COLD JET LAUNCHES E160 PELLETIZER |
New pelletizer provides best output to smallest footprint ratio in
dry ice production
Cold Jet� - the world leader in developing innovative, environmentally responsible dry ice cleaning solutions and production equipment - announces the launch of the E160 Pelletizer, a highly efficient dry ice extruder that has minimal space requirements and is designed to manufacture 3mm-16mm dry ice pellets and nuggets on demand. The E160 Pelletizer provides the best output to footprint ratio in dry ice production and has the lowest maintenance cost and lowest energy consumption.
"The E160 Pelletizer is easy to operate, can go to full production in less than three minutes and requires only half of the normal space needed by similar dry ice production equipment on the market today," said Wim Eeckelaers, Senior Vice President, Global Dry Ice Manufacturing, Cold Jet.
In addition to its compact footprint, the fully automatic E160 Pelletizer produces up to 160 kg (352 lbs) per hour of consistent, high density dry ice pellets or nuggets on demand; has the highest liquid to solid conversion rate; is simple to operate - either as a standalone machine or when integrated into an automated dry ice cleaning or surface preparation system; has a closed, stainless steel frame; can be operated from cylinders, dewars or storage tanks of liquid CO2; and has multiple industrial voltage ports, enabling global installations. Cold Jet once again sets a new industry standard for dry ice production with the E160 Pelletizer.
|
Application Spotlight: Plastics and Rubber
Steve Wilson, Director of Business Development, Plastics |
FREE Expo Hall Admission for NPE
Visit Cold Jet at NPE Booth # W103 in Orlando, FL on March 23-27 to learn how to improve quality, increase productivity and reduce costs through the use of dry ice cleaning systems. Observe and have the opportunity to participate in live injection mold cleaning demonstrations with our i3 MicroClean systems. Tour the Aero Series machines as well as the all-encompassing SDI Select 60. Watch our automated robotic environmental cleaning & surface preparation cell prepare plastic parts with dry ice prior to painting as well as debur machined plastic parts.
Stop by our booth, grab a beverage and experience the various Cold Jet production solutions currently implemented in the plastics industry.
|
Tech Tips
Tony Lehnig, Vice President of Technology |
1. Tips to Avoid Foreign Object Damage (FOD) While Dry Ice Cleaning.
Cold Jet Aero Series dry ice cleaning systems provides in-situ cleaning with no secondary waste or damage to the surface being cleaned over a wide array of industrial cleaning applications. Critical to assuring there is no damage to the surface being cleaned or to the Cold Jet equipment is the avoidance of foreign objects in the Cold Jet Aero Series Hopper. The provided tips are reminders of what all Cold Jet equipment users need to know as part of a regular dry ice cleaning process.
|
2. Cold Jet Nozzle Dry Ice Feed Rate Settings for Dependable Operation.
Cold Jet provides unique dry ice cleaning nozzles to cover the array of dry ice cleaning applications - including the Low Flow, Standard Flow and High Flow series. For trouble-free dry ice cleaning, it is important for the system operator to understand the proper dry ice feed rate for the particular nozzle used at a specific operating pressure, relative to the quality of compressed air supplied.
Quality primarily refers to the level of water content in the compressed air. The provided Low Flow, Standard Flow and High Flow Nozzle graphs below give the recommended feed rate for good (standard) compressed air quality with boundaries for exceptionally dry and wet compressed air supply, to which the operator can refer for the particular nozzle used.
*If operator is unsure what family their Cold Jet nozzle belongs to, compare the identifying number located on your nozzle with the list of nozzles on our website.
|
Customer Service
Darren George, Director of Customer Service |
i3 MicroClean Deluxe (DX)
Experience Cold Jet's patented shaved MicroParticle technology with the i3 MicroClean Deluxe (DX) upgrade. The i3 MicroClean DX is an optional upgrade that allows your MicroClean to shave both pellets and nuggets. MicroParticles allow you to clean and prepare surfaces with more precision, more delicacy, less air and less noise than traditional dry ice pellet blasters. With the DX add-on (available for new installations or for retrofit to your existing unit), operating the i3 MicroClean with pellets or nuggets is simple.
Please contact [email protected] or 1-800-777-9101 to see if this solution is compatible with your cleaning application.
|
Training Tip
Tyson Marlowe, Director Global Business Development, Training |
SureFlow Quick Disconnect Fittings
You can save time by using Cold Jet's new SureFlow Quick Disconnect Fittings to connect your blast hose to your dry ice cleaning system, applicator and/or other blast hoses. These ultra-light fittings are aerodynamically customized to ensure full particle flow through the fitting, maintaining particle integrity for maximum performance. Cold Jet SureFlow Quick Disconnect fittings are removable, so the end user can continue to use them on replacement hoses. Click below to learn how to connect �" and 1" blast hoses using these fittings.
|
FREE Webinar on In-Machine Mold Cleaning
Join us Wednesday, February 25th for a FREE WEBINAR about how recycled dry ice for in-machine mold cleaning can reduce operating costs, increase product yield, improve part quality and enhance both environmental and worker safety - all while extending the life of a mold.
|
|
|
May
20-23
Guangzhou, China
|
Link in with fellow industry leaders and contractors who also use Cold Jet equipment.
|
Share your dry ice cleaning projects and solutions. You could be featured in our next newsletter.
|
NATIONAL GEOGRAPHIC Showdown of the Unbeatables THE HISTORY CHANNEL Modern Marvels DIY NETWORK Cool Tools |
|
|