|
True analog cylinder position monitoring
|
iNSiGHT® Analog Reporting, QVLA® TECHNOLOGY
Motion Controls LLC now offers our COST EFFECTIVE patented QVLA® sensing technology embedded within our air cylinders. Upgrade and update equipment with old reed switches, expensive bulky transducers or external potentiometers with iNSiGHT® Analog. Now for the first time repeatable proportional to rod position voltage signal is available in an NFPA footprint and in our popular non-NFPA footprint "D" Series. No additional electronics needed. Position reported with analog voltage via a three wire M8 IP67 cable carrying power, ground and signal. Voltage output is .5 to 9.5 VDC proportional to stroke.
"NAK" Series is equal to our "K" Series with iNSiGHT® Analog.
"NAD" Series is equal to our "D" Series with iNSiGHT® Analog.
|
For more information about Motion Controls LLC please contact your sales representative or click here. Watch a short video about QVLA being used in a pick and place operation here! Please take a look at the comments under the "about" tab. |
|
Not just another new contactor! The AF series from ABB.
|
|
|
Contactors for any use
The AF contactor range covers small motor starting solutions from 4 kW/5 hp up to big power switching solutions with our unique AF2650, the biggest single case block contactor in the world.
The contactor and motor protection range is part of one of the widest product offerings on the market meaning that ABB not only can provide the contactor but the full solution.
In addition to the standard product range ABB also offer products for special needs such as bar contactors, GAF and contactors for capacitor switching.
| 
|
Wide control voltage range
With conventional contactor technology, different contactors were needed for different network voltages. Thanks to the wide operating range of the AF contactor it can operate just as well in Europe as in Asia or North America. The core coil of the AF contactor range covers 100-250 V, AC/DC and 50/60 Hz.
Reliable in all networks
The electronic system within the AF contactor rectifies the AC or DC control circuit voltage to a DC control voltage that is applied on the coil. The contactor is safely operated in an always optimized condition making it virtually noise free.
| 
|
Four coils for the entire voltage range
The AF contactor features both AC and DC support. With the complete AF contactor range, functionality is improved. Still, the total number of product variants compared to a conventional range is reduced by 90%. Only four coils are required to cover 24 V AC, 20 V DC-500 V AC/DC.
Built-in surge suppression
With conventional contactor technology it is recommended to use an external surge suppressor, an accessory that could cost as much as half the contactor itself. With the AF technology the surges are handled by the contactor itself and the surge never reaches the control circuit. Neither the surge suppressor nor the actual surge has to be considered anymore. One less product and one less complication to worry about.
The AF contactor is compact
The AF contactor is compact in size and has had its width reduced by up to 30% thanks to an 80% reduction of the coil's energy consumption.
More functionality without adding width
The AF116...AF2650 can take up to two side mounted auxiliary contact blocks without adding to its width and are delivered with 1 N.O. + 1 N.C. as standard.
For current ABB contactor customers, please contact us for more information about a migration path to the new AF series. Pricing will remain the same and in some cases will be even more competitive (especially for DC coil applications).
Get more information regarding the new AF contactors from your sales rep or click here.
|
Your ASP Inside Sales Team
www.asplusllc.com
Todd Bacon
Technical Support/Sales
ToddB@asplusllc.com
Dennis Held
Director of Sales
DennisH@asplusllc.com
Peter Aston
Inside Sales
PeterA@asplusllc.com
715-355-0771
866-355-0771
715-355-9772 fax |
 |
