Ohlheiser Banner Image

May 2014

In This Issue:


SMC Chillers Solve Problems


New IP67 Photoelectric & Proximity Sensors


LEJ Series High Rigidity Linear Slider


6-Axis Robots - More Payload, Faster Speeds


Push-In Couplings with Audible "Click"

SMAC Moving Coil Actuators in the Packaging Industry
SMAC Moving Coil Actuators in the Packaging Industry
SMC Logosmc1SMC Thermo-Chillers Solve Problems! 

Review your cooling method using a Thermo-chiller


With an abundant lineup of models, SMC Offers the most suitable cooling solution for you company's specification.  The HRS Series of Thermo-chillers are available in air-cooled and water-cooled versions in capacities ranging from 1.0kW to 24kW with single-phase and 3-phase power supplies.


Thermo-chiller HRS offers convenient functions, self diagnosis and check display for easy maintenance.  An angled supply port facilitates the supply of circulating fluid, even when units are stacked.  A large digital display provides a clear view of the current and set values.  


HRS - Compact type, single phase 100/115VAC and 200 to 230 VAC

HRSE - Small basic type, Convenient point-of-use cooling

HRSH - Large type, 10kW to 25kW capacity with triple inverter control for outstanding energy savings


more information >

Panasonic logo baumerIP67 Cylindrical Photoelectric & Proximity Sensors  

The low cost CY-100 photoelectric and GX-M inductive  proximity sensors offer a wide range of models to fit your application needs.  Both sensors are available with 2m cable lengths or with M12 plug-in connector. 


Simple mounting, low cost

The New CY-100 series cylindrical photoelectric sensors provides a low cost, basic sensing solution. With 80 different models available in diffuse reflective, thrubeam, and retro-reflective sensing configurations, the CY-100 is a perfect fit for your low-end sensing requirements.   
Cylindrical sensors for metal sensing applications
With 84 models available consisting of 2-wire and 3-wire configurations with an optional M12 quick connect., the New GX-M series cylindrical inductive proximity sensors feature high speed response frequency, and a high environmental resistance making this series is the new standard for metal sensing in the Panasonic line. M8, M12, M18, and M30 sizes are available.
SMC Logo smcLEJ Series Linear Slider 

High rigidity slider with electronic motion control


The LEJ series is SMC's newest slider style.  The design goals included higher load carrying capability, greater moment loading, and high acceleration and deceleration.  


SMC LEJ Electric Slider The LEJ series includes two drive types, either a ball screw or a belt.  The ball screw offers high positioning repeatability, while the belt drive offers longer strokes and higher speeds. 

  • Ball screw driven LEJS carries loads from 30 to 85 kg 
  • Belt driven LEJB carries loads from 20 to 30 kg.
  • Maximum strokes of 1500mm (LEJS) or 3000mm (LEJB)
  • Maximum speeds of 1200 mm/s (LEJS) or 3000 mm/s (LEJB)
  • Positioning repeatability of 0.02mm (LEJS) or 0.04mm (LEJB)
  • Compatible controllers: LECSALECSBLECSCLECSS
  • Motorless specification available 


more information >

More payload and faster speeds

The new Epson C4 and C4L compact 6-Axis robots offer faster speeds and more payload capability while keeping the SlimLine design.  Epson C4 and C4L robots provide superior performance for even the most demanding and complex applications.

The slim body and compact wrist design allows for greater motion range and less mechanical restrictions. The robots can easily reach into confined and restricted work spaces from many angles with smooth motion.

Epson C4/C4L robots come with our new RC700 controller and provide the ultimate experience in ease of use, power and reliability. In addition, the RC700 controller also provides industry leading Epson RC+ Controls software and lots of fully integrated options such as: Vision Guidance, .Net support, Conveyor Tracking, GUI Builder, EtherNet/IP, DeviceNet and Profibus communication

turckPush-In Couplings for 1/4" OD Tubing
Audible "Click" ensures a secure connection

The LinkTech interchangeable quick couplings are particularly well suited for use on durable and disposable medical equipment, analytical devices, food & beverage applications, POU installations and water filtration applications.  
The new Push-in couplings offer the highest flow with no installation tooling needed.  The psh-in fitting is integral to the coupling, eliminating leak points and costs.  It connects with most plastic and copper tubing for easy connections.  They are designed and manufactured as trouble free with long service life.

more information >

Quick Links...
                   Our Website       Products      What's New      About Us      Contact Us
Join Our Mailing List