Ohlheiser Banner Image

May 2016

  
SMC LogoRefrigerated Air Dryers Series IDFB
Low pressure drop, compact design, rust prevention design

SMC dryers are insurance for down stream components, and in the long run, allow for sustainable performance and production for an end customer.  When considering a refrigerated dryer, Series IDFB can meet your dew point or dry air requirements for your compressed air.
  • Environmentally friendly R134a/R407C refrigerant
  • Simple control system, incorporating easy to read evaporator gauge
  • Stainless steel heat exchanger providing long life and low pressure drops - prevents rust formation
  • Compact design with staggered inlet/outlet ports for ease of installation - auto drain installed inside the dryer
  • 3/8" push-in condensate drain port

more information >

 
Prosix C8 Series 6-axis Robots
  

New Slimline, lightweight, long-arm robots help lower
barriers to automation

Robots in the new C8 series boast an 8-kg payload capacity, double that of the smaller C4 series. The higher transport load was achieved with the slimline arm thanks to Epson's unique vibration control technology. The higher payload capacity will allow the robots to use items such as heavier multi-grippers and tool changers, and will also enable the transport of heavy objects and the simultaneous transport of multiple workpieces.

Epson's C8XL, first long-arm model - boasts a maximum operating radius of 1,400 mm and its slender arm is better able to slip past surrounding objects without touching them.  These features make the C8XL the best model for machine tending in the auto parts and electronic industries.
 
  
Baumer Logo Absolute HeavyDuty Encoders 
Absolutely reliable under the toughest conditions

Under tough and in some cases very aggressive environmental and production conditions, Baumer HeavyDuty encoders have been proving their absolute reliability and unparalleled service life.
 
In the new series HMG 10 and PMG 10 encoders with Profinet are the first HeavyDuty encoders on the market which support the OPC UA communication standard and thus are ready for Industry 4.0 and the industrial Internet of Things (IIoT). The open and vendor-neutral standard guarantees secure and reliable data exchange between different systems.
 
The standard features of our absolute HeavyDuty encoders:
  • All common Ethernet and field bus interfaces
  • Additional SinCos signals with 32 periods per revolution
  • Additional square wave signals with up to 131 072 lines per output
  • Additional galvanically-separated outputs with zero pulse.
 
SMAC Logo Moving Coil Actuator Application
100% inspection and verification of critical automotive parts

Automotive industry parts and assembly quality standards have moved from sigma level sampling to zero defect requirements. These more stringent manufacturing results can be achieved through a combination of containment through 
100% inspections (eliminating bad parts) and correction through immediate feedback and adjustment. 

SMAC programmable actuators allow 100% detailed inspection and verification for all mission critical parts and are being used in a variety of automotive applications such as screw thread checking, switch testsquality measurement, effort testing, displacement testing and more. SMAC can provide unique inline quality control solutions that successfully automate inspection procedures.

 
Quick Links...
 
                   Our Website       Products      What's New      About Us      Contact Us
Join Our Mailing List