Download UltraCool-2000 literature >>

OptiPro is now offering UltraCool-2000, a new coolant that has been designed to yield optimal performance of precision optics manufacturing equipment. The chemical properties of UltraCool-2000 help set it apart from other coolants available in the marketplace. A head-to-head comparison and evaluation of the four leading precision optical coolants shows how UltraCool-2000 stacked up against the competition in terms of Ph, % Active Solids, Initial Foam Height, and Foam Collapse Time: 

Note: Foam Cell testing was done at 30/1 dilution, Run time 1 min.

Of the 4 coolants involved in the experiment, 2 were oil-based and 2 were fully synthetic. With today's highly restrictive waste disposal regulations, disposing of both "Competitor 1" and "Competitor 2" could be highly problematic if they were to be put down the sanitary sewer. Both materials could carry significant sewer sir charges for exceeding federal hexane extractable limit for oils and greases. Materials like "Competitor 2" are susceptible to freeze damage and separation which can severely damage their performance. 

UltraCool-2000 had the lowest foam levels of all test coolants and showed by far the fastest foam kill time (about 48% faster). There was no distinctive odor and showed less than half the potential to mist as compared with all other test coolants. UltraCool-2000 also released entrained micro-foam more than 37% faster than any other material, meaning max flow to the grinding head was much higher. In addition, UltraCool-2000 showed significantly higher levels of surface finish with much lower energy at the grinding interface.

OptiPro offers the following state-of-the-art metrology solutions for precision optics manufacturers:

OptiTrace 5000 Contact Profilometer	UltraSurf Non-Contact Metrology System	PRO Tower Vertical Interferometer
UltraCURV Precision Spherometer	XONOX CT200 Center Thickness Gage	XONOX VT1200 Vertical Interferometer

Each solution has unique capabilities to address different optical requirements, but all of which are engineered to deliver high precision and accuracy. 

This 20-minute webinar will focus on the capabilities and benefits of the advanced optical metrology solutions manufactured by OptiPro and XONOX. Learn how metrology equipment from OptiPro and XONOX can have a positive impact on your company's bottom line by increasing throughput and ensuring quality of precision optics.

Webinar presentation will take place from 2:00 PM until 2:20 PM EST and a 10 minute Q&A will follow.

Get more information

Register Now 

Visit OptiPro at Booth 518

During the week of February 10th, Jayson Tierson, OptiPro's Director of Technology Solutions, will be traveling throughout California to meet with companies interested in learning more about how teaming with OptiPro can revolutionize your precision optics manufacturing capabilities. If you would like to set up an appointment with Jayson, please contact Danielle Bechtold at dbechtold@optipro.com or call 585-265-0160.