|
|
 Next Gen O500 and O300 Optical Sensors
Top performance in two sizes
 Baumer's new optical sensors are part of this tradition and are now available in two sizes: O500 followed by miniature O300. Both sensors provide the same performance level. Miniaturized O300 is particularly conceived for tight spots, whereas O500 stands out in applications where extended range is required.
With the first O500 series, Baumer has created a new performance category in optical sensor technology through consistent innovation.
The compact 1-inch dimension of the O300 sensor fits even into the tightest spots and provides an unparalleled performance level.
|
 S0700 5-Port Valve
Individual base mount
 SMC's S0700 series offers a compact valve and manifold design with high flow capacity. The 5 port solenoid valve has a 7mm width, and is available in both plug-in and plug lead types. Applicable manifolds include serial transmission types, D-sub connectors, flat ribbon cable, PC wiring system compatible, flat ribbon cable, terminal block, lead wire, and circular connectors.
- Rubber seals
- Fluid: air/inert gas
- IP40 enclosure
- Max. operating pressure: 0.7MPa
- Min. operating pressure: 0.2MPa
- Variety of applicable manifolds
|
 GT707 Wide Screen, Small Body HMI
Get 7 inch width in space of a 5.7 inch!
 The GT707 7 inch HMI can fit in a 5.7 inch type space, the screen shows more and the product looks greater. GT707 offers easy-to-view screen thanks to use of a TFT LCD with 500: 1 contrast ratio. The slim frame and body are designed for easy installation compared to LCD.
- 7 inch, 65,536 colors TFT LCD
- Device monitor show PLC status without a PC
- Built-in SD/SDHC memory card slot
- Integrated USB Interface
|
CTP Solenoid Locking Safety Switch
Electromechanical and modern transponder coded safety
 The new safety switch CTP combines the proven principle of operation of electromechanical safety switches with guard locking with modern transponder coded safety engineering. EUCHNER CTP Safety Systems are used to monitor the position of movable machine guarding by means of Inductive Coding. The safety switch CTP with guard locking is based on the proven transponder principle. These systems are designed for use in areas where a high level of tamper resistance and safety is required. The CTP is a narrow profile thermoplastic housing with integrated evaluation module making it a complete package.
|
|
|
|
|
|
