Secure your Digital Data. The New DiskCypher™ is a hard drive encryption device that provides the most secure, cost effective and easy way to protect digital evidence in the field and during transport. DiskCypher™ encrypts data "on the fly" during the acquisition process, utilizes the NIST approved AES 192 algorithm and performs at SATA speeds.  More information. Download Product Data Sheet

 

FAST!: e-SATA connection to your PC or Laptop.

 

Secure Firmware upgrades:  Since the SDL's Firmware is the key to the unit's Forensic write-blocking functions it was important to develop a Firmware upgrade procedure which would be protected and not open to "hackers".  Unlike other manufacturers of Write-Block devices, ICS designed the SDL Firmware upgrade procedure to isolate the SDL Firmware as much as possible from outside connections. Some write protection manufactures have chosen to implement automatic Firmware upgrade procedures which could leave their product vulnerable to hacking attacks. 

 

Write attempt indicators: When a User connects and selects a drive or device on one of the SDL ports to be write-blocked there is a solid green status LED that indicates that this device is in use.  The other three drive status LEDs typically will not be used.  On the SDL however, these LEDs will start flashing green whenever there is an attempt to write to the drive or device that has been selected.  These flashing LEDs will give assurance to the user that the SDL is functioning properly.