ECL-230D & ECL-230D-PH Exit Control Lock Exit Hardware
The ECL-230D and ECL-230D-PH are code compliant, battery alarmed, rugged dead bolt, panic devices with steel plate and photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits.
Benefits
 | Glow In The Dark Sign |
- Attack resistant design withstands over 2200 pounds of outside pull force
- Easy to install
- Proven durability and reliability at a reasonable price
- Easy to see if the lights go out
Features
- Single point, 1-inch throw dead bolt
- Corrosion resistant allow lock body
- 100 decibel alarm, powered by 9-volt battery
- Resetting the alarm can only be accomplished with a control key
- Non-handed
ECL-230D .............. $350.00 List Price
ECL-230D-PH ........ $393.00 List Price
ECL-600
Fire-Rated Exit Control Hardware
The ECL-600 is a fire-rated, code-compliant, rugged, dependable relatching exit device with a steel plate and photo-luminescent sign providing managed security and a 100 decibel alarm for secondary fire exits.
Please note, the ECL-620 trim can ONLY be used with the ECL-600 exit device.
ECL-600 ................ $627.00 List Price
|
_________________________________________________________
Tech Tip
The cover lock is the main way to access the battery on an ECL-230D, ECL-230D-PH, or ECL-600. When the battery needs to be changed, you will insert the key in the cover lock and rotate it until you can remove the cover. For more information, view the installation video.
Note: To replace the battery or to service the device, the control key must first be used to retract the bolt and disarm the alarm. The cover key can then be used to unlock the cover, enabling the cover to be removed.
When calling for support, you will be asked about a cover lock number. This number is located on the front of the cover lock cylinder.
|