PFA QUICK DIE CHANGE FOR METAL STAMPING
DOWNLOAD QUICK DIE CHANGE CATALOG |
The design and functionality of the Un-Coiler allows operators to change coils more quickly. Once an Un-Coiler is loaded, the operator simply guides the first coil around the drum and into the production machine's feeding mechanism - an operation that takes about five minutes. When the top coil runs out, the operation is repeated on the next coil and so on. Those five-minute intervals multiplied by the number of coils on a pallet add up to a fraction of the time it takes to change coils on single coil systems. There's no replenishment and hoisting time between coil changes. Further, thanks to the Un-Coiler's superb tension control, it helps to reduce misfeeds and tool breakage, another dramatic timesaving feature.
The Un-Coiler LEVER LIFT coil payoff is the newest development in coil feeding equipment for materials loaded on reels. Flat strip or wire reels can be loaded in the vertical position without additional lifting equipment or strenuous operator labor. Coils can be placed on the drive rollers without effort speeding up coil turn-around time; decreasing production downtime. Quick set up of the strip through the variable speed control also minimizes time and operator effort. Simply roll the reel on its flanges up to the LEVER LIFT, position the supporting rollers, and lift up to 2000 lbs off the floor with one handed effort. Variable speed control responds to the pull of the strip and feeds material automatically to meet demand rate. |