News from Smart Vision Lights

Newsletter

Camera to Light Release

June 2012

Home - Products - Technology - Product Videos - News & Events - Contact

Greetings!

Smart Vision Lights is proud to announce an all new series of Camera-to-Light products that make integration with today's advanced imaging systems simple & easy. Any camera with a 5pin M12 output connector can utilize these prouducts that pass power, ground, and strobe triggers throught to a single or multiple lights. Single light applications can benefit from a CTL Jumper Cable and multiple light or high intensity light applications can utilize the CTL Break Out Board. Read on for an introduction to our new CTL series by Smart Vision lights.

Camera-to-Light Direct
5PM12-CTL Jumper Cables

Introducing the latest accessory line to the Smart Vision Lights family...The all new Camera-to-Light Jumper Cables. CTL Jumper Cables simplify the integration of most SVL single light applications by connecting the light directly to the camera. Power, ground, and NPN/PNP strobe trigger are all passed through safely and easily without having to wire the light to an external power supply. This is achieved through any 5pin M12 output connector on today's smart cameras.

For more information on Camera-to-Light Jumper Cables, CLICK HERE TO READ ON.

Join us on the following social media platforms.

To join our mailing list Click Here.

Introducing...BOB
CTL-IO-4 Break Out Board (BOB)

The CTL-IO-4 Break Out Board (BOB) is DIN rail mountable and simplifies the installation of multiple lights with the ability to support the most powerful LED arrays offered by Smart Vision Lights. Simply provide 24VDC & ground directly to the BOB and any of our standard 5pin M12 Jumper Cables from the strobe source or camera system. When the I/O module is connected to a strobe source or camera system the I/O board runs up to 4 lights using industry standard M12 connections. Lights draw power from the I/O module and NOT the camera. The 4 Light outputs can draw 6 amps of continuous current or 24 amps of strobe current from the I/O module. The BOB supports NPN/PNP and stores energy for high output strobing to support OverDrive Series lights.

For more information on the CTL Break Out Board, (BOB), CLICK HERE TO READ ON.