|
Spring, 2010 Newsletter Edition
Accurate Die Design Inc. has over 50 years of combined experience in the Tool and Die industry. We train and support SolidWorks-based Logopress3 Die Design software and Forming Analysis/Flat Blank Prediction software from Forming Technologies (FTI) and Logopress3. We are the U.S Technical Center and North American distributor for Logopress3. Our in-house experienced die designers use each of these products on a daily basis providing die design and forming analysis/flat blank prediction services.
Contact us at:
(262) 938-9316
|
CAD AVSHMEIP
Logopress3 Reseller, SolidWorks Reseller and Logopress3 Mexico Training Facility will have a booth at Fabtech/Metalform Show
Mexico. Stop by to see a demo of Logopress3.
BOOTH #1528
May 11th thru 13th
Mexico City |
Accurate Die Design, Inc. would like to thank the following SolidWorks resellers for their support of Logopress3. If you would like help finding a SolidWorks reseller in your area, please contact us. ***Click on their Logo to go to their website*** 
|
|
Accurate Die Design, Inc.
(262) 938-9316
April/2010 Newsletter Edition
|
|
Now is A Good Time to Buy a Motion Controller!
Our old favorite 3D Motion Controller the Space Pilot will become extinct very shortly. Right now you can buy refurbished units for $187.00 only from us.
This is for a limited time only. While supplies last. These units originally sold for $499.00. They are being replaced by the new Space Pilot Pro, which is our new favorite 3D motion controller. These new units sell for $379.00 (REDUCED) through Accurate Die Design Inc. Space Pilot refurbished units are previously used or modified units that have been thoroughly tested and verified by 3Dconnexion. All Space Pilot refurbished units are sold with 3Dconnexion's full 3-year warranty and are warranted against manufacturer's defects. All sales of refurbished units are final except for defective units covered by 3Dconnexion's warranty terms and conditions.
Call us today to place your order 262-938-9316. |
|  |
|
|
|
Logopress3� BLANK
for Inventor�
is now available 
Logopress Corp. has been in business for over 20 years and has devoted all their time to the development of die design software for the Tool & Die Industry as well as Flattening and Blank prediction software.
Logopress has now created a new version of their popular Logopress3 BLANK software (previously only available to SolidWorks users) that is integrated into Autodesk Inventor. Logopress3 BLANK has achieved Autodesk Inventor Certification for both Inventor 2010 and 2011. Logopress3 BLANK is Finite Element Analysis (FEA) flattening software.
"There is a very large demand for 3D modeling and for Inventor users to easily and quickly manage finite element forming analysis (FEA), flatten and perform blank prediction with a cost effective solution such as Logopress3 BLANK". "We are very pleased to have also developed and provided this solution for this large group of users." says Yves Thizzy, Managing Director of Logopress Corp.
Logopress3 BLANK is NOT only for the Tool and Die Industry.
Experience has shown that SolidWorks and now Autodesk Inventor users can quickly, easily and accurately flatten various applications such as:
� Automotive Type, Double Curved Surfaces
� Complex 3D Shaped Parts
� Cloth (Car Seats, Textile Industry)
� Plastics, Adhesives
� Leather (Shoes)
� Canvas, Nylon (Tents)
� Inflatable Objects
� Packing, Packaging
� Orthopedic Braces (Medical Industry)
� Curved Plasterboard, Swimming Pool Liners
Logopress3 BLANK - now available for
SolidWorks AND Autodesk Inventor
- Very fast and easy
- No formal training
- Iges, Parasolid, etc...
- Use solids or surfaces
- Automatic meshing
- Forming constraints
- Thinning & thickening
- Shows stress & strain
- Controlled animation
- Multiple applications for all kinds of materials
Call us today for a free 14 day fully functional trial version
|
|
Front Page News
Logopress3 3D Die Design Software will get you ready to compete in the new decade.
You can read the article by going to our website or at the American Tool, Die and Stamping News website.
|
Productivity in designing boosts productivity in production. An article in the January/February FF Journal Magazine tells how one Logopress3 customer, Oldenburg Metal Tech, has increased efficiency.
"One was to reduce mistakes that were getting down to the shop floor, and the other was to increase efficiency". Mike Schmit says. "Logopress3 just makes die design and tooling much easier and simpler to understand on the shop floor by making better prints. It's more organized and tailored to stamping dies. We have few mistakes now that get down to the shop floor, and it has increased efficiency."
"Right now, I would hate to design a die without Logopress3, " says Schmit. "I definitely recommend this software to anybody who's doing tool-design work. It makes my life a lot easier".
To read the article in it's entirety go to:
|
Technology Expo in St. Louis
"Destination 3D It's For Everyone"
Join Accurate Die Design, Inc. and local reseller FISHER/UNITECH on Tuesday, May 11th, for a conference and tradeshow highlighting these technologies:
-
Progressive Die Design
-
FEA - Flattening complex shapes
-
Data Translation
-
Configure to Order Software
-
Reverse Engineering
-
Inspection Automation
-
Design Automation
-
Quality Control
-
Computer-Aided Manufacturing
-
3D Printing & Rapid Prototyping
-
Speech Recognition Software
-
3D Mechanical Design
-
Enterprise PDM Solutions
If you are in the aerospace, medical device manufacturing, consumer product, machinery, mold, tool or die industries, you won't want to miss this. The event is free of charge.
Doors open at 8:30 am, with presentations beginning at 9:00 am. The event concludes at 5 pm. Please join us at:
St. Charles Convention Center
1 Convention Center Plz
St Charles, MO 63303-2152
Contact our office more information:
262-938-9316 |
|
Save On Logopress
3 BLANK for Inventor
Introductionary Offer On
Logopress3 Blank for Inventor |
| |
First Year Maintenance Service Included
Save $600.00
Call us today for a free 14 day fully functional trial version
Offer expires August 30, 2010 |
|
|
|
|
