3) Take one heart and one hoop. Place the heart in the center of the hoop and wrap one wire around one side of the hoop (I went around 8 times). Be sure to keep the heart centered in the hoop. Tuck the end of the wire under a couple of wraps and trim closely. Repeat for the other side. Your heart should be secured to the hoop. Make sure it does not sit too high in the hoop as your earlobe needs some space in there. Gently ease the wire down if needed. Then add a couple of drops of beading glue to the ends of the wire on the heart and on the hoop. Put aside and allow to dry. Repeat for the other earring.
4) Now get your crystal beads ready.
a) Put all your peach beads onto headpins with wrapped loops. I did 3 wraps around so that they are really a feature in the earring.
b) Put 4 of your jet hematite beads onto headpins and make an open loop on each but DO NOT TRIM THE WIRE as you will need to put them onto the hoops later and do a wrapped loop to secure them.
c) Put 10 of the jet hematite beads onto eyepins and again make an open loop on each but DO NOT TRIM THE WIRE as you will need to put them on the hoops and secure them with a wrapped loop later.
d) Attach one of the headpins with peach beads (prepared in Step a) on each of the eyepins you prepared in STEP c.
5) Now you are ready to make all the attachments to your earrings! Take your headpins with a single jet hematite bead and attach them to the two outer rings on your hoops. Finish with a wrapped loop on each. Next, attach your jet and peach 'dangles' you made in Step d to the remaining rings on your hoops with wrapped loops. All finshed!!!!
TOP TIPWhen doing wrapped loops with crystal or glass, be sure to trim your wire as close as possible to avoid having to 'pinch the ends in' too much with your pliers. You will end up breaking the ends of your crystal with the pressure. Also, leave plenty of the headpin/eyepin free to do your wraps around.

I love the Light Peach crystal with Antique Copper. It really brings out the metal's tone nicely. Other color combinations that would look nice are Turquoise and Chalk White, Crystal Copper and Indian Sapphire, Jet and Crystal Golden Shadow.....I could go on and on!