COST SAVINGS: We understand that products need to last and perform first and foremost but at the end of the project if you can save hundreds if not thousands of dollars in material cost, why not at least consider it?

 

Our THIN-FINISH Pre-Mixed Overlay for instance is engineered to create skim/base coats, splatter textures and knockdown finishes, slate trowel down systems and even surface repair systems. The fact is, THIN-FINISH costs as average of $0.12 to $0.18 per square foot, per coat making it perhaps the most cost effective and durable thin overlay system available.

 

Another example is our CSS EMULSION which is our hallmark clear protective sealer. CSS must be diluted with either xylene or lacquer thinner before use and no single component acrylic sealer is tougher or lasts longer. At an average cost of $0.08 to $0.12 per square foot, no sealer is as cost effective either.

 

LABOR SAVINGS: There is a saying in the decorative concrete business, "Material cost is immaterial." Saving a couple of dollars here or there is great but if you are using a product that takes days longer to complete the project, you are wasting money.

 

Example: Imagine applying a base/skim coat or a surface repair coat to a 1,000 square foot driveway project. It is safe to say that even with an assistant, it will take you the better part of 1 to 2 hours minimum. However had you used THIN-FINISH for the same application, you would be done in less than 30 minutes. Don't believe it? We don't expect you to so ask us how we can prove it.

 

Flooring example: If you are in the decorative concrete business, you have probably applied an acid stain or dye floor. Gone are the days of rinsing, neutralizing and waiting. With REFLECTOR Enhancer Flooring Systems, you are in and out the same day and you can create much more beautiful finishes.

 

Again, we fully expect you to assume that what we have said is just sales pitch but allow us to prove to you that these are all facts. Each and every month across the U.S. and Worldwide, installers of other products are making the switch to Elite Crete Systems because there is a difference...

 

Find out today where you can see our products first hand by visiting us online at www.elitecrete.com or send us an email at info@elitecrete.com to request additional information.

 

- Arkansas: May 15th & 16th

- California: June 5th & 6th

- Colorado: May 29th & 30th

- Illinois: May 14th & 15th

- Indiana: May 29th & 30th

- Missouri: May 22nd & 23rd

- Kentucky: May 22nd & 23rd

- Maryland: May 15th & 16th

- Michigan: May 8th & 9th

- Minnesota: June 5th & 6th

- Montana: May 15th & 16th

- Nebraska: May 30th & 31st

- Nevada: May 29th & 30th

- North Carolina: May 29th & 30th

- Oregon: May 22nd & 23rd

- Pennslyvania: June 12th & 13th

- Texas (Dallas): May 16th & 17th

- Texas (Houston): May 22nd & 23rd

- Wisconsin: May 14th & 15th

- Canada (Didsbury): May 8th & 9th

- Canada (Vancouver): May 29th & 30th

- Canada (Winnipeg): May 11th & 12th

- India: May 22nd & 23rd

- Panama: May 16th & 17th

 

Sign Up Today by CLICKING HERE.