Shanghai show
AGS Animation
Des replacement ad
AGS ad  
  
Follow us on Twitter
Find us on Facebook
Brian signature block 
Header 600 px final
18th June 2012
Greetings!

 

Last week's survey

In the last week's survey , we asked -  Do you think the NBN will be beneficial to your business? If so, why?

 

Maybe                                                             1%
Not at all - a big waste of time and money     60%
I think it wll be great for business                   39%  

 

  • At what cost will it be to have and use the NBN service? This is all unknown? The rest of the world seems to be going Wireless so why is Australia going in the opposite direction to everyone else? Oh that's right, we're apparently the smart country leading the way with taxing Carbon as well.
  • The NBN is like a chain, it is only as good as it weakest link. Therefore if you are downloading/uploading or sending/receiving large emails, then your connection will be at the speed of the slowest link in the chain. Our present system of about 20000 Mbper second is fast enough for almost any application. Obviously if the whole world is on fibre, then that's the perfect system, but the whole world is not on fibre. A fibre network is wonderful but not at the bankrupting cost that this stupid government have locked in for us. Yet another stuff up by Labor.
  • We will have access to the NBN at the end of the year, so we have been told, but only because we work in a Labor held seat. We can happily live without and grow our business without NBN.
  • NBN might save a few seconds with faster file transfers, but that's all.
  • I think it depends on your present ADSL hook up. Ours is quite adequate for our business needs and we have no need for anything faster at present. The NBN hook up will inevitably cost more and it seems like they will be forcing the connection on people.
  • We have ADSL and our telephone exchange will need a major upgrade for NBN and I do not think that will happen. Also, many areas around us without ADSL and I believe they will take precedence.
  • I already have NBN & it does make a difference. Mostly in file transfer. In the past, sending a file over 6mb or so was not possible. Now I can email up to about 18-20mb. & downloads from a file sharing site takes no time at all. (e.g. 50mb file in about 15 seconds)
  • The internet is now roughly where computers were in 1985. Think about what has happened to computers over the last 25 years and think where the internet will be in another 25. You just need a hint of imagination to see what will be possible.
    Of all businesses - printing, photography and graphic arts all stand to benefit fairly obviously from having very high speed, very reliable data transmission systems to accept files etc. from clients, for sophisticated online ordering systems, for communication...this sort of first level service industry is the sort of thing we SHOULD be very good at, and competitive in.
    Cords (i.e. fibre) - *always* beat wireless, easily. Throughput at the business/internet end of things is not just about peak speed - it's about consistency over time. Anyone with extensive experience of wireless and satellite will always choose fibre over wireless given the chance - and for every development in wireless there is also development in transmission over cables.
    $40 billion is a LOT of money. But over the useful lifespan of this infrastructure it will end up well less than $2 billion a year - less than we spend on all sorts of far less obviously useful things (like propping up industries we're clearly no longer competitive in).
  • We are already of ADSL 2 and thats fast enough and very reasonably priced, definately will not help us that I can see.
  • I don't understand the hype or why it will be so great for business. It will make the internet speed faster with a couple of added benifits but if you are already using, trading on and making money out of the internet then why is it going to be such a "huge" benefit to your business???? This is just another bit of bullshit positive spin that this Labour government is trying to baffle the voters with.....It is there just to create some jobs for some people at the tax payers expense.....to make the unemployemnt figures look better.
  • No longer relying on bad telstra lines, fast efficient and competative rates.
  • Given I am now using a cloud based tool to track my sales and jobs and if MYOB come to the party on features and price, my accounting as well,then yes it will be a great tool to have. Plus the ability to use YouTube for the odd instructional video or to transfer files around. We have an issue right now when it rains with our connection that a new line will also resolve.
  • I understand it will be faster but our current bandwidth is more than sufficient for all the jobs we receive. We've enver had any sort of bottleneck at all. I think it is mostly to be used for mega-downloads of videos, such as porn

(These survey questions are sent in by our readers. Please spend a minute to give your answer to this week's survey as one or possibly more of your industry peers thinks this question is important and wishes to see your point of view as well as others in the industry.)

 

If you have a subject that you would like us to survey, please send your subject to brian@wideformatonline.com. Thanks.)  

Plasimage banner

Have your say about industry matters, use the  'new' Forum
Latest Discussions and questions on: Finding an Apprentice...........; Pantone Colours in VersaWorks or RasterLink..........; Hourly rates..........; China.........; ColorPainter H-74s.............
Latest Question - Pantone Colours in VersaWorks or RasterLink .............
                               Links to our useful directories:
The Green Product Directory

If you or your products are not listed in the appropriate director, click the link at the top for the application form for a free listing
Bannercity V2

The weekly Classified Ad Mailer   

If you would like to run a 2nd hand machinery, staff vacancy

or any other ad in these sections in the next two broadcasts to our database of +/-8500 wide format print industry professionals across the ANZ region.

 

Just click here for magazine free ads only.  

 

EOFY Stock Clearance Items
GJS Machinery
have an extensive list of EOFY clearance items -
click here to view 

 --------------------------------------------------------------------------------
Conect Enterprises
have a very special offer on Metamark 7 Series -
click here to view.
    

--------------------------------------------------------------------------------
Trotec Laser have
an EOFY special, click here to view For more information on Trotec EOFY special offers, phone 1800 674 499
--------------------------------------------------------------------------------
Paper Please EOFY specials, click here to view.
--------------------------------------------------------------------------------
AGS Power Digital - End of Financial Year Clearance - up to 50% off selected sublimation inks, metals, mugs, photo gifts, promotional products, thermal transfer and more.
Run out clearance on MultiRIP Software, HybaJet (Screen printing) Inks for Epson and AccuBlack Film Positive media. Click here to view
--------------------------------------------------------------------------------
Leapfrog Machinery EOFY special offers - click here to view.
--------------------------------------------------------------------------------
DGS Mimaki EOFY special offers - click here to view  

                 --------------------------------------------------------------------------------

 

MACHINERY FOR SALE (Scroll down for Machinery wanted)  

 

(NSW, Newcastle) Roland SP-300 versacamm ecosolvent printer/cutter. Good condition. Includes Roland ColourRip software. $7000. Contact David on 0417 673 560 or email david@synchro.net.au
(Posted 14th JUne 2012)

(VIC, Melbourne) Mimaki JV33-160BS
solvent ink jet plotter. ONLY 12 months old. Includes Onyx rip software and Rasterlink rip software. Pick up only. $18,000 (+ GST) ONO..Phone (0417 056 850)
(Posted 14th June 2012)

(NSW, Hornsby) XRITE EYE ONE PUBLISH PRO
+ PROFILEMAKER 5 PLATINUM. - $2500.00 ex GST
As new. Located in Hornsby. 0294764600
(Posted 13th June 2012)

(VIC, Braeside) JV-1300
pigment ink printer powers up for sale as is & Mimaki pigment ink in bags (out of date) 19 cartridge - Make An Offer Tel: 0408270722
(Posted 12th June 2012)

(VIC, Melbourne) WELDMASTER C-MIT Vinyl Welding Machine
up to 3metres long with attachments for rope,kedar and making pockets. Near new Extra keday thrown in. Price $18950.00 ONO Pick Up Only. 03 9421 1881
(Posted 12th June 2012)

 

(NSW, Springwood) For Sale Canon large format printer ipf8100 perfect condition, new printheads, 44" print width, Onyx Rip software, Full ink tanks. print paper or canvas. PH 0422-569309
(Posted 9th June 2012)

(NSW Fairfield) Roland SP-300V Print and cut
$6500.00  Machine is approx 4 years old, regularly serviced, in excellent condition. Only selling to upgrade to a wider machine. Call Alen 0403 869 822
(Posted 7th June 2012)

(QLD, Meadowbrook) Roland SJ-1000 printer
with IS-1000 bulk unit. 2.6m wide, excellent condition, hardly used, bought May 2006. Located in Logan, Qld. $16K ono pick up only. Call Darrenn on 07 3200 8299
(Posted 6th June 2012)

(VIC, Beremboke) Mimaki 160s
+ program Rasterlink Pro 2, machine was working well, replaced new head by tech & serviced, still prints in 4 colour, seems problem with maybe mother board - LC/LM. is sitting in idle mode so heads dont dry up. (refurb or parts) $2000.00. Tel: (03) 5360 8355
(Posted 5th June 2012)

(NSW, Camperdown) Complete setup for sale.
$18,000 - 64" Roland VS640 Printer/Cutter with original TU2 take up (2011 model 2xCMYK), $4000 - Royal Sovereign RSC1650 64" (2011) laminator w heat assist and auto feed/take up system. $750 Keencut Javelin 2.6m (102"). All EXCELLENT condition, just over a year old.  Relocating overseas.  Various tools and equipment also for sale. Benches etc. Feel free to call with any questions or arrange inspection. Tel: 0419 162 981
(Posted 5th June 2012)

(QLD, Gold Coast)StarFlex NSP-18 Banner for Lightbox  
1520mmx50m I have 4 rolls $200ea and Gross white (grey)adhesive vinyl 1350mmx50m 10 rolls $50ea June:0468529880 sunnycr2009@gmail.com
(Posted 5th June 2012)

 

(QLD, Ferny Hills) Gerber Edge Printer and GS15plus Cutter $10,000
Various Foils and Vinyls all colors and sizes $4000 Tel: 0458158628
(Posted 1st June 2012)

(VIC, Geelong) Taimes Seiko 6 Colour 1806D
Eco Solvent Wide Format Printer. Near new demo 1800mm banner printer indoor/outdoor, includes stock (18 rolls), 43 bottles ink, solvent plus PC and software. $6990 Tel: 0418109292
(Posted 31st May 2012)

(NSW, Sydney)Backlit solvent/ecosol film
1270mm x 30m I have about 15 rolls that we no longer need $100 individually or $75 ea the lot locate Sydney call tony 0412 743929
(Posted 30th May 2012)

(VIC, Melbourne) Apollo HVLP Turbine Spray Gun Model 725
- Only 1 owner, works as it did when first purchased. Paid over $1200, selling for $600. Contact Sarah 0421595852 or sarahseeb@live.com.au
(Posted 29th May 2012)

 (VIC, Melbourne) Epson 9880
44" Large Format Printer- only 3 years old perfect condition, 1 owner. $3,900. Please email sarahseeb@live.com.auPh: 0421 595 852
(Posted 29th May 2012)

 (VIC, Strathewen) Roland vinyl trimmer
1800mm cut , 12 months old no longer required bought larger trimmer . excellent condition $700.00. Tel: 03 9714 8647
(Posted 28th May 2012)

(NSW, Mid North Coast). Lamkote 2R60 laminator.
Rubber rollers near new. Comes with foot control (machine is 240 volt). Rubber wheels are 1360mm wide. Machine in good working order. $750.00. Hafco Woodmaster panel saw. 3 Phase moter, cuts 2400 x 1200mm sheets. Set up for cutting acrylic. Comes with dust extractor wood blades. $700.00 PH 0423370899.
(Posted 28th May 2012)

 

(TAS, Hobart) Roland CM300 Signwriting Cutter + Stock - MUST GO THIS WEEK - $3400
Good Condition, Reliable, Had since new.
Materials include vinyls Callon II, Avery, Metallics, TShirt, Window Frosting, Plaster Wall, Pounce Paper, etc., small/medium/large amounts of different colours accumulated over many years, 3 aframes. An excellent starter.
A fair price will not be refused as it will simply save me moving it interstate. Have a look, no reasonable offer will be refused, MUST GO
sandyshaz@hotmail.com
(Posted 25th May 2012)

(QLD, Yeerongpilly) Oce TDS800 wide format toner printer.
High metreage, but a lot of life left in the old girl yet. 2 drawer multi roll, with mono scanner, motorised collection tray. Serviced by Oce since purchase.
Open to offers. Phone 0437 437 280 (Brisbane)
(Postd 23rd May 2012)

(NSW, Windsor) Equipment for sale,
please see attached picture.
location Windsor NSW 2756. Shop 9 / 192 George Street. promotebyprint@optusnet.com.au
Click here to see photo and prices of equipment
(Posted 23rd May 2012)

 

(VIC, Melbourne) For sale Mimaki JV3-160SP. Been de-commissioned as business is going a different route. Comes with x8 75% 3rd party cartridges. Will help with interstate buyers. Last used, Magenta starting to show banding - may require a head. Must be re-commissioned by tech. Comes with Laptop, roll of PP and all cables (NO-RIP). Giveaway @ $4500. (receipt upon request) Please ring 0451 922 922 or email info@nine22.com.au
(Posted 22nd May 2012)

(QLD, Sunshine Coast) Mimaki Jv3 160s
with photo print v5.0 RIP just needs one head stil prints fine, comes with new dampers take up reel bulk ink system still using the machine and need it gone as new printer coming.
$4000  Tel:0408887298
(Posted 21st May 2012)

(QLD, Sunshine Coast) Graphtec CE5000 120 cutter
has the laser locating eye for printing and cutting applications, brand new used only to cut one job. $3000. Tel: 0408887298
(Posted 21st May 2012)

(NSW, Mid North Coast) Optima 1318 CNC Flatbed router.
Bed size 1300mm x 2200mm (cut area 1300 x 1800mm). Machine is in good condition, comes with dust extractor and various router bits. PH: 0423370899. $7,000.00.
(Posted 21st May 2012)

 

(QLD, Meadowbrook) Mimaki JV3-160 SPT digital printer, full service history, HS ink, Excellent condition. $3500.00
Plus:
PC, tower, powerful set up to run Autodesk 3D imaging, with programme installed excellent condition, $2000.00
Ezy Taper, deluxe model, 1600 wide, up to 30mm substrates, Excellent condition, $3000.00. Ezy Taper inform me they will overhaul for $500.00 if so required. 
Bench Drill Press, $40.00
Bench Sander $40.00
Mobile work benches x 8, from 2400mm x 1200mm to 3700mm x 1800mm, from $50.00 each.
Metal drop saw, on metal bench with fold out arms, mobile, $80.00
Aluminium composite panels, 2440 x 1220 x 3mm. 0.3 alum both sides, 60 sheets, excellent for cutting & folding, does not snap, $30.00 each one lot sale
Vertical Wall Saw, 5000mm long x 2300mm high, excellent condition, approx 200 hours use, 3 phase, accurate cutting over 4000mm to +- 2mm, cutting blade & ACM folding blade, $5000.00
Extractor for either vertical saw or router, 3 phase, Excellent condition, $500.00
Office furniture, 4 desks, HP printer scanner, photocopier, price neg.
Spray booth, outside 8000mm x 4200mm, with an internal height of 2400mm. Back light signbox 6500 x 1600 wired, huge fan 4500 litres per second extraction, enough flue for a 6000 ceiling, sliding door opening 3500mm x 2400mm, 3 phase, 2 compressors, all tubes, air guns, masks, paints, thinners, new owner to move, $5000.00
All prices exclude GST.
Contact anthony@jlssigns.com.au or 0412 028 600
(Posted 18th May 2012)

(VIC, Cheltenham) Allwin 3200mm wide printer.
Model A3216A. With CMYK inks, good condition, includes Main Top rip software. Cheltenham Vic. $2500.00 OBO. Needs to go. call 0412 010 893 for info.
(Posted 18th May 2012)

(VIC, Fitzroy) HP Designjet Z2100 24" printer.
Suitable for refurbishment or parts.
$350.00 Tel:  0407766110
(Posted 17th May 2012)

(NSW, Surry Hills) EPSON STYLUS PRO 9880
For sale, great condition, $3000 O.N.O. SYDNEY, SURRY HILLS,
 0418120065
(Posted 16th May 2012)

(QLD, Noosaville) Screenprinting Carousel 6 colour 4 rotating bases.
Holds perfect rego,Platern suitabe for flash cure printing.
need room for new machine, $1800 & Freight.
info@imageon.com.au
(Posted 14th May 2012)

(QLD, Noosaville) Double sliding based air operated heat press
240volt 15 amp
Platens 500 x 400mm. brand new still in shipping box.
$2500.00 + freight info@imageon.com.au
(Posted 14th May 2012)

(NSW, Pennant Hills) Mutoh RJ-900C Dye Sublimation Printer
42" (Thornleigh) - Includes Motorised Take-Up Reel, Bulk Ink System, 4 x Rolls of Transjet 1070mm x 120m paper, 4 x CMYK 1 litre bottles of ink, 1 x Wastepad set, 3 x Portable Infrared Heaters, ONYX RIP Dongle. PLUS LOTUS LTS 500 Electromagnetic Heat Press - 650 x 950mm pressing area. PLUS EPSON 7600 with some rolls of paper. Surplus to our needs. Printer has Low Use and in excellent condition. The lot for $10,000.00 inc GST pick up only. Phone Ian on 0419 264 975, email: widg@bigpond.net.au
(Posted 10th May 2012)

 

(NSW, Pennant Hills) Mutoh RJ-900C Dye Sublimation Printer 42" (Thornleigh) - Includes Motorised Take-Up Reel, Bulk Ink System, 4 x Rolls of Transjet 1070mm x 120m paper, 4 x CMYK 1 litre bottles of ink, 1 x Wastepad set, 3 x Portable Infrared Heaters, ONYX RIP Dongle. PLUS LOTUS LTS 500 Electromagnetic Heat Press - 650 x 950mm pressing area. PLUS EPSON 7600 with some rolls of paper. Surplus to our needs. Printer has Low Use and in excellent condition. The lot for $10,000.00 inc GST pick up only. Phone Ian on 0419 264 975, email: widg@bigpond.net.au
(Posted 10th May 2012)  

 

(QLD, Wondai) ROLAND Sol Jet SC-500...Nice piece of equipement..Excellent working order..Print n Cut...Very affordable in running cost and parts.Little hours on clock...See it working...$9000 firm Phone Colleen 0431100431
(Posted 4th May 2012)  

      

This is only a partial list of 2nd hand machinery available. For the biggest and most up to date list of 2nd Hand machines available in our region, please go to

The weekly Classified Ad Mailer   

If you would like to run a 2nd hand machinery, staff vacancy

or any other ad in these sections in the next two broadcasts to our database of +/-8000 sign, print and wide format print industry professionals,

(All ads in this section are repeated in the free classifieds in Wide Format Online.)
 
 

                                            VACANCIES  

 

(VIC, Mulgrave) Print Estimator Come and join Active Display Group - Australia's award winning and leading point of purchase display and print solutions company.
We are seeking an experienced print estimator. The successful candidate will have a strong understanding of screen, digital and offset print manufacturing and will be able to estimate, budget and evaluate quotations from our busy sales team. A broad knowledge in all areas of POS, including previous experience with PRISM would be advantageous.
For full details on this exciting opportunity please use the link below to be taken straight to our employment section on our website
http://www.activedisplay.com.au/content/detail/employment
(Posted 5th June 2012)

 

(QLD, Brisbane) Full Time Printing Specialist to Digital Photocopier Machines. - Some knowledge of Creative Suite and Adobe Products, Photoshop, Illustrator and Indesign
- Ability in designing new artwork, editing existing files and preparing files for both digital and offset printing
- Assisting with printing and finishing products such as binding, laminating, trimming etc.
- Must have knowledge of MS Office products and email programs
- All training on printing machines and equipment for the position will be provided.
- All training on MYOB Retail Manager Software will be provided.
Tel: 0738314766
(Posted 1st June 2012)

(NSW, Wahroonga)  Sales/New Business Development
- Progressive large format print company located in Sydney requires a dynamic and sales driven person with experience within the industry to build sales as well as develop and maintain new business. The applicant must have a sales background, excellent interpersonal and communication skills, a passion for the industry and proven ability to meet targets. Excellent remuneration and opportunities for the right applicant.
To apply please forward your resume to: graphics@catalystgraphics.com.au
(Posted 28th May 2012)

(NSW, Tweed Heads) Wanted full time experienced signwriter
or person within sign industry for car wrapping, vinyl application and sign installation. Please email CV to tony@nrsigns.com.au
(Posted 21st May 2012)

 

(WA, O'Conner) Digital Large Format Printer & Finisher: Award winning large format print bureau specialising in exhibition displays and signage is currently seeking to fill a key full time position in our O'Connor office. Experience as a digital printer and finisher is essential to the role.
The ideal candidate will have experience in the following:
*    Artwork preparation using Adobe CS5 suite - Mac and PC
*    Dealing directly with clients regarding artwork matters
*    Working with Onyx RIP
*    Operating HP Latex, Dye Sub and Roland machines
*    Operating laminator and mounting machines
*    Exhibition graphic preparation
*    Vehicle wrapping and signage installation.
The successful candidate will report directly to the Production Manager.
Please forward your CV including a cover application letter by email or post explaining why you would be the right candidate for this position.
VE Graphics
martin@vegraphics.com.au
08 93315653
(Posted 16th May 2012)

(VIC, Prahran) Signarama Prahran seeks an experienced full time production assistant.
Must have experience in basic design and all types of production and installation. Manual driving licence essential. Open Mon to Friday 0830 to 1730. Only dedicated hardworkers need apply. Opens all doors to Signarama network worldwide. email prahran@signarama.com.au. with CV
(Posted 14th May 2012)

(NSW, Sydney) Sheetmetal Worker/Sign Fabricator for sign company in Kirrawee.
Fabrication, welding aluminium and steel experience necessary. Previous sign industry experience an advantage. Contact: mail@centralsigns.com.au
(Posted 8th May 2012)

 

(WA, Perth) Production Staff Required. Experience with Digital Printers and Rip Software. Vinyl plotters. Laminating and application of viny graphics to all sorts of surfaces and substrates.
08 9362 2222
(Posted 7th May 2012)  

 

(VIC, Melbourne) Area Sales Manager - Consumables & Hardware Melbourne
Spandex Asia Pacific is recognised as a total solutions provider to the Sign & Graphic Arts industry.  The role of our Area Sales Manager - Melbourne is critical to our commitment to excellence.  Your major challenge will be to grow and develop sales in a designated territory in the Melbourne western suburbs and some country areas. You will need a strong commercial and sales related understanding of the industry, although candidates with experience in related industries will be considered.  You must be a team player & a good communicator.  We offer an excellent salary, commission structure & fully maintained vehicle. Apply to: employment@spandex.com.au.
(Posted 3rd May 2012)

(WA, Perth) DIGITAL PRINTER REQUIRED.
Long established Display and Exhibition CO. located in Osborne Park (Wester Australia)
Requires the services of a skilled printer to join our team.
The successful applicant must be experienced in the following.
Manage stock and printer consumables.
Meet customer deadlines.
Laminate and mount displays.
Able to use Adobe CS Suite.
Familiar with colour management.
Experience with Colorgate RIP
For further information please contact
Bobd@toucan.com.au.
(Posted 2nd May 2012)

 

 

This is only a partial list of vacancies. For the biggest and most up to date list of vacancies  available in our region, please go to Wide Format Online magazine. 

                     BUSINESSES FOR SALE/WANTED

   

(QLD, Brisbane) Business Wanted Brisbane Looking to purchase Existing Sign Business on The Southside of Brisbane. Please email details through to julie@icatchers.com.au
(Posted 12th June 2012)

 

(QLD, Mossman) Sign Co for sale, Port Douglas, Mossman, Qld,, Roland VP540i, Roland CX24,all benches, tools, paint, media, compresors, jeep Trayback 4wd, ladders, furnished flat on site, 3 computers, software, owner going over seas
07 4098 3818
(Posted 15th May 2012)  

 

(NSW, Inverell) Signwriting & Printing business, established 1993. Owner operated (couple). Excellent client base. Good turnover and plant list. Potential to expand. $135,000 Negotiable. Keen to sell phone 02 67221655
(Posted 7th May 2012)  

 

(QLD, Park Ridge South) Business for sale: Digital Printing - (Part Time) Price is $38K Good return.
Includes:
Wide format printer/cutter + all equipment + training
Over 300 customer database including their artwork
Brisbane/Gold Coast - contact tc2011@bigpond.com.
(Posted 1st May 2012)

(QLD, Ipswich) Ipswich Area QLD. excellent offset & wide format printer is seeking a financial partner to set up new business. I am extremely hard working, looking for the next step up.Tel: 0411 078 769
(Posted 1st May 2012)

(NSW, Erina) Custom T-shirt Printing Internet Business For Sale: Established in late 2006 with a turnover of over $330000 this business has a huge potential particularly if you are a screen printer. We do the Direct to Garment and Digital printing in house and outsource screen printing. The advantages: - Top 5 position on Google for many key words; - Few websites established customyourshirt.com Toctopus.com Henstshirts.com; - Large database; - 2 DTG + dig Roland + Cutter + presses; The price: $100,000 + GST if applicable, can be relocated very easily, not opened to public, would recommend someone in a large capital City to take advantage of Google place.
I'm focusing on a new business so can't exploit this business to full potential, however can stay as a consultant to help you bit your competition with advise on online marketing. Email: benoit@customyourshirt.com.
(Posted 29th April 2012)  

 

(NSW, Camden) CBD office unit sale/lease - $249,000 Ex GST See link on homepage "mi-tshirt.com" Phil 0419484392 phil.cal@gmail.com This email address is being protected from spambots. You need JavaScript enabled to view it.
(Posted 19th April 2012)
 

 

(TAS, Hobart) Signwriting business: Includes Roland VP300 Printer/Cutter, Roland CM300 Cutter, PC, Camera, Materials, Data Files, Contacts & Handover. Ideal Springboard for a good qualified signwriter. Reluctant Sale. Offers over $20,000. Email sandyshaz@hotmail.com
(Posted 29h March 2012)

(VIC, West Melbourne) Small Sign shop, cheap rent, roland printer, multicam cnc, ezetaper,welding equ, guillotine, plenty of media, hand tools,ladders and equipment,est business 5yo, good customer base,ongoing work $50,000 call for more info 0404 005 667
(Posted 22nd March 2012)     

 

(QLD, Brisbane). TURNOVER $400 000+. Great location and every piece of equipment. Great customer base and incredible growth. Brain tumor is stopping me from going on. Need $280000. Martin 07 32760588
(Posted 15th February 2012)

(NSW, Condell Park) Sign Manufacturing Business and Building for sale.
Training provided, W.I.W.O. or owner willing to stay on for a period of time.
All machinery, stock included. In operation for 25 years. regular customers, simple to run 5 day operation,
suit husband & wife team. P.O.A . Ring Brett 0418 290 590
(Posted 24th January 2012)

(NSW, Bowral (Southern Highlands)) Trophy Centre,
Engraving including glass, Quality Business for sale, Training provided, W.I.W.O. All machinery, stock included. In operation for 19 years.P.O. A . Ring John 0248622388 or 0412806202
(Posted 23rd January 2012)

(NSW, Liverpool West) General Printing-Screenprint_Embroidery
good Customer Base. Would Suit Graphic Designer -Working Couple-Sign Maker
Plenty Of inquiries Re Signs.Estimated Turnover 2012 $300,000. WIWO $150,000 0428 259 606
(Posted 23rd January 2012)

(QLD, Gold Coast) "WANTED " Cash Buyer Looking For Sign Business
For Sale in GoldCoast QLD Region.Please email your details & asking price to: robinharle@hotmail.com This e-mail address is being protected from spambots. You need JavaScript enabled to view it or text your details to: 04500-39938
(Posted 23rd January 2012) 

 

(QLD, Yeppoon)General Sign Shop in Coastal town Yeppoon. All Equipment, roland printer ezytaper, and everything needed run shop. Cheap rent. More than 700 clients works completed in past 5 years. On a high traffic street. Husband and Wife team with a couple of casuals. Owners have another business and can't do both properly... There is plently of room to improve. The town is growing quickly and is the signage shop with a shop front. $75,000 inc stock Ph Owner 0413398749
(Posted 15th January 2012)

 

(QLD, Park Ridge South) Sticker & sign business.  Database with lots of customers. (SE Queensland)(Can service most customers from anywhere in Australia -On Line) Includes:  SP540 Roland printer - Ezy Taper - GX24 Vinyl Cutter - Neolt Trimmer -  Trolley with all tools needed - Javelin- Computers -  all up $28K ono. Email tc2011@bigpond.com for further info. Full Training included   UP TO 1 MONTH !! Owner retiring.
(Posted 7th December 2011)


This is only a partial list of Businesses for Sale/Wanted ads. For the full list please go to
Wide Format Online magazine

The Find A Printer directory - GET LISTED, IT'S FREE

With more and more print and sign buyers using Wide Format Online's Find A Printer directory as well other signies looking to outsource work, it pays to be listed in the "Find a Printer" directory. There is a directory for each state as well as New Zealand. If you have not taken advantage of the free listing in the Wide Format Printer/Sign Industry Directory, you could be missing out on sales opportunities. Click here to be listed free of charge.
The Supplier's Directory - GET LISTED, IT'S FREE
Exclusive Supplier's Directory - If you are an importer or manufacturer of products for the wide format and/or the sign industry and your company is not listed in this directory and feel it should be, please click here to be included in the directory. Click here to be listed free of charge.
You can use this facility to update existing listings as well.
Consider adding a logo or a banner ad to make your listing stand out in this popular directory.
TAFE News
TAFE Illawara
- click here for the latest newsletter
Coca Cola Security Cameras
Coca Cola Security Cameras

Suggestions and ideas - If you have any good constructive ideas for the improvement of our newsletters and the Wide Format Online magazine, we would love to hear from you. Just send me a note. Thanks.

A list of Australian and New Zealand public holidays can be viewed by clicking here.
 
 
Have a great week.

Kind Regards

Brian Stickland
Publisher & Editor
0422 667 385
brian@dezuma.com.au
WFOL logo

Newsletter sub button

 Sponsod ad 09 2011 

Ricky Richards

RTMS animation 2   


 

Fujifilm logo 

 

Celmac ad
Kodak animation
Spandex sponsor ad

Advertising opportunities