|
Ned Russell's Retirement
|
|
 With mixed emotions (happiness for him and Gayle and sadness for us), it is official Ned Russell is retired from Seven Oaks Doors and Hardware, Dec. 31, 2015. Shane Efird is replacing Ned as full time Product Application Specialist in Territory #4. Although Ned is retiring from full time employment with Seven Oaks Doors and Hardware, he will remain a contracting consultant for the transition period as he continues to coach and assist Shane in his new efforts. All correspondence and communication should be forwarded to Shane via email at sefird@sevenoakshardware.com or by phone at 704-608-5347. He will contact Ned with any assistance he needs for the transition period. We will miss Ned greatly. He has been a huge influence in the success of Seven Oaks Doors and Hardware over his 22 years, Beginning as our lead installer from 1994-2000, he moved into sales in April of 2000. Ned has become a highly respected specialist in the Door and Hardware industry in the Eastern parts of North and South Carolina and has represented our company very well.
Best wishes to a great employee and a good friend!
I appreciate you!
Ed Shimpock, AHC, VP and General Manager
|
| Seven Oaks Christmas Party |
|
|
| Recent Project |
Kings Mtn. Intermediate School
Cleveland County Schools Division 2
Before
After
We removed the old steel door and replaced it with a Special-lite FRP door using a continuous hinge and a new hold open door closer. We re-installed the electronic lockset and adjusted everything to close and latch properly.
|
|
Featured Product
|
|
Trimco's 1096/1097 Series Anti-Vandal Pull Handle
 Trimco is a proud and fiercely independent manufacturer of high performance architectural hardware, more commonly known as flat goods or trim. Trimco is probably best known for its heavy-duty door hardware products.
The 1096/1097 Series Anti-Vandal pull handle's surface area is larger than a mortise lock body. To mount the anti-vandal pull, welded solid steel threaded studs are through-bolted to the interior face of the door, eliminating exterior fasteners.
The 1096/1097 Series was designed to resist forced entry attacks by crowbars or chains and was developed for single and double doors equipped with exit devices, mortise locks or as a standalone handle only. For keyed lock applications, the mortise or rim cylinder face is the only exposed component on the anti-vandal pull. The handle portion has a plasticol coating which can change the ambient temperature of the pull up to 25 degrees, permitting safe door operation in extreme weather conditions.
Trimco anti-vandal products are available to mate with the most commonly used mortise locks, exit devices and cylindrical locks. They can be ordered with or without latch protection for single- or double-door applications.
|
