For those who are looking for a simple to use controller with a bucket load of features your search ends here.         
.
Questions?  Give us a call!   260.728.9457
MICRO STORM PROGRESSIVE NITROUS CONTROLLER
Micro Storm Nitrous Controller

The Micro Storm Progressive Nitrous Controller provides control for 2 stages of nitrous in a extremely small package of just 2 7/8" x 1 3/4" x 3/4".

 

The billet aluminum encloser is anodized black with a 3 digit display and 3 high quality push buttons for easy programming and navigation through the setup menu.  The Micro Storm can handle 40 amps on each stage of nitrous so this tiny controller can be used with any nitrous solenoids on the market including Pulsoids, NX, NOS, Edelbrock, MPS, Dynotune and others.  Additionally each stage of nitrous can be programmed from 10-40 hertz and have a dual ramp to give you even more control of power down slippery tracks or to prevent those monster 1/8th mile or 3rd gear wheelies. 

 

This little jewel also has a TPS (throttle position) input and tach input for easy wiring on any vehicle.  A shift light output is also provided but can be configured for use as a timer output to activate a stage of ignition retard.

 

One of the best features of the Micro Storm is its ability to store up to 5 different nitrous configurations that you have programmed.  This is perfect for those who run in multiple classes that need more or less power to run their number.

  • Billet aluminum black anodized encloser with high quality push buttons for programming
  • Easy to read digital display
  • Controls 2 stages of wet and/or dry nitrous
  • Each stage can have its own hertz setting of 10-40 (cycles per second)
  • Dual ramp mode for each stage for more precise control
  • TPS and tach input for easy wiring and safety
  • Easy quick setup for TPS input
  • Shift light or timer output
  • Compact Size (2 7/8" x 1 3/4" x 3/4")
FEATURED BRAND

Schnitz Racing

 

Micro Strom Nitrous Controller

Micro Strom Nitrous Controller  

IN THIS ISSUE
HAYABUSA AIR SHIFTER/NITROUS WIRING HARNESS
HOT CAMS VALVE SHIM KITS
HTP BILLET DRY BLOCK SUZUKI HAYABUSA
QUICK LINKS
Shop
Tech

Find Us on Facebook 

HAYABUSA AIR SHIFTER/NITROUS WIRING HARNESS

Race Spec Hayabusa Wiring Harness

The Schnitz Racing Air Shifter/Nitrous Wiring Harness is a Race Spec Harness for the Suzuki Hayabusa that is completely plug and play.  No cutting, splicing or permanent change to your stock wiring harness.  We use premium, high quality wire, heat shrink and terminal connections that will last a lifetime.

 

One single toggle switch converts the horn and starter button into the air shifter and nitrous activation buttons and mounts onto the clutch lever perch bolt for easy access.

HOT CAMS VALVE SHIM KITS

Hot Cams Valve Shim KitKeep your valves properly adjusted with a Hot Cams Valve Shim Kit.

 

Excessivly loose or tight valve clearances can cause premature wear and even severe damage to the valves, valve seats and camshafts.  This can be avoided by checking these clearances periodically throughout the racing season.

HTP BILLET DRY BLOCK SUZUKI HAYABUSA

HTP Billet Hayabusa BlockHTP Performance is pleased to offer their Billet Aluminum Dry Block for the Suzuki GSX1300R Hayabusa.

 

These beauties are stock offset and stock deck height.  Available in 81mm, 84mm and 85mm and come Nickel Silicon Carbide coated from Millennium Technologies and ready to install.