|
Where:
WRc, Swindon, Wilts
Frankland Road
Blagrove
Swindon SN5 8YF
|
|
|
Greetings!
I'd like to invite you to claim a Free Place at the next in our series of Factory Automation seminars, this time in the south of England.
Back by popular demand, this seminar addresses the
key practical issues arising from the use of digital communications technologies
in automated manufacturing and advanced engineering applications. Covering the
use of PROFIBUS and PROFINET in key application areas such as packaging,
printing, electrical and electronics assembly, robotics, automotive
engineering, drives, mechanical handling and logistics, control systems and
energy management, it focuses on the practical aspects of using PROFIBUS and
PROFINET in factory automation applications from system design and safety
considerations through to maintenance and fault-finding.
Supported by
demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production Engineers and System
Engineers involved in design, operation and maintenance of modern automated
factories and machinery.
Standardised in IEC 61158,
PROFIBUS and PROFINET provide state of the art digital communications addressing
all the needs of the manufacturing and materials handling industries,
significantly lowering capital expenditure on installation, commissioning and maintenance.
They offer unprecedented integration of automation, control, monitoring and
safety systems using standardised and widely supported communications and
networking solutions.
The seminar is ably presented by fieldbus
specialists Andy Verwer of VTC, Alan Bollard of Westermo, Derek Lane of WAGO, Mark
Freeman and Peter Brown of Siemens Automation & Drives. Attendance is
free of charge to pre-registered delegates from the User community, i.e.
companies that own, operate, design, build or maintain automated plant.
This is what delegates have said about previous presentations of this seminar: "Very well
presented and a lot of useful information" "Fantastic as always and very
informative" "Superb day
for experience and information"
If
you'd like to learn how to simplify your PROFIBUS automation application ...
don't miss this one-day Seminar!
Agenda (Registration and Coffee 9.30 am)
(Please note
that the agenda can be flexible on the day and the presenters are happy to
dwell on areas of specific interest. Questions
are encouraged throughout the day. All times are approximate.)
10:00
Introduction
including PROFIBUS and PROFINET Update
10:20
Practical
steps for a successful PROFIBUS Project
11:00
Introduction
to Profinet
11.40 Coffee
12.00 Using
Industrial Ethernet Networks for PROFINET
12:40 Lunch
13:10
Commissioning
& Maintenance - Fault finding
13:50
Coffee
14:05
Profinet
Configuration including the integration of Profibus and Profisafe
14:45
Summary
and the next steps
15:00
Questions
and Close
Please use the link below to register - but don't delay as places are limited!
|
|
|
|
If you have any questions about the event or how to register, please contact Ann Squirrell at ann.squirrell@profibus.com, tel: 0044 207 193 8108 . Thanks for your attention and response, we look forward to seeing you at our event.
Sincerely,
Bob Squirrell
The PROFIBUS Group
bob.squirrell@profibus.com
0044 208 144 9597
|
|
|
