Traction Clean our low foam safety degreaser is formulated to provide the cleaning and soil suspension properties necessary to effectively clean and maintain positive slip resistant characteristics in a wide range of settings.

 These include restaurant and food service areas, restrooms, nursing homes, hospitals, and light industrial manufacturing facilities where food, protein-based soils, light oils, and dirt can cause slippery conditions. Detergents and surfactants effectively break down and suspend soils, removing the potential cause of many slippery floors. Special additives increase the coefficient of friction beyond the level normally inherent in the existing floor surface. Extensive laboratory and field testing on various types of flooring (including resilient tile, ceramic and stone tile, sealed wood, and concrete) has demonstrated this product's ability to raise the coefficient of friction readings beyond those required by the Occupational Safety and Health Administration, and the 0.6 SCOF recommended by the National Floor Safety Institute, ANSI, and Americans With Disabilities Act.

For routine cleaning of floors, walls, food preparation tables or other hard surfaces in food service areas, dilute 1 part Grease Cutter with 32 parts hot or cold water (4 ounces per gallon). Diluted solution may be applied with a pressurized sprayer, pressure washer, automatic scrubber or mop. Allow the solution to work for   several   minutes then agitate with a brush, scrubbing machine, or automatic scrubber. Remove the soiled solution with a wet vacuum, automatic scrubber or mop, then rinse the surface thoroughly with clean water, and allow it to dry. Dilution ratios of Grease Cutter may be increased or decreased; 4 ounces per gallon (1:32) for routine cleaning to 12 ounces per gallon (1:10) for heavy duty degreasing.