In this section we will share with you helpful hints we've learned
along the way from our partners. These hints and recommendations will help you get the best
results from your filter. If you have any recommendations please email them to
pointonefilter@sawyer.com.
· If water
is very dirty and full of particulate, we recommend the system with a 1 ft hose
(SP180) rather than the 3 ft hose (SP1803). Although the 3 ft hose has a faster
flow rate, it will be harder to backwash when filtering very dirty water.

·
If water is very dirty and full of particulate, use a cloth to pre-filter the
water.
· If water is very dirty and full of particulate, let the water stand in a
separate container for a day and then decant the water from the top.
· When using very dirty water, backwash the filter after every bucketful or at
least daily.
· Do not store your bucket system or backwash syringe in the sun. UV rays may
damage the plastic over time.
· Keep the top of the bucket covered, but not sealed.
· When drilling the hole, make sure to de-burr (remove all excess plastic) from the
hole. Not having a clean hole can cause a leak.
· If bucket leaks at the fitment, try moving the o-ring to the inside of the
bucket.
· Only run water through the filter and not food products.
· More questions? see our
FAQs page