. Did you know you can order special size taps manufactured in 24 hours?

adjustable reamer
Adjustable Hand Reamer



Newman Tools stocks
 HSS Adjustable Expanding Hand Reamers and Pilots 
Screw Thread Kits and Inserts
Screw Thread Kits and Inserts

We stock  a huge variety  including: BSW, BSF, Metric and Metric Fine

Quick service and delivery!


Joke of the Month

We would like to thank Brad Dunlop for this joke.


A man is driving down a deserted stretch of highway when he notices a sign out of the corner of his eye. It reads: Sisters of St. Francis House of Prostitution, 10 Miles.

He thinks ...Is it a figment of his imagination and drives on without second thought.
 Soon he sees another sign, which says: Sisters of St. Francis House of Prostitution, Next Right.

His curiosity gets the best of him and he pulls into the drive. On the far side of the parking lot is a stone building with a small sign next to the door reading: Sisters of St. Francis.

He climbs the steps and rings the bell. The door is answered by a nun in a long black habit who asks, "What may we do for you, my son?".

He answers, "I saw your signs along the highway, and was interested in possibly doing business."

"Very well, my son. Please follow me."

He does as he is told and another nun in a long habit, holding a tin cup, instructs, "Please place $100 in the cup, then go through the large wooden door at the end of this hallway".

He gets $100 out of his wallet and places it in the second nun's cup. He trots eagerly down the hall and slips through the door, pulling it shut behind him.

As the door locks behind him, he finds himself back in the parking lot, facing another small sign: Go in Peace. You Have Just Been Screwed By The Sisters of St. Francis.

 Serves You Right, You Sinner!