|
Your Rockwell PLC, Everything Else Ethernet/IP
|
EtherNet/IP™ was introduced in 2001 and today is one of the most developed, proven, complete and OPEN industrial Ethernet network solutions available for manufacturing automation in th e United States.
EtherNet/IP allows networks, including remote I/O, motion and safety to communicate seamlessly on the factory floor. Our vendors like Festo, Sick, Cognex, Wago, Red Lion and eWon offer automation solutions that utilize EtherNet/IP to interface with your Rockwell PLC to provide unsurpassed performance at a fraction of the cost of their traditional Rockwell alternatives.
|
|
eWon offers Remote Access Solutions for your Rocwell PLCs with all the security of a VPN connection but without the hassle
Internet Based Remote Access from Anywhere
eWON technology combines a modem, an IP router, drivers for both seri al and Ethernet PLC protocols, and a processor for autonomous management of communication tasks, and it offers additional services for PLC parameters.
This unique combination lets you benefit today from numerous technological advances. You can interact with the PLC parameters directly from the eWON web-based front end, making remote service and support much quicker and easier. Moreover, the eWON unit embeds the technology and security necessary for handling Internet connectivity, making it just as easy to access PLCs across the Internet. Easy and secured Internet connectivity.
- Support for both Ethernet and serial devices
- Choice of embedded modem : PSTN, ISDN, GPRS, 3G, A
DSL...
- Supports communication to SLC5, PLC5, MicroLogix, Compact Logix and Logix family
- Direct access to PLC variables through specific DF1 and EtherNet/IP™ drivers
- Web enabled services : display data on web pages, write data on web forms, send reports by email
Learn more... |
|
Fast, Robust & Decentralized Alternative for
Electric and Pneumatic Motion, Valves, I/O, Regulators and Presssure Displays from Festo
The Festo CPX Terminal integrates Ethernet/IP communication opening up a new realm of control possibilities. The CPX terminal is the ideal platform for  electrical peripherals. It supports all worldwide established fieldbus systems and all customised installation standards. Simple, flexible and integral connection of pneumatic and electrical control loop systems to an automation system.
The CPX-CM-HPP or CPX-CMXX motion control blocks are modules in the CPX manifold that offer flexible (1-8 axes), powerful (simple point to point or complex interpolated profiles) and cost-effective ways to integrate motion control.
The control component is independent of the fieldbus node used.
This means that Festo's electric drive technology is compatible with all industrial communication interfaces including Ethernet/IP.
Learn more...
|
|
FlexiSoft Safety Gateway from Sick interfaces directly with Rockwell to ensure machine safety
Sick's FlexiSoft gateway is a powerful, modular and easy to commission safety gateway/controller that can be efficiently adapted to the requirements of a variety of safety applications due to its scaleability. Function blocks and logic  functions can be combined using the intuitive user software. Thanks to this modular hardware platform, the controller grows module by module with the task - up to the highest level of safety. The design of safe system solutions is significantly simplified as a result. The integration into fieldbus environments like Ethernet/IP and the related bidirectional communication between sensors, actuators, controllers and the control level make Flexi Soft particularly interesting for small to medium-sized machinery.
- The FlexSoft Controller can read from the gateway or the gateway can write automatically to it.
- With the aid of the gateway one has full access to the system and EFI devices over Ethernet TCP/IP.
- The system configuration can be expanded with a maximum of 2 gateways.
Learn more... |
750 Series I/O System from Wago provides unbeatable price/performance ratio
The WAGO-I/O-SYSTEM 750 is the most compact and modular I/O system for decentralized automation. Ethernet/IP is one of the many fieldbus options available with the WAGO-I/O-SYSTEM providing a seamless interface for your machine control needs. I/O modules offer built-in power contacts. Freely mix analog, digital and special function (serial, counter, stepper, etc.) modules in the same node.
With its decentralized Ethernet/IP fieldbus system featuring finely modular components, the WAGO-I/O-SYSTEM is approved for extremely diverse applications. The system is optimized for process-oriented communication and is a scalable-performance solution for high integration density with an unbeatable price / performance ratio.
|
|
|
|
|
|
|
212° The Extra Degree This video by Sam Parker and Mac Anderson shows you that it's the extra degree of effort that often separates the good from the great. 212° The Extra Degree captures that simple, yet powerful concept. Play Video
|
Events & Training Schedule
Day 2
|
|
