Small Appliances
Cook with small appliances.
Cook with your toaster oven, electric skillet and slow cooker for
specialized jobs, rather than the range. Small appliances use less
energy.
Use the microwave. Microwave ovens shorten cooking times, which saves energy.
Clean or replace air filters.
Replace filters on exhaust hoods, humidifiers, vacuums, etc. Clogged
filters impair performance and cause the units to run longer.
Run cold water for disposal.
Hot water requires energy to warm the water. Cold water saves energy
and solidifies grease, moving it more easily through the garbage
disposal and pipes.
Refrigerators
and Freezers
Purchase an ENERGY STAR model.
When buying a new refrigerator or freezer, look for the ENERGY STAR
label. ENERGY STAR refrigerators and freezers can save you hundreds of
dollars on your electric bill over the life of the appliance. Remember,
older refrigerators and freezers use two to three times more
electricity than ones that are 10 years old or less.
Select the right size. Determine your household's needs before purchasing a refrigerator or freezer. One that is too large wastes energy.
Only use one refrigerator or freezer.
You can spend up to $120 in electricity per year using a second
refrigerator or freezer. If you want to use a second refrigerator or
freezer during holidays or for special occasions, turn it on one to two
days before you need it.
Don't set the temperature colder than necessary.
Set the refrigerator temperature between 36° F and 42° F. Set the
freezer control so the temperature is between -5° F and +6° F. A small
thermometer placed in the refrigerator or freezer will help you set it
correctly.
Clean the unit.
Clean dust off the condenser coils, fins, evaporator pan and motor once
or twice a year. A clean unit runs more efficiently. Unplug the unit
and clean with a vacuum cleaner or long-handled brush.
Defrost a manual-defrost unit regularly. Frost makes your unit work harder and wastes energy. Don't allow more than one-quarter inch of frost to build up.
Stay away from direct heat.
Place the refrigerator or freezer away from direct sunlight and other
heat sources such as ovens or ranges. Heat will cause the unit to use
more energy to stay cold.
Do not place the unit in unheated space.
Don't place your refrigerator or automatic defrost freezer in a garage,
porch or other unheated space. If the temperature drops below 60° F,
the unit will be less efficient and cost more money to operate. Or, the
compressor may stop running, causing the temperature inside the freezer
compartment to rise. Stored food could spoil.
Check the seals.
Refrigerator and freezer doors should seal tightly. Loose seals cause
your unit to work harder and use more energy. If you can move a dollar
bill through the closed door, the seal is not tight enough. Get the
seals replaced or replace the unit if it is an older model.
Dishwashers
Run full loads.
Always wait until you have a full load before running your dishwasher.
Full loads use the same amount of hot water and energy as smaller
loads. You run fewer loads and save energy.
Use short cycles. Select the shortest cycle that properly cleans your dishes. Shorter cycles use less hot water and less energy.
Skip rinsing the dishes. Rinsing dishes before loading them into the dishwasher wastes energy. If you do rinse, use cold water.
Clean the filter. If your dishwasher has a filter screen, clean it regularly. A clean appliance runs more efficiently.
Ranges & Oven
Reduce the heat.
Begin cooking on a higher heat setting until liquid begins to boil.
Then, lower the temperature and simmer the food until fully cooked. A
fast boil doesn't cook faster than a slow boil, but it does use more
energy.
Don't peek in the oven.
Resist the urge to open the oven door while baking. Every time you
peek, the temperature drops 25° F and requires additional energy to
bring the temperature back up.
Use retained heat. Turn off cook tops or ovens a few minutes before food has completed cooking. Retained heat finishes the job using less energy.
Consider a natural gas range or oven. Natural gas appliances cost less to operate than electric appliances and offer better temperature control.
Put a lid on it. Cook food and boil water in a covered container whenever possible. This traps the heat inside and requires less energy.
Make sure the oven seals tightly.
Make sure the seal on the oven door is tight. Even a small gap allows
heat to escape and wastes energy. If you can move a dollar bill through
the closed door, the seal is not tight enough and should be replaced.
Check the oven temperature.
Test the oven temperature to be sure that the setting matches the
actual temperature. If the actual temperature is too high, you will use
more energy than needed. Also, your food may not turn out how you
anticipate.
Washers & Dryers
Adjust the water level.
If you have a washer that allows you to control the load's water level,
adjust the level according to laundry load size. You can save energy by
using less hot water for small loads.
Run full loads.
Always run a full load in your washer or dryer. Running a partial load
uses the same amount of energy as a full load - but you get less done.
Running full loads allows you to run your washer or dryer less often.
Wash laundry in warm or cold water. Washing laundry with warm or cold water works your water heater less. Use hot water only when the greatest cleaning is needed.
Rinse in cold water. Rinse water temperature has no effect on cleaning. Rinsing with cold water saves money by heating less water.
Place the washer close to the water heater.
Water loses heat as it flows through pipes. When the washer is located
near the water heater, hot water doesn't have to travel as far to reach
the washer, and less heat is lost. Insulating the pipes between the
water heater and washer helps retain heat, too.
Don't dry clothes excessively.
Drying laundry excessively uses more energy than is needed, and is hard
on fabrics. If you purchase a dryer, get one with an electronic sensor
that shuts off the dryer when clothes are dry.
Clean the lint filter.
After each load, clean the filter to keep the dryer running
efficiently. Also, periodically check the air vent and hose for
clogging. Keeping the air vent and hose free of lint prevents a fire
hazard.
Humidifiers & Dehumidifiers
Use a humidifier.
Humidity makes you feel warmer in colder months. With the proper
humidity level, you'll be able to turn your thermostat down to a lower
temperature, save energy and still feel comfortable. About 20 percent
to 40 percent relative humidity is recommended.
Remove moisture with a dehumidifier.
Use a dehumidifier in warm, humid months. Less humidity helps you feel
cooler, allowing you to use a higher air conditioner setting to save
energy. A dehumidifier works best when air can circulate freely through
it. Place it away from walls and bulky furniture.
Check for frost build-up on dehumidifiers.
If your unit is running in temperatures less than 70° F, check it
occasionally to see if frost is building up on the coils. If so, turn
the unit off until the frost melts and the room is warmer.
Clean the unit. Dust or vacuum the dehumidifier at least once a year before you plug it in. A clean unit runs more efficiently.
Purchase an ENERGY STAR dehumidifier.
ENERGY STAR dehumidifiers use 10 percent to 20 percent less energy than
conventional models but still offer the same features - effective
moisture removal, quiet operation and durability.
Central
Air Conditioners
Purchase an energy-efficient model.
Select an energy-efficient central air conditioner by looking at the
SEER (seasonal energy efficiency ratio) rating. The higher the rating,
the more efficient the unit.
Choose the right size equipment.
Oversized equipment costs more money. A qualified heating contractor
can determine the size of the equipment needed for your home. The
contractor uses the size and configuration of your home to determine
proper size.
Replace coils. To maximize efficiency, change the indoor and outdoor compressor coils when replacing an older central air conditioner.
Keep the thermostat clear of heat.
Don't position heat-producing devices such as lamps and TVs close to
your thermostat. Heat from these devices could cause the thermostat to
read a temperature higher than the true room temperature. This may lead
to excessive cooling and wasted energy.
Get your unit tuned up.
Have your central air conditioner tuned up by a qualified heating
contractor every other year. This can help the unit operate more
efficiently and may prevent failures in the middle of peak cooling
season.
Keep the condenser and filter clean.
Keep leaves, grass and other debris away from the outside condenser.
Also, clean the filter monthly and replace it as needed. (Your central
AC uses the same filter as your furnace.) A clean condenser and filter
help the unit run more efficiently.
Change your thermostat settings.
Save 10 percent or more on your summer cooling costs by setting the
thermostat to 76° F when at home and higher when you go away. Cooling
the house when you return costs less than keeping it cool all the time.
Keep the sun out.
Closing blinds, shades and drapes on the sunny side of your home during
the day will help keep the house cooler, causing the air conditioner to
use less energy in bringing the temperature to a comfortable level.
Cool only the rooms in use. Close unused rooms to keep cooled air in areas where it is most needed.
Don't make more heat.
Delay chores that produce heat and moisture until the cooler parts of
the day or evening. Limit dishwashing, laundering and cooking on hot,
humid days. These activities make your room more uncomfortable and
require your air conditioner to work harder.
Use the microwave. Cook using your microwave oven rather than your standard oven or range. It creates less heat and humidity in your home.
Turn off electronics you are not using.
Don't leave electronics, such as televisions, stereos and computers, on
if you don't need them - they produce heat. Extra heat requires more
energy to power the air conditioner and increases cooling costs.
Keep vents clear.
Keep furniture and drapes away from air vents. This allows the cool air
to move out into the rooms and keeps your air conditioner from running
more than necessary.
Ventilate your attic.
Reduce heat build-up in your attic by installing proper ventilation.
This helps keep your house cooler during the summer. A qualified
heating contractor can help you do this.
Keep the air conditioner out of the sun.
Locate the unit out of direct sunlight and avoid the south and west
sides of the house. Placing the air conditioner in direct sunlight
causes it to work harder to cool your home.
Room
Air Conditioners
Purchase an ENERGY STAR model. ENERGY STAR room air conditioners cost at least 10 percent less to operate than conventional models.
Use a timer. Set the plug-in timer to turn off the air conditioner when you leave home and to turn it on just before you return.
Purchase a unit with varying fan speeds.
Use a room air conditioner with fan speed control. This allows faster
cooling when needed and quieter, more efficient operation at other
times.
Keep the unit centrally located.
To allow better air circulation, install your room air conditioner in
the window or area of the wall that is nearest to the middle of the
space being cooled.
Seal the unit.
Once a room air conditioner is in place, seal the space around it with
rope caulk or some other sealant to prevent warm outside air from
leaking in.
Don't set the thermostat at high initially.
When you first turn on your room air conditioner, set the thermostat at
normal or medium. Setting it any colder won't cool the room any faster.
Keep the unit out of the sun. Locate your room air conditioner on the shady side of your home. It will operate more efficiently in a cooler location.
Close the fresh-air vent.
Make sure the fresh-air vent is closed when the room air conditioner is
operating so you aren't cooling outside air. Open the vent when the
outside air is cooler to let in fresh air.
Remove the unit at the end of the cooling season.
Take your room air conditioner out of the window when the cooling
season is over. If you must leave the unit in place, cover the outside
of the unit with a weatherproof cover and fill any cracks around the
unit with removable caulk.
Fans
Use fans with your air conditioner.
Fans help reduce energy costs by circulating the cool air from your air
conditioner. This allows you to raise the temperature and still be
comfortable. Use oscillating fans for greater circulation.
Use ceiling fans for air circulation.
In hot weather, set the ceiling fan direction to blow air down. The air
moving across your skin creates a cooling effect, allowing you to raise
the temperature on your thermostat and still feel cool. In cold
weather, set the fan to blow toward the ceiling. This pushes warm air
away from the ceiling and evenly distributes heat in the room.
Use a whole-house fan.
These fans are mounted in the attic and ventilate your entire home. Be
sure to open some windows before turning on a whole-house fan. A
qualified heating contractor can help you determine if you need a whole
house fan.
Maintain your fan.
Keep your fan in good working order. Check the manufacturer's
recommendations for care and maintenance. This helps control the
operating costs.
Heating
Purchase an energy-efficient furnace.
Select an energy-efficient furnace model by looking for an AFUE (annual
fuel utilization efficiency) rating of 90 percent or greater.
Maintain the furnace. Clean your furnace filters monthly or replace if necessary. A clean unit runs more efficiently.
Use natural gas for heating. Consider switching to a natural gas heating system. Natural gas is less expensive than other heating fuels.
Use insulation.
Insulate your attic to an R-value of 38 for a gas-heated home and 50
for an electrically heated home; your walls to an R-value of 19; and
your sill box (upper portion of your basement walls) to an R-value of
10. Proper insulation allows you to use less energy to keep your home
warm.
Insulate around windows and doors.
Weather-strip and/or caulk all areas of noticeable leaks around windows
and doors. Removable caulking is a good option for windows that you
open in summer but not in winter.
Change your thermostat settings.
In the winter, set your thermostat at 60° F when you are sleeping or
gone. Set the thermostat to 68° F when you are at home. This can save
10 percent or more on your heating bills every winter.
Turn down the thermostat when away.
If you are going to be away for an extended period of time, turn your
thermostat down to save energy but never lower than 40° F. If you have
delicate houseplants, keep the setting at 50° F or higher.
Let the sun in.
The sun's energy can have a noticeable effect on the temperature in
your home, especially from windows facing south and west. Keep window
shades and drapes open during winter months to let in the sun's radiant
heat.
Warm with a space heater.
A portable space heater can heat a single room without using your
furnace to heat the whole house. Using a space heater to heat all or
most of your home costs more. Always follow the manufacturer's safety
instructions when operating space heaters.
Use the fireplace sparingly.
Many older natural fireplaces are inefficient and draw more heat out of
the house than they produce. Close the flue to eliminate drafts when
not in use.
Consider fireplace inserts, doors or covers.
If you use your fireplace often, consider these products to help reduce
the heat loss in your home when using the fireplace. You save money on
your heating bills while still being able to enjoy your fireplace.
Control air flow.
If you are building a home, replacing heating equipment or remodeling,
talk to your heating contractor about the options available to ensure
proper air flow. Controlling air flow into and out of your home ensures
energy efficiency, comfort and low energy costs.
Purchase ENERGY STAR windows.
When installing new windows, select, at a minimum, double-paned
(double-glazed) thermal windows. With existing single-paned windows,
make sure you use storm windows during the winter months.
Office
Purchase efficient equipment.
Look for ENERGY STAR office equipment, such as computers, printers and
fax machines. They use less energy than standard office equipment.
Don't let the computer run all day.
Only power on the computer, monitor, printer and fax machine when you
need them. Don't leave them on after you're finished working. Computers
and other office equipment still use energy in sleep mode.
"Keeping the lights on"
For more information,please call...
503-620-9111
CCB 147298
