|
|
|
|
Winner!
MASS-STREAM® D-6300 Picks Up Some Hardware
The new M+W Mass Stream® D-6300 has been awarded the Silver Gas Award by Gases & Instrument International magazine!
The presentation was made at the PITTCON Exhibition in Orlando, and Nicolaus Dirscherl, Managing Director of M+W Instruments (left), and Chris King, General Manager of Bronkhorst USA (right) were on hand to accept the award.
 Each year Gases & Instrumentation International magazine recognizes innovative and exciting products that are new to the market.
Of note is that this is the second year in a row for a Bronkhorst product to be awarded a prize; last year (2009) the Mass View was awarded the Golden Gas Award. |
Vaporware
Liquid Delivery System with Vapor Control
In many cases small concentrations of vapors are made by bubbling a carrier gas through the fluid. This method requires optimium pressure and temperature control of the bubbler system, which is expensive. Moreover, the response time is very slow, the absolute accuracy is low and the bubbler system has a poor long term stability.
Bronkhorst USA propose a much more direct approach: control the required quantity of liquid to reach the desired concentration, under room temperature, with a LIQUI-FLOW or μ-FLOW liquid Mass Flow Meter. This instrument forms part of a CEM system in which the defined quantity of liquid is mixed with the carrier gas and vaporized.
The method is straightforward, and virtually any concentration can be made in a matter of seconds with high accuracy and repeatability.
Features
> accurately controlled gas/liquid mixture
> fast response
> high reproduceability
> very stable vapour flow
> flexible selection of gas/liquid ratio
> lower working temperature than conventional systems
> optional control by PC/PLC (RS232/fieldbus)
Flow ranges (based on water)
> 0.25 g/h to 1200 g/h
|
Have It Your Way
OEM Specific Solutions
Bronkhorst offers innovative solutions for many different applications in many different markets. The instruments are made to customers' specification, with configurations that are suitable for use in laboratory, industrial environment, hazardous areas or semiconductor installations.
FLOW-SMS
 |
The FLOW-SMS Series, is a compact mounting rail system with one or more mass flow or pressure sensor modules that can be combined with control valves, shut-off valves, mixing chambers, filters or any other functional module as per customer's request. The specifications are open for discussion.
MANIFLOW
 |
The MANI-FLOW Series originate from the demand of OEM's to design an economical solution that combines various functions into one compact device.
On a compact manifold one or more mass flow or pressure sensor modules can be combined with control valves, two- or three-way valves, shut-off valves, filters or any other functional module as per customer's request. On request, the system will be assembled, tested and packaged in a clean room.
IQ+FLOW Mutli-Channel
 |
Equipment manufacturers are looking for compact solutions to monitor or control the gas flow or pressure in their system.
Previously, conventional Mass Flow and Pressure Meters and Controllers have needed a footprint of 1.5". Bronkhorst has developed the IQ+FLOW Mass Flow sensor.
Due to the use of micro solid state technology (MEMS), Bronkhorst has been able to halve the footprint dimension to 0.75", thereby realizing the ultra compact flow and pressure controllers.
|
At Your Service
Direct Customer Service And Support
The Bronkhorst USA Service and Calibration Laboratory in Bethlehem, PA has been specifically developed to meet the needs of our US customers and, while fully traceable to National Standards, is intended to be flexible in its approach to providing practical service solutions.
Our service laboratory permits full service, re-calibration, and re-sizing capabilities for Bronkhorst existing end user customer base, along with final assembly and test for newly purchased devices required by OEMs or quick shipment to our end users.
Bronkhorst USA service capabilities include gas and liquid calibrations to support almost any existing installed Bronkhorst device in the U.S., including clean room capabilities.
Gas calibration capabilities include Air up to 1,250 slpm and actual gas calibrations on H2, N2, Ar, He and CO2 up to 10 slpm.
Our facility includes a liquid calibration station in support of the rapidly growing installed base of low flow liquid measurement and control Mass Flow Meters and Controllers. Flow capabilities range from 0.5 g/hr up to 2.0 Kg/hr.
A variety of support testing and quality control instrumentation in our service laboratory provides such quality checks as helium leak detection and pressure vessel
integrity.
|
Show Offs
Our Instruments Are On Display
Bronkhorst USA will be exhibiting at the SVC TechCon 2010 to be held in Orlando. FL on 19-22 April, 2010.
The SVC TechCon is a conference and exhibition put on by the Society of Vacuum Coaters. This will be the first year of our participation.
Bronkhorst USA can be found at Booth #825, and we would be happy to answer any questions or discuss an application.
| |
|
|
|
|
|
