|
|
READY TO GO EQUIPMENT
IN STOCK at Alard, July 2009.
SOME
of our refurbished and good operational equipment available for
immediate shipment...
|
|

|
ELMAR Model RPE-428 ROTARY PISTON FILLER,
28 station. All stainless steel construction including base. 3"
diameter pistons with adjustable fill up to 36 oz maximum per piston.
Counterclockwise rotation machine with 10'L straight-through
infeed/discharge conveyor with timing screw to star wheel indexing.
Starwheel/straight through discharge or tangent discharge. Complete
with pneumatic no-can no-fill mechanism, stainless steel drip tray, and
(4) adjustable stainless steel legs. Baldor 3HP 208/230/460volt 3 phase
independent drive or can be seamer driven from (2) locations.
In
stock in VERY GOOD OPERATIONAL CONDITION, available for immediate
shipment.
You may view a picture of this machine at
http://www.alard-equipment.com/a-f/z6134.htm
OR find it on our general listings page under "F" for FILLER....
Ref. #:Z6134
|
|
|
|
GROEN Model RA-250, 250 GALLON STEAM
JACKETED KETTLE with SINGLE MOTION SCRAPER-AGITATOR. 52" diameter x 42"
center depth stainless steel hemispherical bottomed vessel with a
4"diameter center bottom outlet with Triclamp connection. Stainless
steel steam jacket manufacturer tagged for 100psi working pressure.
Single motion side scraper-agitator with (2) baffles suspended from
stainless steel agitator suppor
t bridge, with 2HP 230/460 volt 3 phase Reeves variable
speed drive with stainless steel drive motor.
An all stainless steel cooking kettle on stainless steel pipe support
legs set for a 19.50" discharge height.
Hydrostatically
pressure tested to assure no leaks, and otherwise in stock in
excellent operational, mechanical, and cosmetic condition, ready
to go, available for immediate shipment.
TWO available, our Y0162 & Y0163;
--you may view a pictures of these at
http://www.alard-equipment.com/g-o/y0162.htm
http://www.alard-equipment.com/g-o/y0163.htm
on
our general listings page under "K" for KETTLE.
CHECK our
online selection of KETTLES
|
|
|
 |
URSCHEL Model 30C SLICER, with 1/2 slots. Like
new bronze outer bowl and NEW inner bowl and stainless steel fingers.
Stainless steel knives, and like new stainless steel hoppper. Complete
with stainless steel vibratory sha
ker pan with oval slots. Steel support stand painted with stainless
steel paint. 1HP 208/230/460 volt 3 phase drive motor. In stock in EXCELLENT/
LIKE NEW mechanical and cosmetic condition and available for immediate shipment!
You may view a picture of this machine at
http://www.alard-equipment.com/p-z/z8534.htm
OR find it on our general listings page under "U" for URSCHEL, SLICER.
Ref. #:Z8534
CHECK
our online selection of URSCHEL CUTTERS!
|
|
|

|
FMC Model 3AR CORN CUTTER, with 30"
long dual stainless steel chain infeed, lubrication system, and NEW 3HP
3 phase 208/230/460 volt 3 phase drive motor. Complete with cutting
head for whole kernel corn (parts are available optionaly for creamed
corn cut). Cutting head aperture automatically adjusts to conform to
the contours of the corn for clean cut and efficient yield. We have a
newly-fabricated painted steel pedestal stand in stock for this unit
(shown in pictures, removed from the cutter for shipment). This corn
kernel cutter is thus in stock in EXCELLENT operational, mechanical and
cosmetic condition, available for immediate shipment.
You may view a picture of this machine at
http://www.alard-equipment.com/a-f/z6957.htm
OR find it on our general listings page under "C" for CORN CUTTER.
Ref. #:Z6957
|
|
|
 |
GORING KERR DSP 2 DIGITAL DROP THROUGH
METAL DETECTOR with REJECT DIVERTER, 5" diameter by 24" long plastic
drop-thru tube through an epoxy painted aluminum detection head
with 6" diameter aperture. The drop-thru tube leads to a Goring Kerr
model 402 stainless steel pneumatically actuated reject system. 3' drop
from infeed to product discharge. 5" square product and reject
discharge openings, with reject discharge facing to the right (as
perceived by someone standing at the control panel position). Head,
controls, and reject system all mounted on a stainless steel frame. 110
volt single phase electrical input. Note: The head comes mounted in a
stainless steel frame, but the stainless steel angle leg floor stand
shown in the pictures is something we use to set these on for
display purposes, and is not included unless otherwise negotiated.
In
stock in EXCELLENT operational, electronic, mechanical, and cosmetic
condition, available for immediate shipment!
You may view a picture of this machine at
http://www.alard-equipment.com/a-f/z9930.htm
on our general listings page under "D" for DETECTOR.
Ref. #:Z9930
CHECK
our online selection of METAL DETECTORS!
|
|
|

|
JMC BAG FILLER / SEALER, Model WBS-0715. A
fully automatic bagger designed to fill PREMADE wicketed bags,
accepting fill from most types of feeding devices (e.g
. scale, volumetric fill head, etc), shake the bag to settle the
product, compress the bag to squeeze out excess air, and seal the bag
with an integral heat sealer. Will accept hand feeding when equipped
with a foot pedal. All sanitary stai
nless steel construction / USDA listed bagger manufacturer
rated for "bag face size range" from 8" to 15" and fills from 1 to 40
lbs at speeds up to 20 bags per minute, with gentle product handling,
and fast tool-free bag changeover. PLC with touch screen control.
Temperature and speed controlled seal head complete with pneumatic
scrap removal and bag top trimmer. 110 volt single phase
electrical (standard household current) input, with 3cfm at 80psi
air requirement. Manufacturer specifies material capacity of LDPE films
1 through 6 mills, and recommends for a wide range of applications from
frozen meats, frozen seafoods, produce, baked goods, frozen pasta,
snack foods, seeds & grains, pet treats. Bagger ONLY, if you need a
fill head (e.g. a scale) ask your Alard Sales Rep for current
availability on a complimentary unit.
IN
STOCK in EXCELLENT condition, available for immediate shipment.
You may view a picture of this machine at
http://www.alard-equipment.com/a-f/z9075.htm
on our general listings page under "F" for FILLER.
Ref. #:Z9075
|
 |
NEW CORNELL
4-INCH AND 6-INCH FOOD PUMPS IN STOCK AT ALARD!
We generally
maintain a selection of NEW CORNELL FOOD PUMPS
IN SETOCK configured with vortex infeed
tanks and drives ready for immediate shipment.
We can configure the
drives to your horesepower, pulley ratio, or configure with variable
speed drives, to meet the point on the pump curve you
specify, or supply our STANDARD
CONFIGURATIONS shown below.
We stock BOTH
standard volute, and expanded volute models in BOTH 4" and
6" sizes. As an authorized Cornell pump dealer, we can
custom-order
any Cornell pump to meet your need.. CALL for current availability
315-589-4511. |
|
|

|
CORNELL 4" EXPANDED VOLUTE FOOD PUMP WITH
STAINLESS STEEL VORTEX TANK AND DRIVE. Cornell model 4NMPP-F5K
4" diameter inlet/outlet cast iron food pump flange-connected to a new
stainless steel tapered vortex infeed tank; 30" long by 21" wide
by 19" deep with 2" NPT drain and flanged 4" diameter inlet and outlet.
Complete with new 5 HP 208/230/460 volt 3 phase fixed speed belt and
pulley drive with stainless steel belt guard. Pump, tank,and
drive all mounted on a new tubular stainless steel support frame. Pump
manufacturer literature rates this hydro pump and drive
combination for approximately 135 gpm at 55 ft head; pump curve data is
available for other head and RPM factors.
Cornell's patented "expanded volute" makes for even gentler product
handling than the "standard volute" model. This pump carries a two-year
manufacturer warranty.
NEW!
You may view high resolution pictures of this machine at
http://www.alard-equipment.com/p-z/z2796.htm
OR find it on our general listings page under "P" for PUMP, food.
Ref. #:Z2796
|
|
|

|
CORNELL 6" EXPANDED VOLUTE FOOD PUMP WITH
STAINLESS STEEL VORTEX TANK and 7.5HP DRIVE. Cornell model 6NHPP-F16K
6" diameter inlet / outlet cast iron pump coupled to a stainless steel
tapered bottom feed tank 41" long by 33" wide by 19" deep; at a 35"
product infeed height, with a 18.5" height to center of return flange.
Tank has a 2" inner diameter NPT threaded (female) cleanout drain near
the return flange end, at a 14.5" discharge height. Pump and tank are
mounted on a tubular stainless steel frame in common with a 7.5HP 1,765
RPM 208/230/460 volt 3 phase drive.
According to manufacturer literature (pump curve available on request)
capable of approximately 500 gallons per minute at 55 foot head with
solids handling ability for product up to 4" diameter by 6" length.
Cornell's patented expanded offset volute design feature makes for much
gentler product handling.
NEW, with two-year manufacturer warranty.
You may view high-resolution pictures of this machine at
http://www.alard-equipment.com/p-z/z2795.htm
OR find it on our general listings page under "P" for PUMP.
Ref. #:Z2795
|
WANT TO SEE MORE, LOTS MORE?
Check our full GENERAL LISTINGS
page,
or surf our whole website at http://www.alard-equipment.com
FOR FREQUENT UPDATES CHECK OUR RECENT ARRIVALS BLOG
We provide
frequently updated, as-detailed-as-possible listings of newly available
items on our "Recent Arrivals "blog" at: http://www.alard-equipment.com/recent/
FOR LESS DETAIL, FOLLOW US ON TWITTER
NEW! We now post
CONCISE one-line listngs of newly available items via TWITTER. To
follow these, access our TWITTER page at : http://twitter.com/alardequipment
ONLY ONCE A MONTH
We'll be sending
Email featuring some of our newly received or located items YOU may be
interested in, as well as passing along any new goings-on here at
Alard. To confirm your continued
interest in receiving our emails,
click HERE, to UNsubscribe
from our monthly Email broadcasts, click at
the very bottom of this Email.
DO YOU HAVE
EQUIPMENT TO SELL OR TRADE?
We're always looking
for good used food processing and packaging equipemnt to buy for
inventory, or list for reseale. If you have packaging or processing
machinery to sell or trade, CALL and let us know! 315-589-4511 |