Burgener Nebulizers use the patented, enhanced parallel path method that produces a superior mist when compared to other pneumatic nebulizers. You'll notice increased stability and greater sensitivity. Teflon gas and sample capillaries are employed for purity. Non-stick materials minimize salting and reduce clogging.
All models shown here fit regular chambers as a direct replacement for glass concentric nebulizers.
QB001 - Ari-Mist HP, ultra low sample flow, enhanced parallel path nebulizer has a higher operating pressure of 80psi. It can operate on 0.005 to 1.0 ml/min. Good for LC/ICP/MS, only for samples that are particulate free.
QB003 - Ari-Mist, low sample flow, enhanced parallel path design has a standard operating pressure of 40-50 psi. It can operate on 0.050ml/min to 1.0 ml/min. Good for ICP and ICP/MS, only for samples that are particulate free.
QB007 - Teflon Mira Mist enhanced parallel path nebulizer can operate on 0.2ml/min to 2.5ml/min and can handle a high level of particulates in sample. It operates on standard pressures of 35-45 psi. The Teflon Mira Mist can be used for any liquid. For ICP and ICP/MS.
QB008 - PEEK Mira Mist functions the same as the Teflon Mira Mist (QB007) but is a little easier to handle. This model is NOT for use with concentrated acids or for some organic solvents.
QB009 - Enhanced Parallel Path, Huge Sample Capillary (750microns / 1/32") is designed to handle a very high level of particulate in samples and is essentially unpluggable with un-dissolved particles. It has a standard operating pressure of 30-45psi and can operate on 0.5ml/min to 3.0ml/min. The QB009 can be used for any liquid.
|
