 How To Use PW Sensor | | PW Sensor |
Open the battery compartment and pull the tab to remove the plastic insulator to active the power to the sensor. Remove the protective film on the display.
Press the program button to enter the program mode. At any time, programming mode can be exited by pressing and holding the program button for 3 seconds. The sensor will automatically exit programmin mode if no buttons are pressed for 20 seconds.
Press the up or down buttons to change the value of any field. When the correct value is reached press the program button to advance to the next field. Continue until you have set the hour, minute. AM/PM, month, day, and year fields.
 | | Play Video Demonstration |
When you reach the humidity set point field, select the lowest humidity value than you are comfortable with. We suggest 50% or more. Once you have set each field hold the program button for 3 seconds to exit the program mode.
Place the sensor in your instrument case and monitor it daily. If the humidity is to low in the case use a humidifier. Fill your humidifier with distilled water to help prevent excessive tarnish on silver plated keys.
To display the lowest temperature and humidity readings, first press and hold the UP Button and then the Memory Button. The lowest temperature and humidity will be displayed along with the time and date it occurred. This can be very helpful to know exactly what climatic conditions your instrument was exposed to and the date and time it occurred.
To reset the lowest readings press the Memory and Program Buttons at the same time. The screen will flash twice to indicate the reset has taken place.
.
|
Please let us know how we may better serve your needs in the future and be sure to "Like" us on 