Graffiti is a huge problem!
Graffiti presents major issues throughout the world, creating a very expensive problem for property owners everywhere.
Where visible, graffiti has an enormous negative impact on customers and the public with regards to their perception of an area or building which has been defaced.
Responding to the problem Nanolia is introducing an advanced range of environmentally friendly products for easier-than-usual graffiti removal. Nanolia's bio-degradable anti-graffiti products have been proven to work on many different surfaces including, metals, concrete, brick, stone, glass, plastic and wood to offer an alternative in the fight against graffiti. The coatings meet all relevant requirements of the German Quality Association Gütegemeinschaft Anti-Graffiti e.V.
Nanotechnology provides a clear defence against graffiti
Based on the latest research into nano-coating technology, Nanolia Protect is an ultra thin (approx 5 - 20μm) two-part clear coating with amazing properties including exceptional gloss retention and long term weather resistance making it ideal for exterior applications such as street signs and outdoor advertising. Surfaces treated with Nanolia Protect are highly resistant to soiling and chemical attack, able to be easily cleaned without the use of special chemicals. In addition, Nanolia Protect restores dull and tired paintwork, chalky glass-fibre surfaces and cloudy, tired anodised aluminium to their former glory. Treated surfaces gleam as new and are restored to their original colours while most metal surfaces are given the added benefit of long-term protection against corrosion. The coating is ultra-thin and has a high cover rate of about 50m² - 80m² per 1kg on non-porous surfaces. Only one coat is required.
For application to previously painted concrete or stone surfaces Nanolia supplies a "less glossy" version of the product that provides even greater anti-graffiti properties. AG Protect Matt can be applied directly to porous surfaces, or over acrylic emulsion if colouring is required. A cover rate of 50 - 80m² per 1kg can be achieved, with only a single coat required. Surfaces previously coated with other products can be "refreshed", sealed and protected on a long-term basis.
Nanolia even has a treatment for absorbent mineral substrates. AG NanoliaCrete is a permanent water-based graffiti protection. Free from organic solvents, once dried it forms an invisible, hydrophobic, oleophobic, breathable and weather stable surface resistant to solvents and acidic and alkaline attacks. Paints and coatings cannot penetrate the surface and thus adhere only weakly. NanoliaCrete also reduces the growth of algae, lichens and mosses.
Surfaces treated with either Nanolia AG NanoCRETE or Nanolia AG Protect Matt will still "breathe".
Removal of graffiti after an attack
Applying AG Remover Gel
Surfaces treated with Nanolia's anti-graffiti coatings and impregnations are relatively easy to clean. Defacement by marker pens is resisted by the surface and can be simply "pearled-off". More adhesive markings such as cellulose spray paints can be easily removed using Nanolia's AG REMOVER LIQUID or AG REMOVAL GEL up to 6-8 times without having to renew the protective layer. Nanolia's AG Protect Matt can withstand over 25 aggressive cleanings. Simply brush the liquid or gel on, leave to penetrate the graffiti and then rinse off with water.
Nanolia's standard graffiti removers are easy to use, environmentally friendly and biodegradable. They are specifically designed for the rapid removal of all types of graffiti from surfaces that have been previously treated with AG NanoCRETE or AG Protect Matt. The product is available as a liquid for use on non-porous surfaces or gel for use on both porous and non-porous surfaces. Surfaces previously treated with Nanolia AG NanoCRETE will still remain porous -so use the gel, while surfaces treated with Nanolia AG Protect Matt will be non-porous - use liquid or gel. For vertical surfaces or materials that require a longer dwell time for the remover to take effect, the Gel would be the better choice.
Nanolia even has a remover for surfaces that have not been previously treated with Nanolia's Anti-graffiti products. Nanolia AG Removal Gel PRO is especially suitable for the removal of graffiti, emulsion paints and latex colours and enables acrylic plaster, acrylic, alkyd, styrene and NC varnishes to be readily removed with water. It can be used to remove multiple coats of paint, adhesive fabric and foam carpet remnants and has even been used to remove tar from carpet pile without removing the colour - one of the most difficult cleaning tasks imaginable!
Spray paints, felt-tip pen and pen pollution as well as car paints and coatings are removed quickly and easily without leaving any residue.
As with all Nanolia's Ant-graffiti products, Nanolia AG Removal Gel PRO is environmentally friendly, being biodegradable, free of chlorine, hydrocarbons, strong acids or alkalis.
More information about these products can be found on Nanolia's website at www.nanolia.com/graffiti
